Garaažitehnika ja autotarvikud

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
• The large fan ensures optimal cooling
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
• Quality electric motors equipped with motor protection switch
• Flexible armored hose line with heat protection prevents vibration breakage
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• With high-quality CONDOR pressure switch
• Star-delta switch with operating hours counter for 7.5 and 11 kW models
• Ready for connection with all fittings

• Simple and quick installation
• Ideal for compressed air and liquids
• Can be assembled without tools
• Fast, multiple disconnections possible
• Very good flow properties

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

• Suitable for compressed air with full free passage
• Temperature resistant from -20 ° C to + 180 ° C

• Smooth-running, oil-free V-unit
• High-quality maximum equipment
• Compressed air lines and containers with a long service life
• Comfort safety quick couplings for maximum work safety
• Comfortable, back-friendly transport in an upright position and without lifting

• Designed for demanding continuous use when oil-free and clean compressed air is required
• Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
• Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
• Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
• The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon

• Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
• One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
• Two comfort safety quick couplings
• High-quality CONDOR pressure switch
• One pressure gauge each for tank and working pressure
• Simple condensate drain via ball valve

• Flexible armored hose line with heat protection prevents vibration fractures
• Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through

• One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
• Two separate locking systems for maximum working safety
• No whipping of the hose line during uncoupling

• Transport back-friendly in upright position and without lifting
• Additional transport handle directly on the container
• Puncture-proof PU foam wheels
• Stable steering chassis with parking brake

• Fully automatic on-off operation
• With all safety devices
• Completely ready for connection

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
• Large fan ensures optimal cooling
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• Flexible armored hose line with heat protection prevents vibration breakage
• High-quality CONDOR pressure switch as standard
• From 7.5 kW as standard with star-delta switch with operating hours counter
• Ready for connection with all fittings

• Refrigerated dryer with integrated automatic steam trap for dry compressed air, longer service life of compressed air tools and avoidance of disturbances in pneumatic controls
• Fine filter for separating condensate and solid impurities with particles up to 1 μ in front of the refrigeration dryer

Equipment

• Automatic steam trap on the compressed air tank
• No unnecessary pressure loss


• Condensate conditioner for oil-water separation
• Important notes on condensate treatment can also be found in the section on compressed air preparation.


• Fine filter for separating condensate and solid impurities with particles up to 1 μm
• Compressed air quality according to ISO 8573-1
• As a pre-filter in front of the refrigeration dryer


• Refrigerated dryer with integrated automatic steam trap
• Pressure dew point at 5 °C, ambient temperature 25 °C, atmospheric dew point at -22 °C

• Simple and quick installation
• Ideal for compressed air and liquids
• Can be assembled without tools
• Fast, multiple disconnections possible
• Very good flow properties

function Description

• For treatment, the oil-containing condensate first passes under pressure into the pressure relief chamber.
• There, the overpressure is reduced, without causing turbulence in the subsequent separation tank for free oil separation.
• Carried coarse dirt particles are retained in a removable catch.
• In the separation tank, the oil settles on the surface through gravity separation and is led into the overflow-proof oil catch tank (version available on request).
• The filter makes the difference: The pre-cleaned condensate flows through the oleophilic pre-filter, which has a large active filter area. Flowing through from the inside to the outside, it binds the remaining oil droplets and also absorbs residual, floating oil in the filter chamber.
• In the OEKOSORB® main filter with cartridge technology, the last oil components are reliably retained. What remains is water for direct discharge into the sewage system.

The advantages at a glance

• System-compatible size
• Installation on wall possible with ÖWAMAT® 10 and ÖWAMAT® 11
• Long service life of the filter units
• Easy retrofitting of a heater at any time
• Easiest handling by cartridge technology
• Type approval with and without free oil separation
• No energy costs

Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• For separating solid contaminants up to 1μm.
• Operating temperature 1.5 to 65 ° C, absolute compressed air quality according to ISO 8573-1.
• for safe separation of condensate and particles
• Complete with filter element and float valve

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Optimized oil separation system
• High-quality equipment
• Smooth and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

High-quality equipment

• Compressed air tank hot-dip galvanized inside and out, 15-year guarantee on the tank against rusting through
• Steering chassis with parking brakes and large, puncture-proof PU foam wheels for comfortable transportation without lifting
• Flexible armored hose line with heat protection prevents vibration fractures

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

• For connecting two housings with each other
• Angle for wall mounting included
• Connection set can also be used with housings from other manufacturers