Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Rotation direction control for the motor, prevents damage during start-up or after a change of location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Easy to service: simple removal and installation of all components requiring maintenance
Latest generation IE4 permanent magnet motor for max. energy efficiency
Larger speed/load range
Larger delivery volume supply range
Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
Very quiet operation - only 64 dB
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Advanced and efficient cutting-edge technology in the smallest possible space
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Two-stage compression 2-cylinder high-performance unit with cast iron cylinder block
The low speed ensures quiet, low-vibration operation and a long service life
Large fan wheel for optimal cooling
High quality electric motor with high torque
Electric motor equipped with motor protection switch
With phase inverter for easy manual reversal of the direction of rotation
Intermediate and aftercooler reduces the formation of condensation
Maintenance block with two pressure gauges for tank pressure and working pressure and high quality CONDOR pressure switch
Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
Fully automatic on-off operation
Ready for connection with all fittings
Increased flexibility
By connecting the second compressed air tank, the container volume is doubled, whereby a higher air supply can be established
An increased demand for air can thus be covered in the short term.
The second compressed air tank can be disconnected from the compressed air supply e.g. for chiselling or sandblasting. This halves the container volume and pressure builds up faster.
Equipment details:
K version with refrigeration dryer with integrated automatic steam trap as standard
Pressure dew point 5 °C, compressed air inlet temperature 35 °C, cooling air temperature 25 °C
K version additionally with pre-filter for separating condensate and solid impurities with particles up to 1 μm
Compressed air quality according to ISO 8573-1
As a pre-filter in front of the refrigeration dryer
KK version with automatic steam trap on the compressed air tank
This condensate drainage without unnecessary pressure loss
Condensate conditioner for oil-water separation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
From 7.5 kW standard with automatic star-delta switch
Fifteen-year rust-proof warranty on inside and outside hot-dip galvanized compressed air tank
Quality electric motor
High quality electric motor with motor protection switch
Start-up capacitor and start-up relief valve for easy start-up
As standard with phase inverter for easy manual reversal of the direction of rotation
Compressed air compression via high-performance aggregate HOS
The start-up relief valve ensures a light, pressureless start
The two-cylinder high-performance cast iron unit and the low speed warranty a particularly quiet and low-vibration operation ; this ensures a long service life through minimized wear
Optimal lubrication of the compressor for long service life and reliability
Equipped with high-quality intake filter
Aftercooler with large cooling fins causes low boiler inlet temperature and less humidity in the compressed air to protect the compressed air tools
additionally with intercooler to the aftercooler
Corrosion-free valve plates for improved heat dissipation and longevity of the compressor.
Optimal cooling of the compressor due to large Fan and cooling air guide on the cylinder
Sturdy belt guard made of metal for optimum protection of the components and for high user safety
No vibration breakage of the compressed air supply into the boiler due to flexible armored hose line with heat protection
High-quality drive belt
Powerful and economical drive
The toothed drive belt makes it easier to start, improves smoothness and power transmission, and reduces power consumption by up to 30%
Sturdy metal belt guard
Service block operation
Equipped with a high-quality CONDOR push button switch with a robust push button function for fully automatic on / off operation
Air extraction on the maintenance block via a comfort -Safety quick coupling
On the maintenance block only fixed screw connections, no hose connections
High-quality boiler with durable rust protection
AIRCRAFT was the first manufacturer to do so The compressors of the AIRPROFI series are equipped as standard with internal and external hot-dip galvanized boilers. Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
For separating solid contaminants up to 1μm.
Operating temperature 1.5 to 65 ° C, absolute compressed air quality according to ISO 8573-1.
for safe separation of condensate and particles
Complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Suitable for installation even in noise-sensitive areas and the direct working environment
Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
High-quality Condor pressure switch
Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
Quality electric motor with motor protection switch and start-up relief
Facility for easy tensioning of the V-belt
Service-friendly design
Ready for connection with all fittings and safety devices
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
This ensures a longer life due to less wear
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
High quality electric motor with high torque
Electric motor equipped with motor protection switch
With high-quality CONDOR pressure switch
Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
Ten-year rust-through warranty on powder-coated compressed air tank
With all safety devices
Fully wired
Stable belt guard made of metal
Including swinging elements
Connection to grid by qualified electrician
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Maximum, robust equipment and best quality at a reasonable price
Fully automatic on-off operation
With all safety devices
Completely ready for connection
Quality electric motor
Quality electric motor with high starting torque is equipped with a motor protection switch
Starting capacitor and starting relief valve ensure easy starting
Phase inverter as standard for easy manual reversal of the direction of rotation
Compressed air compression via high-performance HOS unit
The start-up relief valve ensures easy and pressureless start-up
The two-cylinder high-performance unit made of gray cast iron and the low speed warranty particularly quiet and low-vibration running and a long service life
This ensures an even longer service life due to even less wear and tear
High-quality compressor with optimum lubrication for a long service life and high reliability
Equipped with high quality intake filter
The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the air tools
Additional intercooler to the aftercooler
Corrosion-free valve plates for improved heat dissipation and compressor longevity
The large fan impeller and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
A sturdy metal belt guard ensures optimum protection of the components and a high level of user safety
Compressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakage
High quality drive belt
Powerful and economical drive
The toothed drive belt facilitates start-up, improves running smoothness and power transmission and reduces power consumption by up to 30%.
Sturdy metal belt guard
Comfort safety coupling - The advantages.
Comfort safety couplings from AIRCRAFT as the first manufacturer to be used in series production
Two separate locking systems for maximum working safety
Dangerous whipping of the hose line is prevented
Comfortable and safe to transport and set up
Ergonomically extended handle for comfortable transport in an almost upright position - strain on the back due to lifting is avoided
Puncture-proof PU foam wheels and stable steering chassis with parking brake allow easy transport
The parking brake prevents both turning and rolling movement of the wheels and ensures optimal standing of the compressor
Practical second transport handle on the boiler, which facilitates carrying the compressor
High quality boiler with durable rust protection
AIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized tanks inside and outside as standard
AIRPROFI series boilers therefore come with a 15-year warranty against rust-through.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
