Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Energy-efficient IE4 motor
Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
A-PLUS 55-10 on suure jõudlusega tööstuslik kruvikompressor, mis on mõeldud pidevaks kasutamiseks tootmises, töökodades ja suruõhusüsteemides. Helisummutatud korpus, vastupidavad CNC-töödeldud komponendid ning NRG mikroprotsessorjuhtimine tagavad kõrge töökindluse, lihtsa hoolduse ja stabiilse suruõhuvarustuse.
A-PLUS 11-13 on professionaalne kruvikompressor pidevaks kasutamiseks tööstuses ja töökodades. Seade on loodud 100% koormusega tööks ning tagab kõrge töökindluse, madala mürataseme ja pika kasutusea. EasyTRONIC MICRO II elektrooniline juhtimine koos rõhuanduriga aitab vältida mootori ülekoormust ning vähendab hoolduskulusid.
M ACDB 100/10 H MK on 100-liitrine horisontaalne suruõhumahuti konsooliga. Maksimaalne töörõhk 10 bar, kuumtsingitud sise- ja välispind ning AD 2000 standardile vastav konstruktsioon tagavad pika kasutusea ja töökindluse.
Tehnilised andmed:
Mahuti maht: 100 l
Maksimaalne töörõhk: 10 bar
Tüüp: horisontaalne
Pikkus: 1098 mm
Laius/sügavus: 330 mm
Kõrgus: 448,5 mm
Kaal: 35,9 kg
Kuumtsingitud sise- ja välispind
Vastab EÜ direktiivile 87/404/EMÜ või surveseadmete direktiivile DGRL 97/23/EÜ
AD 2000 moodul H / H1 sertifitseering
Töötingimused vastavalt AD 2000 S1 (10/2000) nõuetele
Korrosioonigarantii: 15 aastat läbiroostetamise vastu
Sintered filter with centrifugal principle, diaphragm pressure regulator with secondary venting and normal mist lubricator with post-suction device under pressure
For compressed air and neutral gases
Filter pressure regulator with semi-automatic condesate drain
Secured via lockable handwheel
For vertical installation
Sintered filter with centrifugal principle, diaphragm pressure regulator with secondary venting and normal mist lubricator with suction device under pressure
For compressed air and neutral gases
Filter pressure regulator with semi-automatic condesate drain
Safety via lockable handwheel
Fog lubricator for oil type CL 32 according to DIN 51517-ISO VG 32 - oil refill under pressure up to max. 10 bar possible
Input pressure 1, 5 - 16 bar
Suitable for temperatures from -10 to +50°C
For vertical installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
Sturdy metal belt guard
"Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
Ten-year warranty against rust-through on powder-coated compressed air reservoir
Including high-quality composite safety coupling and high-quality CONDOR pressure switch
Two-cylinder high-performance units made of gray cast iron for a long service life.
Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
Quality electric motor with high starting torque
Electric motor equipped with motor protection switch
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Sturdy metal belt guard
Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
Container pressure gauge "Made in Germany
Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
Ten-year warranty against rust-through on powder-coated compressed air reservoir
Includes high quality composite safety coupling and high quality CONDOR pressure switch
Large ergonomic handle
Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
Made in Europe
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Flow-optimized air supply for up to 75% less resistance
Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
absolute compressed air quality according to ISO 8573-1
For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
Pure compressed air in connection with upstream ultrafine filter
Flow-optimized air supply for up to 75% less resistance
Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
absolute compressed air quality according to ISO 8573-1
For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
Pure compressed air in connection with upstream ultrafine filter
