Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
For separating solid contaminants up to 1μm.
Operating temperature 1.5 to 65 ° C, absolute compressed air quality according to ISO 8573-1.
for safe separation of condensate and particles
Complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Suitable for installation even in noise-sensitive areas and the direct working environment
Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
High-quality Condor pressure switch
Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
Quality electric motor with motor protection switch and start-up relief
Integrated phase monitoring
Facility for easy tensioning of the V-belt
Service-friendly design
Ready for connection with all fittings and safety devices
Models with compressed air tank: Galvanised air reservoir inside and out with 15-year warranty against rusting through
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
When producing and conditioning compressed air, condensate inevitably accumulates, oily and frequently polluted with dirt particles. Since condensate accumulates irregularly depending on the year and time of day or load of the compressor, the BEKOMAT® with its capacitive sensor often pays for itself over time-controlled drain valves within half a year. Features and Benefits:
Usable and resistant to oily and oil-free, aggressive condensates
Easy connection to filter or boiler by adapting the inlet nozzle with horizontal or vertical condensate inlet
With discharge with BEKOMAT® improved function with oil / water separators
BEKOMAT® 32 with alarm function and switchable fault message
function Description
Condensate collects in the collection container of the arrester.
A capacitive sensor detects the level of the condensate. At maximum level, a diaphragm opens, through which the condensate is discharged through the system pressure.
The membrane is closed before compressed air can escape
The advantages at a glance
No unnecessary compressed air losses
Derivation according to the amount of seizure
Sensor detects every type of condensate
Insensitive to dirt
simple electrical installation (230 V)
Low maintenance
Including service unit
Economical: Complete replacement of all wearing parts and pressure-bearing parts with just one handle.
no electrical installation required during maintenance
no assembly of seals and individual parts
Only one spare part, factory pressure and function tested
The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
This ensures a longer life due to less wear
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
High quality electric motor with high torque
Electric motor equipped with motor protection switch
With high-quality CONDOR pressure switch
Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
Ten-year rust-through warranty on powder-coated compressed air tank
With all safety devices
Fully wired
Stable belt guard made of metal
Including swinging elements
Connection to grid by qualified electrician
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Rotation direction control for the motor, prevents damage during start-up or after a change of location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Easy to service: simple removal and installation of all components requiring maintenance
Latest generation IE4 permanent magnet motor for max. energy efficiency
Larger speed/load range
Larger delivery volume supply range
Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
Very quiet operation - only 64 dB
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Advanced and efficient cutting-edge technology in the smallest possible space
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Two-stage compression 2-cylinder high-performance cast iron unit with very low speed
Particularly quiet and low-vibration running is achieved
Longer service life due to less wear
Powered by Honda GX390 engine with low oil and fuel consumption and low noise and vibration levels
High air delivery rate of 900 liters per minute
With generator for three-phase (7 kVA) and single-phase (3.5 kVA) power supply
With electric and manual start
The two-stage compression 2-cylinder high-performance cast iron unit achieves a very low speed, resulting in particularly quiet and low-vibration operation. This ensures a longer service life due to less wear
Belt drive by Honda GX390 engine with low oil and fuel consumption as well as low noise and vibration levels
Energy efficiency: The Honda GX390 engine is known for its low oil and fuel consumption, which reduces operating costs
With a high air delivery rate of 900 liters per minute, this compressor is ideal for demanding applications
Versatility: Equipped with a generator for both three-phase (7 kVA) and single-phase (3.5 kVA) power supply
Easy maintenance: thanks to the integrated filter and lubrication equipment, the compressor remains clean and efficient
Simple operation thanks to electric and manual start
Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain cock
Sturdy metal belt guard
Socket design: CEE socket 230V / 16A and CEE socket 400V / 16 A
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
