Cutting wheel, alumina for metal/INOX 115 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T101 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Kompaktne ja mugav 180 W delta-lihvija, mis sobib puidu, metalli, plastiku ning värvitud pindade lihvimiseks. Delta-kujuline lihvtald võimaldab tõhusalt töödelda nurki, servi ja teisi raskesti ligipääsetavaid kohti. Seade on varustatud tolmueemaldussüsteemiga ning libisemiskindla käepidemega, mis parandab kasutusmugavust ja töö kvaliteeti. Takjakinnitusega lihvpaberi süsteem võimaldab kiiret ja mugavat lihvpaberi vahetamist.
Võimas 450 W ekstsentriklihvija, mis sobib erinevate pindade lihvimiseks ja viimistlemiseks. Seadmega on kaasas kaks lihvtalda läbimõõduga 125 mm ja 150 mm, mis võimaldavad valida töö jaoks sobiva suuruse. Sisseehitatud tolmuärastussüsteem aitab hoida töökoha puhtamana ning parandab kasutusmugavust.
Lihvijal on sujuvalt reguleeritav kiirus vahemikus 7000–13000 p/min, libisemiskindel käepide ning käivituslüliti lukustusfunktsioon pikemaajaliseks tööks. Tänu väikesele kaalule sobib seade ka ühe käega kasutamiseks.
Tehnilised andmed:
Tüüp: ekstsentriklihvija
Võimsus: 450 W
Toitepinge: 230 V
Lihvtalla läbimõõt: 125 mm / 150 mm
Pöörlemiskiirus: 7000–13000 p/min
Võnkeamplituud: 1 mm
Kiiruse reguleerimine: 5 astet + maksimaalne kiirus
Toitekaabli pikkus: 3 m
Kaal: 1,21 kg
Omadused:
Kaks vahetatavat lihvtalda (125 mm ja 150 mm).
Sisseehitatud tolmuärastussüsteem.
Reguleeritav pöörlemiskiirus täpseks tööks.
Libisemiskindel ergonoomiline käepide.
Lüliti lukustus pidevaks tööks.
Võimaldab töötada ühe käega tänu kompaktsele konstruktsioonile.
Metal cutting disc 230 x 1,9 x 22,2 mm, 41 A46-S-BF 5 pieces, film 55H579 by GRAPHITE consists of 5 pieces of metal cutting disc 230 x 1,9 x 22,2 mm. The product is designed for cutting metal. Thanks to its advanced design and thickness reduction, it allows you to significantly reduce working time. Ensures a high level of safety thanks to compliance with the EN12313 standard. The GRAPHITE brand blade is recommended for professionals and DIY enthusiasts.
The 240 W oscillating sander, 110 x 100 mm foot 59G322 by GRAPHITE is a 240 W tool with a 110 x 100 mm foot. It reaches a no-load speed of 13000 min-¹ and has an amplitude of oscillation of 0,8 mm. The sander comes with 3 feet (square, rectangular and triangular), sanding papers (9 pieces) and a dust container with filter. The weight of the machine is 1.2 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the possibility of quickly changing the sanding paper. It has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Cutting disc GRAPHITE (no ref. 55H697) outside diameter 115 mm outside diameteand internal 22.2 mm. The edges of the disc are covered with tungsten carbide, thanks to which it is very good at cutting soft materials, including: wood, wooden boards, chipboards, bricks, plastic, plasterboard.Dedicated to work with angle grinders.
850 W lööktrell on võimas ja mitmekülgne tööriist, mis sobib nii kodukasutajale kui ka professionaalile. Tänu suure jõudlusega mootorile ja löökpuurimise funktsioonile saab tööriista kasutada puidu, metalli, plasti ning müüritise töötlemiseks. Tugev konstruktsioon ja usaldusväärne mehhanism tagavad pika kasutusea ka intensiivse töö korral.
13 mm võtmega padrun hoiab puuriotsikud kindlalt paigal ning võimaldab kasutada erinevaid tarvikuid. Elektrooniliselt reguleeritav pöörlemiskiirus kuni 3000 p/min võimaldab valida tööks sobiva kiiruse ja saavutada täpseid tulemusi erinevate materjalide puhul. Komplekti kuuluv vastupidav kohver teeb tööriista hoiustamise ja transportimise lihtsaks ning mugavaks.
Tehnilised andmed:
Võimsus: 850 W
Padrun: võtmega, 13 mm
Pöörlemiskiirus: 0–3000 p/min
Funktsioonid: puurimine ja löökpuurimine
Komplektis: transpordikohver
Peamised eelised:
Võimas 850 W mootor nõudlikumate tööde jaoks
Löökpuurimise funktsioon müüritise ja tellise puurimiseks
Vastupidav 13 mm võtmega padrun
Sujuvalt reguleeritav pöörlemiskiirus
Mugav hoiustada ja transportida tänu kaasasolevale kohvrile
Cutting disc, alumina for metal/INOX 125 x 1.0 x 22.2 mm, 41 A60-T-BF, 110 pieces, carton 57T126 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). The dimensions of the tool are 125 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard and is offered in a packaging of 110 pieces.
Cutting wheel, alumina for metal/INOX 115 x 1.0 x 22.2 mm, 41 A60-T-BF, 57T100 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Demolition hammer, 30 mm hex chuck, 1700 W, case 58G868 by GRAPHITE is a 30 mm hex chuck tool with 1700 W power for demolition and renovation work. Offered in a sturdy carrying case together with accessories - 1x chisel, dust cover, grease reservoir. The hammer has an impact energy of 45 J and a chisel strike rate of 1500 per minute. It has a 4m power cable and has a total weight of 14kg. It is a robust tool with a housing that is resistant to mechanical damage and high temperatures. The demolition hammer with handle from the GRAPHITE brand is recommended for professionals.
Cutting disc for metal GRAPHITE (ref. no. 55H574) with diameters 115 mm allows to advanced design and greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work.
Metal cutting disc 115 x 1,0 x 22,2 mm, 41 A60-T-BF 10 pieces, film 55H577 by GRAPHITE consists of 10 pieces of metal cutting discs with parameters 115 x 1 x 22,2 mm. The product is designed for cutting metal. Thanks to its advanced design and thickness reduction, it allows you to significantly reduce working time. Ensures a high level of safety thanks to compliance with the EN12313 standard. GRAPHITE brand discs are recommended for professionals and DIY enthusiasts.
18V GRAPHITE Energy+ cordless inflator compatible with 18V Li-Ion Energy+ batteries. It is adapted to inflatable elements with a screw valve; to inflatable elements with a valve to pump out the air. The design of the power tool is characterized by high ergonomics. The handle is covered with non-slip material, so that the compressor lies securely in the hand. The set includes 3 different nozzles.
The 380 W orbital sander, 115 x 230 mm foot 59G329 by GRAPHITE is a 380 W tool with a 115 x 230 mm foot. It reaches speeds of 7,000 to 13,000 min-¹. Sandpaper and a dust container are offered with the sander. The weight of the machine is 2.1 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the ability to quickly change the sanding paper. It features a locking function for continuous operation. The sander has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Handy 450 ml thermos made of stainless steel. It has a wide, ergonomic mouthpiece, making it easy to drink directly from the container. In addition, the thermos is equipped with a lock against accidental opening, protecting its contents during transport. The design of the thermos makes it easy to use with one hand.
Professionaalne 800 W kipsilihvija, mis on mõeldud kips-, pahtel- ja krohvipindade lihvimiseks. Seade on varustatud LED-valgustusega, mis tagab parema nähtavuse tööpiirkonnas ning võimaldab saavutada täpsema ja ühtlasema tulemuse.
Lihvijal on teleskoopkäepide, reguleeritav pöörlemiskiirus ning tõhus tolmuärastussüsteem, mille saab ühendada tolmuimejaga. Takjakinnitusega lihvpaberi vahetamine on kiire ja lihtne ning tööketas on kaitstud harjaga tolmu paremaks kogumiseks.
GRAPHITE cordless impact driver, compatible with 18V Li-Ion GRAPHITE Energy+ batteries. The device is designed for screwing and removing screws and bolts in wood, metal and plastics. It allows you to work at high speeds (up to 2200 rpm) and provides high torque (180 Nm). The torque is generated in the form of an instantaneous peripheral impact, which helps to minimize the impact of the device on the operator's hand during screwing. The tool holder 6.35 mm (1/4”) is designed to work with the most popular type of screwdriver bits. The device is equipped with an electric motor brake that allows quick stopping of the spindle and LED illuminating the work place. Ergonomic shape of the handle and an optimized total length of the driver allow for effective work in all conditions.
Cutting disc, alumina for concrete 115 x 2 x 22.2 mm, 41 C46-R-BF, 57T115 by GRAPHITE is a tool designated type 41 C46-R-BF. The flat disc features a diameter of 115 mm, a thickness of 2 mm and a mounting hole diameter of 22.2 mm. It has been adapted to operate at a maximum speed of 13,300 rpm and an operating speed of 80 m/s. The product complies with EN 12413 and, being designed for cutting concrete, will work well in any do-it-yourself workshop.
The 260 W orbital sander, 90 x 187 mm foot 59G326 by GRAPHITE is a 260 W tool with a 90 x 187 mm foot. It reaches speeds of 7,000 to 13,000 min-¹. 2x sanding papers and a dust container are offered with the sander. The weight of the machine is 1.7 kg. This sander model is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the ability to quickly change the sanding paper. It features a locking function for continuous operation. The sander has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
