The connection hose for 59G614, 59G614-147 by GRAPHITE is a hose dedicated to the industrial hoover number 59G614, characterised by a length of 150 cm and a diameter of 32 mm. A high quality accessory from the GRAPHITE brand.
Impact bit extension 150mm 56H558 by GRAPHITE with an overall length of 150mm. It has been manufactured from durable CrV steel. It features a ¼" drive and has a practical magnetic tip for easy installation of bits. The bit is compatible with impact tools. GRAPHITE brand item recommended for professionals and DIY enthusiasts.
Quick release nut for M14 angle grinder, 56H421 by GRAPHITE with a height of 13 and width of 46 mm. Adaptable for M14 threads. Allows quick mounting and removal of the disc without the use of a spanner. Can be used on all angle grinders with a suitable spindle. The nut has built-in holes for a standard grinder key in case it gets jammed. The chuck holds the disc very well and the diameter range for the disc is 115 - 230 mm. The GRAPHITE brand component is characterised by its knurled sides. It is recommended for professionals and DIY enthusiasts.
GRAPHITE löökkruvikeeraja otsikute komplekt TX25 on mõeldud professionaalseks ja intensiivseks kasutamiseks töödel, kus rakendatakse suuri pöördemomente. 25 mm pikkus sobib täpseks ja kontrollitud kruvimiseks ning 20‑osaline komplekt on praktiline valik töökojale ja igapäevaseks kasutuseks. Otsikud sobivad kasutamiseks nii akutrellide kui ka löökkruvikeerajatega.
Otsikud on valmistatud vastupidavast S2 terasest, mis tagab suure elastsuse ja kõrge vastupidavuse mehaanilistele kahjustustele. Torsioonitsoon vähendab löökkoormuse ja pöördemomendi otsest ülekandumist otsikule, aidates vältida purunemist ning pikendades otsikute kasutusiga. Täpne TX25 (Torx) profiil tagab kindla haardumise kruviga ja vähendab libisemise ohtu töö käigus.
Otsikud on pakendatud praktilisse plastikust hoiukarpi, mis võimaldab mugavat hoiustamist ja transporti.
GRAPHITE kruvikeeraja otsik PH1 (ristpea / Phillips) on mõeldud ristpeaga kruvide ja poltide kinnitamiseks ning lahtikeeramiseks. Seda tüüpi kinnitusi kasutatakse laialdaselt puidu-, mööbli- ja üldehitustöödel, kus on oluline kindel ja täpne haare. 150 mm pikkus võimaldab mugavat tööd ka sügavamates või raskemini ligipääsetavates kohtades.
Otsik on valmistatud kvaliteetsest S2 legeerterasest, mis tagab kõrge vastupidavuse kulumisele ja deformatsioonile ning sobib intensiivseks ja pikaajaliseks kasutamiseks. Universaalne 1/4" kuuskantkinnitus muudab otsiku ühilduvaks enamiku akutrellide, lööktrellide ja otsikuhoidjatega.
Tehnilised andmed:
Tüüp: Phillips PH1
Otsa suurus: 6,35 mm
Pikkus: 150 mm
Kinnitus: 1/4" kuuskant
Materjal: S2 legeerteras
Kasutusala: puidu- ja mööblitööd, üldised kruvitööd
GRAPHITE's 58GE135, 58GE135-30 knife set, 82mm in length, is dedicated to GRAPHITE's Energy+ 18V 58GE135 cordless planer. The parts are made from high quality HSS steel. They are characterised by their high quality and enable efficient replacement. GRAPHITE brand is recommended for professionals and DIY enthusiasts.
Mixer working part with a diameter of 120 mm dedicated to stem ref 56H700. A pull-up mixer designed for thin solutions, e.g. paints, gypsum plaster, structural paints. The solution is forced downwards so that it does not spill or dirty the surroundings.
Floor nozzle (for 59G613, 59G614) 59G613-149C by GRAPHITE is a nozzle designed for industrial hoovers with part numbers 59G613 and 59G614. It is characterised by a diameter of 32mm. Designed to remove debris from large areas and various types of flooring.
GRAPHITE löökkruvikeeraja otsikute komplekt TX40 on mõeldud professionaalseks ja intensiivseks kasutamiseks töödel, kus rakendatakse suuri pöördemomente. 25 mm pikkus sobib täpseks ja kontrollitud kruvimiseks ning 20‑osaline komplekt on praktiline lahendus töökojale ja igapäevaseks kasutuseks. Otsikud sobivad nii akutrellide kui ka löökkruvikeerajatega.
Otsikud on valmistatud kvaliteetsest S2 terasest, mida iseloomustab suur elastsus ja vastupidavus mehaanilistele kahjustustele. Torsioonitsoon vähendab löökkoormuse ja pöördemomendi otsest ülekandumist otsikule, aidates vältida purunemist ning pikendades otsikute kasutusiga. Täpne TX40 (Torx) profiil tagab kindla haardumise kruviga ja vähendab libisemise ohtu töö käigus.
Otsikud on pakendatud praktilisse plastikust hoiukarpi, mis võimaldab mugavat hoiustamist ja transporti.
The reduction tip (for 59G613, 59G614), 59G613-150 by GRAPHITE is an accessory with diameters: 26, 32, 35 and 40 mm, designed for industrial hoovers with part numbers 59G613 and 59G614. The GRAPHITE brand reduction tip expands the usability of the above hoovers.
GRAPHITE kruvikeeraja otsikute komplekt PZ2 on mõeldud Pozidriv‑tüüpi kruvide kinnitamiseks ja lahtikeeramiseks ning sobib eriti hästi seeriatöödeks, kus on vaja kruvida suur hulk kinniteid. 25 mm pikkused otsikud on standardpikkusega ja laialdaselt kasutusel mööbli-, puidu‑ ja üldehitustöödel.
Otsikud on valmistatud kvaliteetsest S2 legeerterasest, mis tagab hea vastupidavuse kulumisele ja mehaanilistele koormustele ning sobib nii käsitööks kui ka elektriliste ja akutoitel kruvikeerajatega töötamiseks. Universaalne 1/4" kuuskantkinnitus tagab ühilduvuse enamiku tööriistade ja otsikuhoidjatega. Komplekt sisaldab 100 üksikut otsikut, mis teeb selle praktiliseks lahenduseks professionaalseks kasutuseks ja töökodadesse.
Tehnilised andmed:
Tüüp: Pozidriv PZ2
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: S2 legeerteras
Komplektis: 100 tk
Kasutusala: mööbli‑ ja puidutööd, üldehitus, seeriakruvimine
Torx bits T30 x 25 mm, 3 pieces 56T519 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T20 x 25 mm, 3 pieces 56T522 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
Bits PH1 x 50 mm, 3 pieces 56T540 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
The PZ1 x 25 mm bits, 3 pieces 56T537 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Magnetic chuck 60 mm, 1/4" Hex 56T510 by GRAPHITE is designed for use with screwdrivers and drill drivers. The magnet holding the bit in the socket makes work more convenient and efficient. The bit size is 1/4" (hexagon). The GRAPHITE brand chuck is made from tool steel. The magnet also makes it possible to attach the blades quickly and prevents them from falling out. The length of 60 mm, on the other hand, makes the handle handy and suitable for working in hard-to-reach places. The product is compatible with most screwdrivers and drills. The GRAPHITE magnetic chuck is ideal for assembly work, carpentry, renovation and anywhere else where a quick change of tool bits is required.
Bits PH3 x 50 mm, 3 pieces 56T538 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T15 x 25 mm, 3 pieces 56T523 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
PZ2 x 50 mm bits, 3 pieces 56T533 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Hex bits H5 x 25 mm, 3 pieces 56T530 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
