GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
The SDS Plus 12 x 210 mm, quarto 54H117 reinforced concrete drill bit by GRAPHITE is an accessory characterised by its 12 mm diameter and 210 mm length. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks) it is perfect for working in reinforced concrete. This extremely durable tool from the GRAPHITE brand is recommended to professionals for intensive use.
Graduated drill bit 6-37 mm 54T305 by GRAPHITE is a drill bit made of robust HSS steel, using the graduation technique. With its help you can make holes with diameters from 6 to 37 mm. It will be perfect for working with sheet metal and plastic. Recommended for both amateur use.
HSS metal drill bit, extended 6.0 mm 54T996 by GRAPHITE is a drill bit designed for working with metal. It features a diameter of 6 mm, an overall length of 139 mm and a working length of 91 mm. The tip angle of the GRAPHITE drill bit is 118 degrees. The extended tool is DIN 338 compliant and will be useful in amateur applications.
Velcro sanding disc 225 mm, K120, 5 pcs, with 6 holes for the 59G264 and 59G265, 54H030 GRAPHITE grinders with a diameter of 225 mm and gradation K120. The pack contains five discs, designed for GRAPHITE's 59G264 and 59G265 plaster grinders. The accessories have 6 practical holes, spaced at 139 mm. The Velcro discs are made from type C paper. They are characterised by a semi-open cut and grain made from electro-corundum. They will be suitable for both professional use and DIY tasks.
GRAPHITE HEX flat chisel (ref. 57H575) 115 mm wide and 400 mm long is designed for work in materials such as concrete, hollow blocks, brick and stone. Useful for construction and demolition work. Used in tile and plaster removal, cable ducting and wall demolition.
Grinding Disc 125 x 22,2 x 5 mm, L-segment 57H893 GRAPHITE is a diamond blade for hard materials, especially concrete and stone. It has a diameter of 125 mm and an L-segment, which makes it more suitable for precision applications. The disc heats up slowly thanks to heat dissipation. Maximum speed is 80 m/s. Ideal for cutting and grinding.
Velcro sanding paper 115 x 230 mm, K 100, 5 pcs, with holes 54H004 by GRAPHITE with dimensions 115 x 230 mm. It is characterised by a gradation of 100 and is designed for orbital sanders (e.g. GRAPHITE 59G239 sander). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.
Velcro sandpaper K120, triangular with holes, 5 pieces, for 59G264, 54H033 GRAPHITE sander with gradation K120. The pack contains five triangular sheet pieces, designed for GRAPHITE's 59G264 gypsum sander. The accessories have practical holes. The Velcro sanding paper is made of E material. It is characterised by a half-open coating and grain made of electro-corundum. It will be suitable both for professional use and during various DIY tasks.
Hex metal drill bit 7.5 mm, 2 pieces 54T714 by GRAPHITE is a set of 2 pieces of drill bits for working with metals. This drill bit features a 7.5mm diameter and dimensions - 109mm overall length and 69mm working length. It is DIN 338 compliant and has a tip angle of 118 degrees. GRAPHITE brand drill bits work well in amateur applications.
Velcro sanding paper 115 x 230 mm, K 240, 5 pcs, with holes 54H007 by GRAPHITE with dimensions 115 x 230 mm. It is characterised by a 240 gradation and is designed for orbital sanders (e.g. GRAPHITE 59G239 sander). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.
The paddle wood drill, 18 x 152 mm 54T504 by GRAPHITE is a paddle type drill with Hex shank, characterised by a diameter of 18 mm and a length of 152 mm. The recommended maximum speed when working with it is 1750 rpm. The GRAPHITE brand drill bit is recommended for wood and plywood. It will prove useful in a domestic carpenter's shop.
HSS metal drill bits, 1.0 mm, 3 pcs. 54T980 by GRAPHITE is a set of 3 drill bits designed for working with metal. The single piece features a diameter of 1 mm, an overall length of 34 mm and a working length of 12 mm. The tip angle of the GRAPHITE drill bits is 118 degrees. The tools are DIN 338 compliant and will be useful in amateur applications.
The 150 x 25.4 mm soft wire brush for petrol scythe 55H102 by GRAPHITE is a brush wheel for petrol scythe. It has dimensions of 150 x 25,5 mm outer diameter and inner bore. Allows thorough cleaning of paving stones and metal surfaces. It is made of durable, corrugated wires. GRAPHITE brand is a guarantee of durability for years.
Hex metal drill bit 4.2 mm, 2 pieces 54T706 by GRAPHITE is a set of 2 pieces of drill bits for working with metals. This drill bit features a diameter of 4.2 mm and dimensions - an overall length of 95 mm and a working length of 43 mm. It is DIN 338 compliant and has a tip angle of 118 degrees. GRAPHITE brand drill bits work well in amateur applications.
Diamond Grinding Wheel 125 x 22.2 x 5 mm, C-segment 57H895 GRAPHITE is a diamond blade wheel designed for hard materials, especially concrete and stone. It has a diameter of 125 mm and a C-segment, which makes it more suitable for achieving fast results. The disc heats up slowly thanks to heat dissipation. Maximum speed is 80 m/sec. Ideal for cutting and grinding.
Wire brush for petrol scythe 200 x 25.4 mm, hard, knotted wires 55H101 by GRAPHITE is a brush wheel for petrol scythe. It has dimensions of 200 x 25.5 mm outer diameter and inner bore. Allows cleaning of paving stones and metal surfaces. It is made of durable wire weave. GRAPHITE brand is a guarantee of durability for years.
Velcro sanding disc 180 mm, K120, 5 pcs, with 8 holes for the 59G263, 54H023 GRAPHITE sander with a diameter of 180 mm and gradation K120. The pack contains five discs, designed for the 59G263 GRAPHITE plaster grinder. The accessories have 8 practical holes, spaced at 110 mm. The Velcro discs are made from type C paper. They are characterised by a half-open grit and grain made from electro-corundum. They will be suitable for both professional use and DIY tasks.
The 80 mm widia hole saw with SDS+ adapter and pilot drill 55H322 by GRAPHITE characterised by a hole saw diameter of 80 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The internal diameter is 74 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.
Velcro sanding paper 115 x 230 mm, K 40, 5 pcs, with holes 54H001 by GRAPHITE with dimensions 115 x 230 mm. It is characterised by gradation 40 and is designed for orbital sanders (e.g. GRAPHITE 59G239 sander). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.
Velcro sanding mesh 180 mm, K40, 5 pcs, for the 59G263, 54H025 GRAPHITE sander with a diameter of 180 mm and gradation K40. The pack contains five pieces of grids, designed for the GRAPHITE 59G263 plaster grinder. The accessories are made from silicon carbide. They are characterised by long service life and easy replacement. They will be suitable both for professional use and during various DIY tasks.
