GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
HSS metal drill bits, 4 - 10 mm, set of 5 pieces, 54T910 by GRAPHITE are metal drill bits characterised by diameters of 4, 5, 6, 8, 10 mm. They are made of HSS high speed steel. They have a cylindrical chuck and a 118° drill sharpening angle. They are characterised by compliance with DIN 338 and are suitable for every DIY enthusiast.
Hole saws with adapter, 19-76 mm, set of 15 pieces 56T724 by GRAPHITE contains fifteen pieces. The set includes holesaws with diameters: 19 mm, 22 mm, 25 mm, 29 mm, 32 mm, 35 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 76 mm. Included - 2 adapters with a 6 mm pilot drill bit and an allen key for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.
18 V harjavaba akunurklihvija (58GE142) on võimas ja mitmekülgne tööriist lõikamis-, lihvimis- ning puhastustöödeks. Seade kuulub GRAPHITE ENERGY+ akusüsteemi ja töötab 18 V liitiumioonakudega.
Akunurklihvija on varustatud vastupidava harjavaba mootoriga, mis tagab suure jõudluse, pikema kasutusea ning väiksema hooldusvajaduse. Seadmel on kolmeastmeline kiiruse reguleerimine, mis võimaldab valida töö jaoks sobiva pöörlemiskiiruse.
Maksimaalne pöörlemiskiirus on 9200 p/min, kiiruseseaded:
0–3500 p/min
0–6500 p/min
0–9200 p/min
125 mm kettale mõeldud nurklihvija on varustatud M14 spindlikeermega, mis võimaldab kasutada laialdaselt levinud lõike- ja lihvkettaid.
Ergonoomiline korpus, lisakäepide ning lüliti lukustusfunktsioon tagavad mugava ja turvalise kasutamise ka pikemate tööde korral.
Tehnilised andmed:
Toitepinge: 18 V (ENERGY+ akusüsteem)
Mootor: harjavaba
Ketta läbimõõt: 125 mm
Pöörete arv:
0–3500 p/min
0–6500 p/min
0–9200 p/min
Maksimaalne pöörlemiskiirus: 9200 p/min
Spindlikeere: M14
Omadused ja eelised:
Harjavaba mootor suure töökindluse ja kasutusea tagamiseks
Kolmeastmeline kiiruse reguleerimine
Sobib lõikamis-, lihvimis- ja puhastustöödeks
Ergonoomiline disain mugavaks käsitsemiseks
Lisakäepide paremaks kontrolliks
Lüliti lukustusfunktsioon mugavamaks tööks
Ühilduv GRAPHITE ENERGY+ akusüsteemiga
Sobib nii professionaalseks kui ka harrastuskasutuseks
Kasutusvaldkonnad:
Metalli lõikamine
Keevisõmbluste lihvimine
Rooste eemaldamine
Pindade puhastamine ja viimistlemine
Ehitus- ja remonditööd
Komplekti kuulub:
GRAPHITE ENERGY+ harjavaba akunurklihvija 58GE142
Lisakäepide
Märkus: Aku, laadija ja lõike- või lihvketas ei kuulu komplekti ning tuleb soetada eraldi.
GRAPHITE's Wood Drill, Extended 10 x 250 mm 54T567 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 10 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Segmented diamond cutting wheel, 180 x 25.4 mm, dry 57T312 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
The 6mm 56T726 diamond hole saw by GRAPHITE has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 35mm 56T735 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Velcro sanding discs 150 mm, P36, 5 pieces, unperforated 58T170 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P36 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Yellow sanding paper in roll 2.5 m x 115 mm, P60, 58T421 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Sanding cloth 230 x 280 mm, P100, 58T346 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for pre-smoothing coatings.
GRAPHITE's 25mm diamond hole saw 56T733 has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Velcro sanding discs 150 mm, P60, 5 pieces, with 8 holes 58T282 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Saw blade, widia, 180 x 30 mm, 60 teeth 57T216 by GRAPHITE, with an external diameter of 180 mm and a mounting hole diameter of 30 mm. It has 60 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 10,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The 4 x 75 mm ground 56T300 concrete drill bit by GRAPHITE is a ground drill bit for concrete, brick and stone, fitted with a standard cylindrical chuck. It features a diameter of 4 mm, an overall length of 75 mm and a working length of 45 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Water sandpaper 230 x 280 mm, P600, 58T223 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
GRAPHITE kvaliteetsed lihvpaberid on mõeldud kasutamiseks takjakinnitusega vibrolihvijatel ja viimistluslihvijatel. Mõõtudega 98 × 140 mm lihvpaberid sobivad suurepäraselt puidu, metalli, värvitud pindade ning plastmaterjalide töötlemiseks.
P100 karedusega abrasiiv on ideaalne pindade ettevalmistamiseks enne värvimist, lakkimist või peenemat viimistluslihvimist. Takjakinnitus võimaldab lihvpaberit kiiresti ja mugavalt vahetada, tagades tõhusa tööprotsessi.
Viie tolmueemaldusavaga konstruktsioon aitab lihvimistolmu tõhusamalt eemaldada, parandades töö kvaliteeti, vähendades abrasiivi ummistumist ning pikendades selle kasutusiga.
Omadused:
Sobib vibrolihvijatele ja viimistluslihvijatele
Takjakinnitus kiireks ja mugavaks vahetamiseks
5 tolmueemaldusava efektiivseks tolmukogumiseks
Sobib puidu, metalli, plasti ja värvitud pindade lihvimiseks
Hea valik pindade ettevalmistamiseks enne viimistlemist
The Hex 8.0 mm concrete drill bit 56T404 by GRAPHITE is a hex shank HEX drill bit with a diameter of 8 mm, an overall length of 120 mm and a working length of 72 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
