Sanding discs, perforated, Velcro with holes 225 mm, P120, 5 pieces 58T274 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
GRAPHITE's delta sanding papers, Velcro 93 x 93 mm, P60, 5 pieces, with 6 holes 58T325 are papers available in a set of 5 pieces with 6 holes, for metal, wood and plastics. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
GRAPHITE kvaliteetsed lihvpaberid on mõeldud kasutamiseks takjakinnitusega vibrolihvijatel ja viimistluslihvijatel. Mõõtudega 98 × 140 mm lihvpaberid sobivad puidu, metalli, pahteldatud pindade, värvkatete ja plastmaterjalide töötlemiseks.
P180 karedusega abrasiiv sobib peeneks viimistluslihvimiseks ning pindade lõplikuks ettevalmistamiseks enne värvimist, lakkimist või muud pinnaviimistlust. Takjakinnitus võimaldab lihvpaberit kiiresti ja mugavalt vahetada, tagades tõhusa tööprotsessi. Sarnase GRAPHITE seeria lihvpaberid on mõõduga 98 × 140 mm, takjakinnitusega ning mõeldud kasutamiseks lihvijatel.
Viis tolmueemaldusava aitavad tõhusalt eemaldada lihvimistolmu, parandavad töö puhtust ning vähendavad abrasiivi ummistumist. See tagab ühtlasema lihvimistulemuse ja pikendab lihvpaberi kasutusiga.
Omadused:
Sobib vibrolihvijatele ja viimistluslihvijatele
Takjakinnitus kiireks ja mugavaks vahetamiseks
5 tolmueemaldusava efektiivseks tolmukogumiseks
Sobib puidu, metalli, plasti, pahtli ja värvitud pindade lihvimiseks
Sanding discs, perforated, Velcro with holes 225 mm, P80, 5 pieces 58T272 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Velcro sanding discs 150 mm, P150, 5 pieces, unperforated 58T176 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P150 - a fine grade - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Velcro sanding discs 150 mm, P150, 5 pieces, with 8 holes 58T280 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P360, 58T220 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 150 mm, P100, 5 pieces, with 8 holes 58T284 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Velcro sanding papers 93 x 185 mm, P180, 5 pieces, with 8 holes 58T246 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Sanding cloth 230 x 280 mm, P46, 58T343 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand abrasive canvas is recommended for coarse coating removal.
Water sandpaper 230 x 280 mm, P1200, 58T226 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Sanding discs, perforated, on Velcro with holes 225 mm, P220, 5 pieces 58T277 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Yellow sanding paper in roll 2.5 m x 115 mm, P150, 58T425 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Velcro sanding discs 125 mm, P180, 5 pieces, without holes 58T186 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P180 - fine - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick changing of GRAPHITE discs and comfortable working.
Sanding cloth 230 x 280 mm, P40, 58T342 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand abrasive canvas is recommended for coarse coating removal.
Sanding cloth 230 x 280 mm, P150, 58T348 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for smoothing coatings.
Sanding canvas in roll 2.5 m x 115 mm, P120, 58T444 by GRAPHITE is an accessory for sanding metal, wood, plastics and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Sanding papers 93 x 230 mm, P100, 5 pieces, unperforated 58T258 by GRAPHITE are P100 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures that the paper is sufficiently effective. GRAPHITE sanding papers are offered in a practical set of 5.
Velcro sanding discs 125 mm, P60, 5 pieces, with 8 holes 58T289 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P320, 58T219 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
