The HSS metal drill bit, DIN 338, 6.5 mm 54T965 by GRAPHITE is an accessory for metal, characterised by a diameter of 6.5 mm, an overall length of 101 mm and a working part length of 63 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is in compliance with DIN 338 and will be suitable for every DIY enthusiast.
HSS metal drills, DIN 340, 2 mm, 3 pieces 54T902 by GRAPHITE is a set of 3 metal drills, characterised by a diameter of 2 mm, an overall length of 85 mm and a working part length of 56 mm. The drills are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 340 and are suitable for every DIY enthusiast.
The Hex chamfer, 16 mm 54T421 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 45 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
HSS TiN metallipuuride komplekt sisaldab 19 erineva läbimõõduga puuri vahemikus 1–10 mm. Puurid on valmistatud kvaliteetsest kiireterasest (HSS) ning kaetud titaannitriidkattega (TiN), mis suurendab kulumiskindlust ja pikendab tööriista kasutusiga. Sobivad metalli, terase ja värviliste metallide puurimiseks ning on hea valik nii kodukasutajale kui ka professionaalile.
HSS metal drills, DIN 340, 1 mm, 3 pieces 54T901 by GRAPHITE is a set of 3 metal drills, characterised by a diameter of 1 mm, an overall length of 56 mm and a working part length of 33 mm. The drills are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 340 and are suitable for every DIY enthusiast.
The HSS metal drill bit, DIN 338, 7 mm 54T978 by GRAPHITE is a metal accessory characterised by a diameter of 7 mm, an overall length of 109 mm and a working part length of 69 mm. The drill bit is made from HSS high speed steel. It has a cylindrical shank and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
TiN countersink bevel drill bits, 6.3 - 20.5 mm, set of 6 pieces 54T427 by GRAPHITE is a set of drill bits suitable for machining holes in wood, plywood, metal and plastics. Useful for removing burrs after drilling and also recommended for making screw head sockets. The set of 6 drill bits by GRAPHITE is characterised by its TiN coating. Their diameters are: 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm; and the overall lengths are: 45 mm, 50 mm, 50 mm, 56 mm, 60 mm, 62 mm. These are proven tools for DIY enthusiasts.
The HSS metal drill bit, DIN 338, 7.5 mm 54T978 by GRAPHITE is an accessory for metal, characterised by a diameter of 7.5 mm, an overall length of 109 mm and a working part length of 69 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
HSS metal drill bits, 2 - 8 mm, set of 13 pieces, 54T935 by GRAPHITE are metal drill bits characterised by diameters 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm. They are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
The Hex chamfer, 10 mm 54T419 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
The Hex chamfer, 6 mm 54T417 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
The Hex chamfer, 12 mm 54T420 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
HSS metal drill bits, 4 - 10 mm, set of 5 pieces, 54T910 by GRAPHITE are metal drill bits characterised by diameters of 4, 5, 6, 8, 10 mm. They are made of HSS high speed steel. They have a cylindrical chuck and a 118° drill sharpening angle. They are characterised by compliance with DIN 338 and are suitable for every DIY enthusiast.
HSS-Co 8.0 mm metal drill bits, 5 pcs. 57-046-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use an apex angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 75 mm and their overall length is 117 mm. The maximum speeds are: INOX 450-500 rpm, general metals 900-1000 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 9.0 mm metal drill bits, 5 pcs. 57-050-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use a tip angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 81 mm and their overall length is 125 mm. The maximum speeds are: INOX 400-450 rpm, general metals 800-900 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 5.0 mm metal drill bit , 10 pcs. 57-032-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 52 mm and its overall length is 86 mm. The maximum speeds are: INOX 725-800 rpm, general metals 1450-1600 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-CNC „Pro-Tec“ metallipuur on professionaalseks kasutamiseks mõeldud sügavlihvitud puur, mis on valmistatud kvaliteetsest M2 kiirlõiketerasest (HSS). Tänu 124° tipugeomeetriale ja E-tüüpi ristterakorrektsioonile võimaldab puur täpset puurimise alustamist ilma eelneva täkestamiseta ning tagab stabiilse juhtimise ka väikeste läbimõõtude puhul. Sobib terase, malmi, värviliste metallide ja plastide töötlemiseks.
Tehnilised andmed:
Tüüp: HSS-CNC metallipuur „Pro-Tec“
Läbimõõt: 2,0 mm
Materjal: HSS M2 kiirlõiketeras
Tipunurk: 124°
Ristterakorrektsioon: E-tüüp
Standard: DIN 338
Tööosa pikkus: 24 mm
Kogupikkus: 46 mm
Vars: silindriline
Maksimaalne soovituslik pöörlemiskiirus: 2500 p/min
