Metallitööpingid

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 20 mm.
• Pidev puurimisvõimsus terases (S235JR): 16 mm.
• Maksimaalne freespea läbimõõt: 52 mm.
• Maksimaalne otsfreesi läbimõõt: 12 mm.
• Mootori võimsus: 0,95 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 90-3000 p/min.
• Kiiruste arv: 2 käiguastet, elektrooniline kiiruse reguleerimine.
• Tööriistahoidik: BT20.
• Spindli käik: 40 mm.
• Spindli väljaulatus: 170 mm.
• Laua mõõtmed: 700 × 180 mm.
• T-soonte mõõt: 12 mm.
• T-soonte arv: 3.
• T-soonte vahe: 63 mm.
• Laua kandevõime: 50 kg.
• X-telje käik: 480 mm.
• Y-telje käik: 175 mm.
• Z-telje käik: 270 mm.
• Maksimaalne kaugus spindlist lauani: 360 mm.
• Freesipea kallutus: ±60°.
• Mõõtmed (P × L × K): 745 × 650 × 950 mm.
• Kaal: 120 kg.

Komplekti kuulub:

• Kasutustööriistad.

• Powerful and low-noise drive via LENZE gear motors with brake
• Compact, heavy-duty, stress-free welded steel design
• Acute bending rail made of tool steel C50 at the clamping beam
• Continuous, replaceable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Clamping beam pressure controlled automatically via motor current absorption
• Clamping beam driven via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine’s front side (right)
• Manual granular adjustment of the bending beam with help of a scale
• Manual crowning via pressure screws in the bending beam
• Remote foot switch with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components by Schneider or Omron
• SH-models with high, segmented crowbar tools
• Stock equipment as standard with: hardened tools, control PT 1, back gauge 6-760mm with hand wheel, measuring device and stop fingers, quick clamping for top tool
• Quality Made in Europe
• Available on request: Models in DUO design featuring full-width acute bending rail and segmented crowbar tools

Tehnilised andmed:

• Maksimaalne töölaius: 2520 mm
• Maksimaalne ava ülemise ja alumise tala vahel: 90 mm
• Segmentide mõõdud: 25 / 30 / 35 / 40 / 45 / 50 / 75 / 100 / 150 / 220 / 250 / 500 / 500 mm
• Painutusvõime terasel (400 N/mm²): 3,5 mm
• Painutusvõime terasel (700 N/mm²): 2,6 mm
• Painutusvõime alumiiniumil: 4,2 mm
• Kinnitustala mootori võimsus: 1,1 kW
• Painutustala mootori võimsus: 4,0 kW
• Pikkus: 3620 mm
• Laius: 1100 mm
• Kõrgus: 1560 mm
• Kaal: 4500 kg

Komplekti sisu:

• PT 1 juhtsüsteem painutusnurga seadistamiseks
• Kõrged segmenteeritud kitsejala-tüüpi tööriistad (SH)
• Jalglüliti hädaseiskamisfunktsiooniga
• Integreeritud painutustala peenseadistus skaalaga
• Kasutusvalmis motoriseeritud painutuspink

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Fold-away protective screen
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy belt tracking adjustment via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• various roller versions available
• Roller support infinitely height adjustable
• extra wide edition
• universally applicable

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Hydraulically controlled system for both vices, the movement of the material feed and the up and down movement of the saw arm
• Precise material feed via recirculating ball screw
• Frequency converter as standard for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min
• BRP - saw blade monitoring
• Cutting sensor as standard
• The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, eliminating the need to preset them to the material cross-section to be sawn
• Pivoting cutting gap for mitre adjustment - does not cut into the saw table
• Robust band guides with adjustable carbide plates for a precise cut
• Digital angle display
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Saw blade guides with integrated cooling system

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• Measurement scale for drilling depth
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

• Smooth running thanks to ground multi-tooth driver
• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt

• 9 pieces; Sizes 14.5 / 16/18/20/22/24/26/28/30 mm
• Long service life
• Good chip removal
• right hand cutting

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

MBS 155K on professionaalne metalli lintsaag torude, profiilide ja täismaterjali täpseks lõikamiseks. Reguleeritav lõikenurk, kompaktne konstruktsioon ja töökindel saeraam muudavad selle ideaalseks lahenduseks töökotta ja tootmisse.

Tehnilised andmed:

• Toitepinge: 230 V
• Mootori võimsus: 1,1 kW
• Saelindi mõõtmed: 1735 × 13 × 0,65 mm
• Saelindi kiirus: 20 / 29 / 50 m/min
• Lõikenurk: 0° kuni +45°
• Lõikevõime 90° ümartoru: 150 mm
• Lõikevõime 90° ristkülikprofiil: 140 × 150 mm
• Lõikevõime 90° nelikantprofiil: 145 × 145 mm
• Lõikevõime 45° ümartoru: 90 mm
• Lõikevõime 45° ristkülikprofiil: 90 × 100 mm
• Lõikevõime 45° nelikantprofiil: 90 × 90 mm
• Astmevabalt reguleeritav saeraami langetuskiirus hüdrosilindriga
• Kiirkinnitusega kruustang
• Automaatne lõpuväljalülitus pärast lõike lõpetamist
• Mõõdud (P × L × K): 1000 × 730 × 1230 mm
• Netokaal: 78 kg

Komplekti sisu:

• Metallkraft MBS 155K lintsaag
• Bimetall-saelint
• Materjalikruustang
• Hüdrauliline langetussüsteem
• Alusraam
• Kasutusjuhend

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Heavy welded steel construction
• Horizontal and vertical work possibility
• All three rollers driven by hydraulic motor and planetary gear
• Rolls are hardened
• Hydraulic delivery via two lower rollers
• Lateral mechanical straightening rollers, infinitely adjustable
• Separate control panel with foot control and 2 digital displays

• Hydraulic straightening rollers
• Stepless adjustable rolling speed
• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials
• NC control

• Please specify when ordering material to be edited!

• Bending rollers on request

• Optionally, the machine can be equipped with bending rollers especially for their needs
• Also atypical sizes can be made on request

• Heavy industrial grinding machine absorbs the high self-weight
  anyway low vibrations
• Also suitable for very strong shear forces on the grinding wheels
• Maintenance-free, durable induction motor with smooth running
• Housing made of cast iron
• spark protection
• Stable, adjustable workpiece support
• Grinding wheels not included in the standard delivery

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Play only available in combination with spring-loaded stop arm SZ 05
• Ideal for miter cutting
• No tilting of the workpiece
• Pneumatic arm retraction (release) from the material stop
• Free stroke 10 mm