Metallitööpingid

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• With high-quality bi-metal band saw blade as standard
• Adjustable material stop for standard work
• Push button on the lever arm for the saw blade run switches the saw blade run on and off
• Base plate with non-slip feet
• Low-vibration and low-wear thanks to special gearbox with two hardened steel gears
• Vario drive motor with low speed and carbon brushes for up to 10 times longer service life
• Saw arm can be tilted from 0° to +60° to enable angled saw cuts

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy welded steel construction
• Horizontal and vertical working possibility
• Hydraulic feed of the upper roller
• Digital display for feed roller
• All 3 rollers driven and hardened
• Lateral straightening rollers, infinitely adjustable
• Separate control panel with foot control

Optional accessory:

• Tube bending rolls
• Angle bending rolls
• Special straightening rolls
• Profile bending rolls
• Plastic rollers for soft materials

Notice:

• Please indicate the type of material to be processed when ordering!
• NC-control Art. No. 3880163: Cannot be retrofitted, only for new machine orders!

• Optionally the machine can be equipped with bending rolls especially for your requirements.
• Also untypical sizes can be produced on request

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy industrial version
• Quiet running
• Manual or semi-automatic operation
• Steplessly adjustable saw blade speed from 0-80 m/min.
• High cutting accuracy due to vibration-free running
• Mitration adjustment up to 60° by swivelling the entire saw bow
• Serially equipped with high-quality bi-metalSaw band
• End stops adjustable down to the degree
• Swarf brush
• Microswitch for automatic limit switch
• Roller support adjustable for long and heavy workpieces
• Coolant pump
• Ball bearing mounted Saw blade guide with carbide plates for optimum cutting results
• Easy adjustment of the lowering speed by means of feed control valve in the control panel
• Large dimensioned, hydraulic quick-clamping vice, self-closing, adjustable for large cross-sections
• Completely equipped machine; The user can work productively immediately after commissioning
• EMV class C2
• 2-channel safety chain with quick stop in case of emergency

Function semi-automatic operation

• closing the vice and activating the motor
• lowering the saw bow for cutting
• stopping the motor and returning the saw bow to the starting position

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Stop track with length stop, manual measuring system with mm scale and reading magnifier
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• Maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Changing the sanding belt in seconds due to the quick-release system
• Automatic re-tensioning of the sanding belt using the spring-loaded belt tensioning system
• Easy adjustment of the belt run using the adjusting screw
• Can be used as a table model and also as a standing model with the optional base

• Powerful motors and vibration-free operation for the best sanding results
• Sanding belt can be changed in seconds thanks to the quick-clamping system
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Easy adjustment of the belt tracking via adjusting screw on the front contact roller
• Continuous sanding surface after removal of attachments enables sanding of long workpieces as well
• Can be used with and without suction
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Can be used as a table model and, with the optional base, also as a floor model

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Effective suction
• Quick and easy filter change
• Large collection container with quick access via drawer
• Compact and stable housing
• High interior capacity

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

• For supporting long and heavy workpieces
• Universally applicable for eg metal circular saws, band saws, woodworking machines, etc.
• Roller support infinitely height adjustable and clampable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Compact design with small distance between saw arm guide and vice for low-vibration operation
• Saw arm with position measuring sensor to determine the position above the workpiece and an additional lower end position sensor
• Saw blade guide with adjustable carbide plates for a precise cut
• Robust saw blade guide mounted on linear guide
• Front blade guide moves parallel to the movable vice jaw - resulting in more stable saw blade guidance
• Infinitely variable adjustment of the saw blade speed from 20 - 100 m/min.
• Hydraulically driven chip brush
• Cut sensing function with integrated button
• With frequency converter for infinitely variable adjustment of the saw blade speed
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Automatic band guide adjustment
• Hydraulic band tensioning device
• Pressure reducer Clamping vice
• Operation on modern and powerful Siemens HMI multi-touch panel
• Saw band guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Cold bending up to an angle of 180 °
• Adjustable bending angle stop for high repeat accuracy
• with the option UB 11 also for bending spirals
• with screw-on base for the workshop
• easy to transport, ideal for workshop, on assembly and in service trolley
• Removable bending unit, with optional clamping plate can also be used on a vice
• Quality Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Powerful saw blade feed
• Saw blade feed with ARP system
• Carbide program

• Saw blade feed to 150 m/min
• Saw blade feed with ARP system for automatic feed adjustment
• Carbide program for the use of carbide saw bands
• Material feed and saw frame driven by recirculating ball screws
• Material library with preset sawing parameters and characteristics
• Hydraulic belt tension
• Cutting process control
• Hydraulic saw band guides
• Coolant tank can be removed from the front
• Automatically adjustable, linearly guided saw band guides
• Double-guided saw band tensioning
• Impellers with counter bearing for a smoother cut
• Flushing of cutting channel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Smooth and powerful brushless drive
• Separate emergency stop impact switch
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Long, ergonomic aluminum die-cast quill lever
  One piece cast (B 24HV with softgrip handles)
• Depth stop
• Belt cover with safety switch
• Forward / reverse operation
• Machine light

From OPTIdrill B 28HV

• Quillons made of steel
• Coolant system
• Chip filter according to the Machinery Directive
• Easy tool change through integrated expeller

OPTIdrill B 34HV

• Quill stroke 160 mm
• Tapping function
• Digital depth gauge

Special feature of the OPTIdrill B 34 HV

• Operating mode "auto"
  • Engine starts automatically after lever movement
  • Stops again in the starting position
  • Pushbutton Start and Stop does not have to be pressed during repetitive drilling tasks
• Operating mode "tapping"
  • Engine is activated by moving the handle down
  • The direction of rotation is changed by limit switches on the adjustable drilling depth stop

Equipmentdetails
Powerful brushless drive

• Especially quiet running
• High performance
• Approximately constant torque over the entire speed range

Belt drive

• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver

Digital speed display

• integrated in the housing

Speed control

• by means of potentiometer

Concentricity

• Guaranteed ; 0.015 mm measured in the quill

Spindle

• Precision ball bearings
• High quality OPTIMUM keyless chuck as standard

V-belt tensioning device
Machine light

• Integrated in the drill head
• Halogen lamp

Drilling

• Precisely worked
• Diagonal T-slots
• 360 ° rotatable
• Circulating cooling water channel

baseplate

• Solid
• Large dimensions
• Heavily ribbed on the reverse side

cast column

• Thick-walled
• High power and stability

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Robust and stable universal grinding machines with abrasive belt and grinding wheel for a wide range of materials
• Heavy, durable industrial design with maintenance-free motor
• Housing made of extruded aluminum
• Large, heavy mounting flanges and thus high disc concentricity
• Sanding attachment with graphite coating; prevents friction and heat
• Stop allows quick and easy sanding of workpieces
• Tape adjustment without tools - only adjustable with a handle screw
• Universal corundum grinding wheel and sanding belt in the standard scope of delivery

Workpiece support

• Stable
• Adjustable

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de