Metallitööriistad

• Stable and robust construction
• Simple and easy operation
• Two cutting speeds
• Machine head, vertically guided, with dovetail guide and adjustable wedge strip, 45 ° to the left and 60 ° to the right, with locking at 45 °, 0 °, -45 °, -60 °
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear quietly running in oil bath
• Coolant pump with coolant filter
• Coolant jet distribution for better lubrication of the saw blade
• Transversely displaceable pneumatic quick-action vise with Antrigratvorrichtung
• Chipbreaker for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

• Closing the vice and activating the motor
• Lowering the saw head to cut
• Stopping the engine and returning the saw head to its original position
• Opening the vise

• Ideally suited for assembly companies, facade builders, locksmiths, repair shops, exhibition stand builders, etc.
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with low burr
• Chips dissipate the heat, thus only low heat development during cutting
• Heavy-duty motor with soft start and overload protection
• Immersion into the material possible
• Uncomplicated and fast cutting depth adjustment by means of a precise and easy to read scale
• Double-guided rip fence for precise cutting guidance
• Stable and robust construction
• Handle can be screwed in at two different positions for comfortable handling of the saw in any position
• Simple operation

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Closed construction prevents flying chips
• Connection for external suction device

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with little burr
• Closed construction prevents the flying of chips
• Integrated chip tilting compartment
• Heavy-duty motor with soft start and overload protection
• LED load indicator for maximum cutting efficiency and control
• Sturdy and robust construction
• Easy operation
• Connection for external suction device

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Closed construction prevents flying chips
• Connection for external suction device

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with little burr
• Closed construction prevents the flying of chips
• Integrated chip tilting compartment
• Heavy-duty motor with soft start and overload protection
• LED load indicator for maximum cutting efficiency and control
• Sturdy and robust construction
• Easy operation
• Connection for external suction device

MKS 315 VA on automaatne vertikaalne metalliketassaag seeriatootmiseks. Varustatud automaatse materjalisöödaga, vertikaalse saepea, jahutussüsteemi ja suure lõikevõimega täpseks metallilõikuseks.

Tehnilised andmed:

• Tüüp: automaatne vertikaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Saeketta läbimõõt: 315 mm
• Automaatne lõiketsükkel
• Automaatne materjalisööt
• Vertikaalselt juhitud saepea
• Sobib seeriatootmiseks
• Lõikenurk: kuni +60° ja -45°
• Hüdrauliliselt juhitav lõiketsükkel
• Ristisuunas liigutatav kruustang
• Jahutuspump koos jahutusvedeliku filtriga
• Õlivannis töötav reduktor
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Ülekoormuskaitse

Komplekti sisu:

• Metallketassaag Metallkraft MKS 315 VA
• Jahutusseade koos filtriga
• Materjalisöötur
• Pikkusepiirik
• Kasutustööriistad
• Materjalitugi

• Machine head guided vertically, with dovetail guide and adjustable wedge bar
• Swivelling 45° to the left and 60° to the right, with locking at -45°, 0°, -45°, 60°
• Two cutting speeds
• Adjustable depth stop for the vertical stroke of the saw head
• Cross-movable vice with anti-burr device
• Stable and robust construction
• Easy and hassle-free operation
• Reduction gearbox quietly running in the oil bath
• Coolant pump with coolant filter
• Coolant jet distribution, for better lubrication of the saw blade
• Chip crusher for leaf cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Control handle with safety switch

• Ideally suited for assembly companies, facade builders, locksmiths, repair shops, exhibition stand builders, etc.
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with low burr
• Chips dissipate the heat, thus only low heat development during cutting
• Heavy-duty motor with soft start and overload protection
• Immersion into the material possible
• Uncomplicated and fast cutting depth adjustment by means of a precise and easy to read scale
• Double-guided rip fence for precise cutting guidance
• Stable and robust construction
• Handle can be screwed in at two different positions for comfortable handling of the saw in any position
• Simple operation

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Closed construction prevents flying chips
• Connection for external suction device

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with little burr
• Closed construction prevents the flying of chips
• Integrated chip tilting compartment
• Heavy-duty motor with soft start and overload protection
• LED load indicator for maximum cutting efficiency and control
• Sturdy and robust construction
• Easy operation
• Connection for external suction device

• Swivel range of ± 45 °
• Easy-to-read angle scale enables precise work
• Seconds adjustment of the miter
• Protected vise spindle
• Massive machine base on both sides with holes for the mounting of the material stand MSR
• Long handle allows sawing without great effort with integrated push-button (on / off)
• Automatic switching on of the coolant pump when sawing
• Functional protection device, closed construction, movable
• Fast opening mechanism for optimum safety when cutting
• Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
• Massive machine base
• Protected vise spindle
• Machine base sizes:
  - CS 275 - 460 x 515 x 775 mm and
  - CS 315 - 546 x 620 x 801 mm
• The saw is delivered without circular saw blade (saw blade division freely selectable)

• Stable and robust construction
• Simple and easy operation
• Two cutting speeds
• Machine head, vertically guided, with dovetail guide and adjustable wedge strip, 45 ° to the left and 60 ° to the right, with locking at 45 °, 0 °, -45 °, -60 °
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear quietly running in oil bath
• Coolant pump with coolant filter
• Coolant jet distribution for better lubrication of the saw blade
• Transversely displaceable pneumatic quick-action vise with Antrigratvorrichtung
• Chipbreaker for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

• Closing the vice and activating the motor
• Lowering the saw head to cut
• Stopping the engine and returning the saw head to its original position
• Opening the vise

MKS 315 VH on poolautomaatne vertikaalne metalliketassaag täpseks ja efektiivseks metallitöötlemiseks. Hüdraulilise töötsükli, jahutussüsteemi ja suure lõikevõimega masin sobib seeriatootmiseks ning professionaalseks kasutuseks.

Tehnilised andmed:

• Tüüp: poolautomaatne vertikaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,3 / 1,9 kW
• Saeketta läbimõõt: 315 mm
• Lõikekiirused: 17 / 34 p/min
• Hüdrauliliselt juhitav poolautomaatne lõiketsükkel
• Lõikenurk: -45° kuni +60°
• Vertikaalselt juhitud saepea
• Reguleeritav sügavuspiirik
• Ristisuunas liigutatav kruustang kraadivastase seadmega
• Õlivannis töötav reduktor
• Jahutuspump koos jahutusvedeliku filtriga
• Jahutusvedeliku suunaja saeketta määrimiseks
• Laastumurdja saeketta puhastamiseks
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Ülekoormuskaitse

Lõikevõime:

• Ümartäismaterjal 0°: 70 mm
• Ümartoru 0°: 100 mm
• Nelikanttoru 0°: 90 × 90 mm
• Ristküliktoru 0°: 135 × 80 mm
• Ümartäismaterjal -45°: 70 mm
• Ümartoru -45°: 100 mm
• Nelikanttoru -45°: 90 × 90 mm
• Ristküliktoru -45°: 100 × 80 mm
• Ümartäismaterjal +45°: 70 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 70 × 80 mm

Komplekti sisu:

• Metallketassaag Metallkraft MKS 315 VH
• Jahutusseade koos filtriga
• Materjalitugi rullikuga
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Laastueemaldi

• Control with 49 programs with each 99 possible individual steps
• Two cutting speeds
• Machine head guided vertically, with dovetail guide and adjustable wedge strip
• Machine head can be swiveled 45° to the left and 60° to the right, with locking at 45°, 0°, -45°, -60°
• Stable and robust construction
• Simple and intuitive operation
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear, silent in oil bath running
• Coolant pump with coolant filter
• Coolant distribution for better lubrication
• Transversely movable hydraulic quick-action vice with anti-jaw device
• Chip breaker T6 for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

• Material feed
• Closing the vice and activating the motor
• Activation of the coolant pump and lowering of the saw head for cutting
• Return of the feed carriage to the specified dimension
• Return of the saw head to starting position
• Opening the vise
• Repeat cycle