METALLKRAFT

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

MKS 316 R on professionaalne manuaalne metalliketassaag kahe madala lõikekiirusega, mis sobib eriti hästi roostevaba terase töötlemiseks. Varustatud jahutussüsteemi, 45° pööratava saepea ja reguleeritava hõõrdsiduriga. 

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,32 / 1,91 kW
• Lõikekiirused: 20 / 40 p/min
• Saeketta läbimõõt: 315 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav 45° vasakule ja 45° paremale
• Kiirkinnituskruustangid pööratavad 45° vasakule ja paremale
• Antigraat-seadmega kiirkinnituskruustangid
• Pikisuunas nihutatav kruustang piki- ja pilulõigete tegemiseks
• Reguleeritav hõõrdsidur saeketta kaitsmiseks
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1475 × 1000 × 1150 mm
• Netokaal: 170 kg
• Brutokaal: 193 kg

Eriti sobiv roostevaba terase töötlemiseks tänu madalatele lõikekiirustele 

Lõikevõime:

• Ümartäismaterjal 0°: 65 mm
• Ümartoru 0°: 90 mm
• Nelikanttoru 0°: 5 × 85 mm
• Ristküliktoru 0°: 120 × 70 mm
• Ümartäismaterjal -45°: 60 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 70 × 70 mm
• Ristküliktoru -45°: 70 × 70 mm
• Ümartäismaterjal +45°: 60 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 80 × 70 mm 

Komplekti sisu:

• Metallketassaag Metallkraft MKS 316 R
• Jahutusseade koos filtrga
• Materjalitugi rullikuga
• Pikkusepiirik 500 mm
• Kasutustööriistad

• Saeketas ei kuulu komplekti
• Alusraam ei kuulu komplekti

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

• Please specify when ordering material to be edited!

BSS 1250 E käsigiljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 1250 mm, lõikevõime kuni 1,5 mm, tugev malmkonstruktsioon, reguleeritav külgpiirik ja suur töölaud täpseks ning efektiivseks tööks.

Tehnilised andmed:

• Töölaius: 1250 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 1,5 mm
• Tagapiiriku reguleerimisulatus: kuni 550 mm
• Töölaua mõõtmed: 600 × 1530 mm
• Töölaua kõrgus: 750 mm
• Mõõtmed (P × L × K): 2450 × 1000 × 1820 mm
• Netokaal: 480 kg
• Konstruktsioon: raske malmkonstruktsioon
• Juhtimine: käsitsi

Komplekti sisu:

• BSS 1250 E käsigiljotiin
• Standardne survetala
• Eemaldatav nurgapiirik töölaul
• Käsivändaga reguleeritav külgpiirik
• Integreeritud suur malmist töölaud

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

MKS 351 on professionaalne manuaalne metalliketassaag terase ja profiilmaterjalide täpseks lõikamiseks. Kahe lõikekiiruse, 45° pööratava saepea, topeltkruustangide ja jahutussüsteemiga masin sobib intensiivseks tööstuslikuks kasutuseks.

Tehnilised andmed:

• Tüüp: manuaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,8 / 2,4 kW
• Lõikekiirused: 40 / 80 p/min
• Saeketta läbimõõt: 350 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav 45° vasakule ja paremale
• Kiirkinnituskruustangid pööratavad mõlemale poole kuni 45°
• Topeltkruustang vastukruustangiga
• Kraadivastased kinnituslõuad
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Reguleeritava hõõrdsiduriga ajam saeketta kaitsmiseks
• Mõõdud (P × L × K): 1000 × 1200 × 1475 mm
• Netokaal: 240 kg

Lõikevõime:

• Ümartäismaterjal 0°: 60 mm
• Ümartoru 0°: 110 mm
• Nelikanttoru 0°: 100 × 100 mm
• Ristküliktoru 0°: 120 × 80 mm
• Ümartäismaterjal -45°: 55 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 80 × 80 mm
• Ristküliktoru -45°: 80 × 80 mm
• Ümartäismaterjal +45°: 55 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 80 × 80 mm
• Ristküliktoru +45°: 80 × 80 mm

Komplekti sisu:

• Metallketassaag Metallkraft MKS 351
• Jahutusseade koos filtriga
• Pikkusepiirik 500 mm
• Kasutustööriistad

• Feed roller conveyor without length stop and without measuring system
• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• standard design
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Heavy, robust welded construction
• Splitter-guided upper beam with adjustable flat guides
• Manual cutting gap adjustment at the front of the machine
• LED cutting line illumination and elongated holes in the top cover for an optimal view of the cutting edge and for cutting on tear-off
• Solid 90° side stop with 1000 mm length, T-slot, tilting cam and scale
• Two solid sheet support arms with T-slots and tilting cams
• Motorized, NC-controlled backgauge with 750 mm travel range
• Backgauge drive with frequency converter, motor with brake and recirculating ball screws
• High-quality, rotatable knives suitable for cutting stainless steel
• Heavy hold-down beam with gentle rubber inserts
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Force transfer to tools via foot pedal
• Carriage unit for ease of transport

• For manufacturing wheel arches, window frames, rain gutters or door edges for classic vehicles
• For stretching and compressing edge-bent sheet metal
• Clean, fast and low-noise work
• Including compression and stretching tools
• Fast and easy tool changes
• Easy to use

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Fine adjustment for parallel tape running
• 2 swiveling grinding tables, adjustable via clamping lever
• Powerful engine
• Standard with extraction nozzle on the spark arrester
• Very fast sanding belt change due to easy operation
• Conveniently fixable on workbench

Tehnilised andmed:

• Faasinurk: 15° kuni 45°.
• Faasi laius 15° juures: 1,4–5,2 mm.
• Faasi laius 30° juures: 3,3–5,8 mm.
• Faasi laius 45° juures: 0–7 mm.
• Pöörlemiskiirus: 2860 p/min.
• Mootori võimsus: 1,1 kW.
• Toitepinge: 230 V / 50 Hz.
• Helirõhutase: 80 dB(A).
• Mõõtmed (P × L × K): 500 × 545 × 450 mm.
• Netokaal: 48 kg

Varustus:

• Sujuvalt reguleeritav faasinurk koos fikseeritud asenditega 15°, 30° ja 45°.
• Käsirattaga reguleeritav lõikepea kõrgus.
• Skaalaga faasisügavuse seadistamine.
• Sobib terase, alumiiniumi, puidu ja plastiku töötlemiseks.
• Mõeldud pikaajaliseks pidevaks kasutamiseks.
• Komplektis 5 sirget lõikeplaati.
• Lõikeplaatide hoidik.

• Universally usable for heating, gas, boiling and heating Water pipes, copper pipes and composite pipes
• Hinged bender frame for convenient and efficient operation
• Tripod stand for ergonomic work

• Manual height adjustment of the work table with numerical display
• Conveyor table with profile conveyor belt for optimum hold during transportduring machining
• wet cooling for effective heat reduction for small parts or for machining with slow feed

• Particularly suitable for narrow workpieces
• Due to the open C-frame shape, occasional deburring of parts wider than 300mm is also possible
• Manual height adjustment of the work table with numerical display
• Conveyor table with profiled conveyor belt for optimum support during machining
• Wet cooling for effective heat reduction on small parts or for machining at slow feed rates
• Effective workpiece drying after the grinding process by radial fan
• Coolant cleaning in external paper belt filter