The laser rangefinder, 80 m range, IP54, 75-208 by NEO TOOLS is a device made in protection class IP54 and class II. It is characterised by a range of 0.05 to 80 m and a laser beam length of approximately 620-690 nm. The NEO TOOLS rangefinder is powered by 3 AAA NI-MH rechargeable batteries or 3 AAA alkaline batteries. Equipped with a memory for the last 50 measurements, as well as the possibility of resetting the data. With a battery indicator and error messages, it is easy to use. The rangefinder supports the following units of measurement: m, in, ft. With it you can measure distance, area, volume, single and continuous measurements, Pythagoras, addition and subtraction, maximum and minimum measurement. It also allows measurement from the beginning and end of the device. Equipped with an electronic 0-90 degree protractor, it allows the user to quickly and easily determine different spaces. The laser on this device has an automatic shut-off time of 30 seconds and the rangefinder itself has an automatic shut-off time of 3 minutes. It is handy and lightweight, its dimensions are 120 x 50 x 25 mm. It is offered with a wrist strap, carrying case, three AAA batteries and instructions. It will work well for both professional and amateur use.
Professionaalne välismikromeeter on kvaliteetne täppismõõteriist detailide, võllide ja teiste komponentide välismõõtmete ülitäpseks mõõtmiseks. Mõõtevahemik 50–75 mm ning mõõtetäpsus ±0,01 mm võimaldavad teostada usaldusväärseid mõõtmisi metallitöötluses, masinaehituses, kvaliteedikontrollis ja tootmises.
Mikromeetrit iseloomustab tugev konstruktsioon, selgelt loetav mõõteskaala ja sujuvalt töötav trummel, mis tagavad täpsed ning korratavad mõõtetulemused. Tööriist on mugav kasutada ning sobib nii professionaalidele kui ka nõudlikele harrastajatele.
Komplekti kuuluvad reguleerimisvõti nullpunkti seadistamiseks, mõõtestandard (etalon) ning praktiline plastkohver tööriista kaitsmiseks ja hoiustamiseks.
Omadused:
Mõõtevahemik 50–75 mm
Mõõtetäpsus ±0,01 mm
Sobib välismõõtmete täppismõõtmiseks
Selgelt loetav mõõteskaala
Sujuv ja täpne trumli töö
Vastupidav metallkonstruktsioon
Sobib professionaalseks kasutamiseks töökojas ja tootmises
The laser rangefinder with retractable measure 67-100 by NEO TOOLS is a device characterised by a measurement range of 0.05 to 40 m (including up to 5 metres for the retractable measure). It offers a laser beam length of 650 nm and a memory for the last 30 measurements. The NEO TOOLS laser distance meter is made in class II and supports the following measurement units: m, in, ft. With its help, it is possible to measure distance, area, volume, continuous measurement, Pythagoras, addition and subtraction, maximum and minimum measurement, measurement from the beginning and end of the device. The 5 m long and 19 mm wide steel rolling measure is equipped with a practical rolling lock. It has a two-material housing and a tape retraction damper. The device is MID certified. It is offered with a wrist strap. Due to its light weight (280 g) and compact dimensions of 85 x 55 x 78 mm. The operating temperature of the NEO TOOLS laser rangefinder is between 0 and 40 degrees Celsius. It also comes with an instruction manual and a USB type C cable. This device is a combination of a classic tape measure and a rangefinder. It is distinguished by its high functionality and ease of use.
Professionaalne välismikromeeter on täppismõõteriist suuremate detailide välismõõtmete täpseks mõõtmiseks. Mõõtevahemik 75–100 mm ja mõõtetäpsus ±0,01 mm võimaldavad teostada usaldusväärseid mõõtmisi metallitööstuses, masinaehituses, kvaliteedikontrollis ning teistes täpsust nõudvates rakendustes.
Mikromeetrit iseloomustab kvaliteetne viimistlus, hästi loetav mõõteskaala ning sujuvalt töötav trummel, mis tagab täpsed ja korratavad mõõtetulemused. Tugev konstruktsioon ning professionaalne teostus muudavad tööriista sobivaks nii tööstuslikuks kui ka töökoja kasutuseks.
Komplekti kuuluvad reguleerimisvõti nullpunkti seadistamiseks, mõõtestandard (etalon) ning praktiline plastkohver tööriista turvaliseks hoiustamiseks ja transportimiseks. Sama seeria mikromeetrite (25–50 mm ja 50–75 mm) kirjeldused kinnitavad komplekti sarnast ülesehitust ning mõõtetäpsust ±0,01 mm.
Omadused:
Mõõtevahemik 75–100 mm
Mõõtetäpsus ±0,01 mm
Sobib välismõõtmete täppismõõtmiseks
Selgelt loetav mõõteskaala
Sujuv ja täpne trumli töö
Vastupidav metallkonstruktsioon
Professionaalseks kasutamiseks töökojas ja tootmises
The laser rangefinder, 100 m range, IP54, 75-207 by NEO TOOLS is a device made in protection class IP54 and class II. It is characterised by a range of 0.05 to 100 m and a laser beam length of approximately 620-690 nm. The NEO TOOLS rangefinder is powered by 3 AAA NI-MH rechargeable batteries or 3 AAA alkaline batteries. Equipped with a memory for the last 50 measurements, as well as the possibility of resetting the data. With a battery indicator and error messages, it is easy to use. The rangefinder supports the following units of measurement: m, in, ft. With it you can measure distance, area, volume, single and continuous measurements, Pythagoras, addition and subtraction, maximum and minimum measurement. It also allows measurement from the beginning and end of the device. Equipped with an electronic 0-90 degree protractor, it allows the user to quickly and easily determine different spaces. The laser on this device has an automatic shut-off time of 30 seconds and the rangefinder itself has an automatic shut-off time of 3 minutes. It is handy and lightweight, its dimensions are 120 x 50 x 25 mm. It is offered with a wrist strap, carrying case, three AAA batteries and instructions. It will work well for both professional and amateur use.
Digital voltage tester 12-250 V 94-005 by NEO, supporting a voltage range of 12-250 V AC and a frequency of 50-500 Hz. It is characterised by an overall length of 120 mm. Designed for checking voltage values in sockets, locating faults in insulated AC cables and checking phase in AC electrical sockets. Fitted with a flat tip, it is also useful as a flathead screwdriver. The NEO brand voltage tester has a practical LCD display. It is characterised by the fact that there is no need for a battery. It is a tool that will make it easy to find a fault in an electrical installation.
Professionaalne välismikromeeter on täppismõõteriist detailide ja komponentide välismõõtmete täpseks mõõtmiseks. Mõõtevahemik 25–50 mm ning mõõtetäpsus ±0,01 mm muudavad selle sobivaks kasutamiseks metallitöötluses, masinaehituses, kvaliteedikontrollis ja teistes täpsust nõudvates töödes.
Mikromeetrit iseloomustab kvaliteetne viimistlus, selgelt loetav mõõteskaala ning sujuvalt liikuv trummel, mis tagab täpsed ja usaldusväärsed mõõtetulemused. Vastupidav konstruktsioon ning professionaalne teostus muudavad tööriista sobivaks nii tööstuslikuks kui ka töökoja kasutuseks.
Komplekti kuuluvad reguleerimisvõti nullpunkti seadistamiseks, mõõtestandard (etalon) ning tugev plastkohver tööriista hoiustamiseks ja transportimiseks.
Omadused:
Mõõtevahemik 25–50 mm
Mõõtetäpsus ±0,01 mm
Sobib välismõõtmete täppismõõtmiseks
Selgelt loetav mõõteskaala
Sujuv ja täpne trumli liikumine
Vastupidav ja kvaliteetne konstruktsioon
Sobib professionaalseks kasutamiseks tööstuses ja töökojas
The NEO laser rangefinder (ref. 75-206) with a maximum range of 100 m is a device for measuring distance, area and volume. The rangefinder's functions also allow for indirect measurement (using Pythagoras' theorem), continuous measurement, addition and subtraction, maximum and minimum measurement. Measurements can be taken from the beginning, middle and end of the device and in three units of measurement: m/in/ft. In addition, the device is equipped with an automatic spirit level that allows you to continuously read the position angle of the rangefinder. It has a memory for the last 30 measurements. The measurement accuracy is +/- 2 mm. The device has IP54 protection class and CE certificate. The rangefinder is equipped with adjustable volume. It is powered by two AA NI-MH rechargeable batteries or two AA alkaline batteries. The set includes a USB type C charging cable and a wristband.
The electrical installation tester 70-250 V AC 94-008 by NEO TOOLS is a device equipped with a contact function (range 70 - 250 V AC) and a non-contact function (70 - 600 V AC). It offers a continuity test and a battery test (9 V, 1.5 V). It has a practical LED lamp. The NEO TOOLS brand device is characterised by a length of 140 mm. It is powered by 2x LR41 batteries, available with the tester. Its supported frequency ranges from 50 - 500 Hz. The electrical installation tester has a flat screwdriver tip. It is a simple and multifunctional tool recommended for both electricians and amateurs for small repairs at home.
NEO Laser Rangefinder (ref. 75-204) with a maximum range of 60 m is a device for measuring distance, area and volume. The rangefinder's functions also allow for indirect measurement (using Pythagoras' theorem), continuous measurement, addition and subtraction, maximum and minimum measurement. Measurements can be taken from the beginning, middle and end of the device and in three units of measurement: m/in/ft. In addition, the device is equipped with an automatic spirit level that allows you to read the position angle of the rangefinder in real time. It has a memory for the last 30 measurements. The measurement accuracy is +/- 2 mm. The device has IP54 protection class and CE certificate. The rangefinder is equipped with adjustable volume. It is powered by two AA NI-MH rechargeable batteries or two AA alkaline batteries. A USB type C charging cable and wristband are included.
Detector with display NEO (ref. 75-250) is a digital 3-in-1 detector characterised by precision measurement and accuracy to +/- 10 mm. It is used to detect metal, live wires and wood. Useful for locating concealed cables, studs and wooden profiles, metal pipes and rebar. It will meet the expectations of DIY enthusiasts as well as professionals. It has a built-in audible signal. It is powered by a 9V battery, which allows for work up to 4 hours. The set includes a fabric case and a battery.
Kvaliteetne välismikromeeter on täppismõõteriist väikeste detailide välismõõtmete mõõtmiseks. Mõõtevahemik 0–25 mm ja mõõtetäpsus ±0,01 mm võimaldavad teostada väga täpseid mõõtmisi metallitöötluses, masinaehituses, kvaliteedikontrollis ja muudes tehnilistes rakendustes.
Mikromeetrit iseloomustab kvaliteetne viimistlus, hästi loetav mõõteskaala ning sujuvalt liikuv trummel, mis tagab mugava kasutamise ja täpsed mõõtetulemused. Tööriist sobib nii professionaalidele kui ka nõudlikele harrastajatele.
Komplekti kuuluvad reguleerimisvõti nullpunkti seadistamiseks ning praktiline plastkarp turvaliseks hoiustamiseks ja transportimiseks.
NEO laser distancer (ref. no. 75-203) is a high quality device for measuring distance, area and volume. Features of the distancer allow for making intermediate measurements (using Pythagorean theorem) and continuous measurements. The device is also equipped with automated level for continuous reading of the device angular position. Maximum operating range is 40 m and measurement accuracy is +/- 2 mm/10m. The product can be used in civil engineering, land surveying, technical projects or at home. The device is designed to operate in temperature range 0°C to 40°C. The range finder is equipped with modern touch screen. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.
