Muud metalli töötluspingid

• Standard with corrugated round brush (250 x 40 x 24 mm with wire Ø 0.5 mm) for steel processing
• with adjustable prism workpiece support
• large screen to protect against
• Sparks and flying chips
• S version with suction unit with separate motor and filter bag

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile foconveyor belt for optimum hold during processing
• NC control with 8" touch screen

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

Tehnilised andmed:

• Mootori võimsus: 1,2 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 1000–2400 p/min, sujuvalt reguleeritav.
• Tööriista läbimõõt max: 105 mm.
• Tööriista laius: 50–100 mm.
• Lihvimislaius max: 100 mm.
• Võlli läbimõõt: 19 mm.
• Netokaal: 4,8 kg

Komplekti kuulub:

• Plastkohver.
• Kummist õhkrull.
• Õhupump kummirulli täitmiseks.
• Jäme viimistlusfliis-rull Ø 90 × 100 mm.
• Lihvhülss K60, mõõtudega 100 × 292 mm.
• Lihvhülss K100, mõõtudega 100 × 292 mm.
• Lihvhülss K180, mõõtudega 100 × 292 mm.
• Lihvlintide veorull.
• Takjakinnitusega viimistlusfliis 40 × 60 mm.
• Takjakinnitusega lihvlint K120, mõõtudega 40 × 600 mm.
• Takjakinnitusega veolint 30 × 700 mm.
• Peen viimistlusfliis-rull 105 × 100 × 19 mm.
• 10-osaline vaherõngaste komplekt 40 × 19 × 5 mm

FSM 4080 PRO on professionaalne CNC-juhtimisega täppispinnalihvmasin tasapinna-, süvis- ja ristlihvimiseks. Tugev malmkonstruktsioon, kõrge täpsusega NSK P4 klassi spindlilaagrid ning automaatsed servoajamitega teljed võimaldavad töödelda ka raskeid detaile suure täpsuse ja stabiilsusega.

Tehnilised andmed:

• Magnetlaua mõõtmed: 800 × 400 mm
• Maksimaalne detaili kaal: 400 kg
• Maksimaalne kaugus spindli ja laua vahel: 550 mm
• X-telje käik: 860 mm
• Z-telje käik: 450 mm
• X-telje etteandekiirus: 5–25 m/min
• Spindli jooksutäpsus: 0,002 mm
• Spindli mootori võimsus: 3,75 kW
• Hüdraulikapumba võimsus: 1,5 kW
• Spindli pöörlemiskiirus: 1450 p/min
• Kiiruse reguleerimine: astmeteta (inverterjuhtimine)
• Lihvketta mõõtmed: Ø 405 × 50 × 127 mm
• Koguvõimsus: 8 kW
• Toitepinge: 400 V / 50 Hz
• Juhtsüsteem: 10" puutetundlik NC-juhtimine G1 (Y- ja Z-telg)
• Masina mõõtmed (P × L × K): 3600 × 2650 × 2560 mm
• Kaal: 3700 kg

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick clamping system enables fast sanding belt changes
• Integrated extraction system in the base with polyester filter pockets
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector
• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper
• With electric table height adjustment
• With split table that can be opened, drawer sanding unit and integrated work table lighting
• Smooth-running sanding table even under load
• Easy adjustment of the sanding belt
• Profile roller sanding pad, resulting in less tarnishing during the sanding process
• Right/left rotation as standard

• Fine adjustment for parallel tape running
• 2 swiveling grinding tables, adjustable via clamping lever
• Powerful engine
• Standard with extraction nozzle on the spark arrester
• Very fast sanding belt change due to easy operation
• Conveniently fixable on workbench

Tehnilised andmed:

• Faasinurk: 15° kuni 45°.
• Faasi laius 15° juures: 1,4–5,2 mm.
• Faasi laius 30° juures: 3,3–5,8 mm.
• Faasi laius 45° juures: 0–7 mm.
• Pöörlemiskiirus: 2860 p/min.
• Mootori võimsus: 1,1 kW.
• Toitepinge: 230 V / 50 Hz.
• Helirõhutase: 80 dB(A).
• Mõõtmed (P × L × K): 500 × 545 × 450 mm.
• Netokaal: 48 kg

Varustus:

• Sujuvalt reguleeritav faasinurk koos fikseeritud asenditega 15°, 30° ja 45°.
• Käsirattaga reguleeritav lõikepea kõrgus.
• Skaalaga faasisügavuse seadistamine.
• Sobib terase, alumiiniumi, puidu ja plastiku töötlemiseks.
• Mõeldud pikaajaliseks pidevaks kasutamiseks.
• Komplektis 5 sirget lõikeplaati.
• Lõikeplaatide hoidik.

• Manual height adjustment of the work table with numerical display
• Conveyor table with profile conveyor belt for optimum hold during transportduring machining
• wet cooling for effective heat reduction for small parts or for machining with slow feed

• Particularly suitable for narrow workpieces
• Due to the open C-frame shape, occasional deburring of parts wider than 300mm is also possible
• Manual height adjustment of the work table with numerical display
• Conveyor table with profiled conveyor belt for optimum support during machining
• Wet cooling for effective heat reduction on small parts or for machining at slow feed rates
• Effective workpiece drying after the grinding process by radial fan
• Coolant cleaning in external paper belt filter

Tehnilised andmed:

• Faasinurgad: 15°, 30° ja 45°.
• Faasi laius 15° juures: kuni 5 mm.
• Faasi laius 30° juures: kuni 6 mm.
• Faasi laius 45° juures: kuni 7 mm.
• Pöörlemiskiirus: 2000–5000 p/min, sujuvalt reguleeritav.
• Mootori võimsus: 0,75 kW (750 W).
• Toitepinge: 230 V / 50 Hz.
• Mõõtmed (P × L × K): 360 × 230 × 280 mm.
• Netokaal: 10,5 kg.
• Sobivad materjalid: teras, värvilised metallid ja plastid.

Varustus:

• Võimalik kasutada nii statsionaarselt kui ka mobiilselt.
• Kiire üleminek statsionaarselt kasutuselt mobiilsele eemaldatava aluse ja käsikruvide abil.
• Tööriistavaba faasisügavuse reguleerimine.
• Standardsed faasinurgad 15°, 30° ja 45°.
• Käsietteandega tööprotsess.
• Reguleeritavate kuulpeadega töödetaili juhtplaat sujuvaks liikumiseks.
• Ülekuumenemiskaitse automaatse väljalülitusega.
• Freespea lõikeplaatidega.
• 3 kummist tugijalga.
• Töödetaili liugtugi

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Fold-away protective screen
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy belt tracking adjustment via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• Particularly space-saving due to vertical design
• With powerful motor for high sanding performance
• Virtually vibration-free operation for the best sanding results
• Can be used with and without suction
• Simple adjustment of the belt run via adjusting screw
• Automatic retensioning of the sanding belt thanks to spring-loaded
• belt tensioning system
• Protective disc can be folded away

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick-clamping system enables fast sanding belt changes
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Heavy, durable industrial design with maintenance-free motor
• Long service life and smooth running due to balanced rotor with quality ball bearings
• Li>For deburring tubes, profiles and flat workpieces made of metal
• Surface for safety glasses
• Secure and clean working with the optional GU 5 substructure with cyclone dust extraction

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding even of long workpieces
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• For precision surface grinding
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

• Handy and flexible pipe grinder for locksmiths, metalworking and railing construction
• Designed for grinding and polishing pipe constructions
• Especially suitable for sanding, satin finishing and mirror polishing of already mounted railings
• Ideal for working in confined spaces, as the handle can be turned through 180 °
• Heavy duty motor with soft start and overload protection
• With constant electronics for consistent belt speed even under load
• With stepless adjustment of the belt speed for an optimal adaptation to the different applications
• Speed ​​can be adjusted comfortably via the thumb wheel on the handle
• Simple, tool-free grinding belt change
• 360 ° circumferential grinding takes only two working steps
• High-quality 270 ° light metal arm with 2 pulleys
• Handle can be screwed in at three different positions for optimal handling

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• Quick clamping system enables fast sanding belt changes
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen