NEO on kvaliteetsete käsitööriistade bränd, mis on loodud vastama nii professionaalide kui ka nõudlike kodukasutajate vajadustele. NEO tööriistad on tuntud oma vastupidavuse, ergonoomilise disaini ja täpsuse poolest, muutes need ideaalseks valikuks igasugusteks töödeks. Lai tootevalik hõlmab tööriistu alates kruvikeerajatest ja tangidest kuni mutrivõtmete, generaatorite ja töökaitsevahenditeni välja.
NEO's 19 x 3 mm 19 x 3 mm 14-032 head needle hammer for rust and welds is a tool that reaches 5000 strokes per minute. Equipped with 19 needles with a diameter of 3 mm, it offers comfortable cutting and efficient work in metal. The working pressure of the hammer is 6.3 bar and the average air consumption is 85 l/min. The tool has a 1/4" connector. Its weight is 2.8 kg. It will prove itself for demanding tasks. The quality is confirmed by the CE certificate.
NEO pneumatic stapler is designed for all upholstery and carpentry tasks. This sturdy tool is designed to drive 80 type staples of various lengths. The set includes protective glasses, nail clip, staple clip, oil and hex key. All come in convenient case. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.
NEO Tools 84-225-6 PRO Moto Expert on professionaalne tööriistakäru, mis on loodud kõige nõudlikumatele kasutajatele. Käru sisaldab koguni 358 kvaliteetset tööriista ning 12 erineva suurusega sahtlit, mis võimaldavad tööriistu süsteemselt ja ülevaatlikult hoiustada. EVA-vahust tööriistamoodulid tagavad, et igal tööriistal on oma kindel koht ning töövahendid püsivad korrastatult ka intensiivses kasutuses.
Tugev SPCC teraskonstruktsioon ja kuni 600 kg kandevõime muudavad selle tööriistakapi sobivaks professionaalsetesse autotöökodadesse, hoolduskeskustesse ja tööstuskeskkondadesse. Täielikult avatavad sahtlid koos lukustusmehhanismiga tagavad mugava ligipääsu tööriistadele ning turvalise kasutamise. Alumiiniumist tööpind sisaldab praktilisi hoiukohti kruvikeerajatele ja väiketarvikutele, aidates hoida tööala korrastatuna.
Perforeeritud külgpaneel võimaldab lisatarvikute ja konksude paigaldamist, suurendades veelgi hoiustamisvõimalusi. Tänu suurele tööriistakomplektile sisaldab kapp praktiliselt kõiki peamisi töövahendeid, mida on vaja mehaanilisteks remondi-, hooldus- ja paigaldustöödeks. NEO Tools PRO Moto Expert seeria on loodud professionaalidele, kes hindavad töökindlust, vastupidavust ja maksimaalset funktsionaalsust.
Flap wheel 125 x 22.2 mm, P60, zirconia 57-842 by NEO TOOLS is a 125 mm diameter, P60 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
NEO hanger 85 mm, 5 pcs (ref. no. 84-097) is made of steel and is a part of the NEO system. The hanger makes it easier to hang tools away during work, helps to maintain order and provides quick access to the tools. Use various parts of the NEO system to compose your own perfect place for storage of tools.NEO brand meets expectations of professionals.
NEO 1/2" Pneumatic ratchet angle spanner (ref. no 14-012). Professional pneumatic ratchet angle spanner is used in workshop tasks. Maximum torque 88 Nm. Adjustable left/right rotation. Useful for undoing bolts in hardly accessible places. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.
NEO E+ robotniiduk on nutikas ja mugav lahendus muru automaatseks hooldamiseks. Seade niidab murupinda iseseisvalt, aidates hoida muru ühtlaselt hooldatud minimaalse ajakuluga. Robotniiduk sobib suurepäraselt koduaedadesse, pakkudes vaikset, energiasäästlikku ja tõhusat tööd.
Tegemist on E+ akusüsteemiga ühilduva mudeliga, mis tarnitakse ilma aku ja laadijata, võimaldades kasutada juba olemasolevaid E+ seeria akusid ning vähendada lisakulusid. Kompaktne konstruktsioon ja automaatne töörežiim tagavad mugava kasutuskogemuse kogu niiduhooaja vältel.
Peamised eelised:
Täisautomaatne muru niitmine
Ühilduv NEO E+ akusüsteemiga
Tarnitakse ilma aku ja laadijata
Vaikne ja energiasäästlik töö
Aitab hoida muru pidevalt ühtlase ja hooldatuna
Sobib koduaedade regulaarseks muruhoolduseks
Tehnilised andmed:
Mudel: E+ robotniiduk
Toide: E+ akusüsteem
Aku komplektis: Ei
Laadija komplektis: Ei
NEO E+ robotniiduk on ideaalne valik kasutajale, kes soovib automatiseerida muruhooldust ning kasutada olemasolevaid E+ seeria akusid paindlikult ja kuluefektiivselt.
Oil pump, 18 l/min. for barrels 60 - 220 litres 11-565 by NEO TOOLS is a telescopic hand oil pump for barrels of: 60, 200 and 220 litres. It is characterised by dimensions of 800 x 90 x 90 mm. It has a PVC/NBR seal and its capacity is 18 litres per minute. The NEO TOOLS brand oil pump is designed for oil-based liquids, fuel oils, engine oil, diesel and purified paraffin. It works in field conditions in the absence of electrical power. It is recommended for do-it-yourselfers and mechanics.
NEO Tools 1/2" pneumatic impact wrench (ref. no 14-500). Sturdy, steel impact wrench. The tool features adjustable left/right rotation and non-freezing handle. Maximum torque 720 Nm. Accordance with European safety standards is confirmed with CE certificate. NEO Tools brand meets expectations of professionals.
The NEO TOOLS Mobile Oil Sinker, Gravity 10-810 is a gravity oil sinker, offering tank emptying pressures of 0.1 to 1 bar. It is characterised by a tank capacity of 70 litres and a beaker bowl capacity of 10 litres. The tool's sink bowl is made of 1.5 mm thick steel and weighs 2.5 kg. It has a diameter of 42 cm. The total weight of the beaker is 20 kg. The NEO TOOLS beaker is equipped with 4 castors, 2 of which are swivel castors. The possibility of adjusting the height of the bowl increases the potential of the product and adjusts it to different car models. The durable construction, in turn, allows for long-term use in garages and service workshops.
NEO 1/2" pneumatic impact wrench (ref. no 14-502). Sturdy, steel impact wrench that comes in set with sockets in popular sizes 9 to 27 mm, mini oiler and extension. The tool features adjustable left/right rotation and non-freezing handle. Maximum torque 314 Nm. All come in practical case. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.
NEO hanger for spanners (ref. no. 84-094) is made of steel and is a part of the NEO system. The spanner is designed to hang open ended spanners, combination spanners or ring spanners. It can hold up to eight spanners. The hanger makes it easier to hang them away, helps to maintain order and provides quick access to the spanners. NEO brand meets expectations of professionals.
NEO Tools 84-222-12 on professionaalne tööriistakäru, mis ühendab endas mahuka hoiustamisruumi ja laia tööriistavaliku. Kapp sisaldab kokku 176 tööriista, mis katavad enamiku mehaaniliste remondi- ja hooldustööde vajadustest. Seitsme sahtliga konstruktsioon aitab hoida tööriistad korrastatult ning tagab neile kiire juurdepääsu.
Tugevast terasest korpus ja kuni 280 kg kandevõime muudavad töökojakapi vastupidavaks ka intensiivses professionaalses kasutuses. Kuullaagritel liikuvad sahtlid avanevad sujuvalt ning kesklukk koos kahe võtmega kaitseb tööriistu volitamata kasutamise eest. Kummikattega tööpind pakub praktilist tööala ning aitab vältida tööriistade libisemist.
Tänu 5-tollistele lukustatavatele PVC-ratastele ja mugavale külgkäepidemele on kappi lihtne töökojas või garaažis liigutada. Komplekti kuuluvad kvaliteetsed tööriistamoodulid muudavad selle tööriistakapi suurepäraseks valikuks nii professionaalsetele mehaanikutele kui ka nõudlikele hobikasutajatele.
The 600 W hedge trimmer, 510 mm cutting width 04-627 by NEO TOOLS is a reliable tool ideal for trimming, trimming and shaping shrubs and hedges. Equipped with a 540 mm long blade and 510 mm cutting width, it enables fast and precise cutting of branches with a maximum diameter of up to 20 mm. A speed of 1,800 rpm ensures efficient working, while the aluminium pressure bar and plastic blade guard guarantee safety during use. The practical hanging hole makes storing the tool easy. NEO TOOLS hedge trimmers are ideal for anyone who needs an efficient and ergonomic garden maintenance tool.
NEO pneumatic impact hammer features compact design and allows to operate in hardly accessible places. With 1/4" air connection. Versatile tool in workshops for tinsmith tasks, on constructions, for chiselling and hammering. Included: chisels 5 pcs: flat 20mm, flat with groove 20mm, curved 22mm, triangle cut 20mm, point 2mm, 1/4" GZ connection 1 pc, oiler (empty) 1 pc, hammer attachment spring 1 pc. High quality of the product confirmed with CE certificate. NEO brand meets expectations of professionals.
The 75 mm pneumatic cutter 14-017 by NEO is a tool that has a disc with a diameter of 75 mm. It is characterised by a speed of 18,000 revolutions-1 and an average air consumption of 115 l/min. It operates at a maximum pressure of 6.3 bar. The cutter is equipped with a 1/4" connector. It is an ergonomic and lightweight tool, weighing only 0.82 kg. It is CE certified. The cutter is recommended for cutting bodywork, sheet metal and metal.
