NEO on kvaliteetsete käsitööriistade bränd, mis on loodud vastama nii professionaalide kui ka nõudlike kodukasutajate vajadustele. NEO tööriistad on tuntud oma vastupidavuse, ergonoomilise disaini ja täpsuse poolest, muutes need ideaalseks valikuks igasugusteks töödeks. Lai tootevalik hõlmab tööriistu alates kruvikeerajatest ja tangidest kuni mutrivõtmete, generaatorite ja töökaitsevahenditeni välja.
The saw blade, widia, 185 x 30 mm, 60 teeth, universal 55-546 by NEO TOOLS is equipped with 60 teeth, 2.4 mm x 1.8 mm, made of TCT carbide. The FWF tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 8,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting steel profiles, aluminium and other non-ferrous metals (such as copper), as well as plastics, wood with small nails, OSB, plywood, branches and laminates. The use of compensating notches reduces noise levels and the slots increase tool stability and cutting accuracy. The product from the NEO TOOLS brand ensures clean and precise work.
HSS-CNC „Pro-Tec“ metallipuur on professionaalseks kasutamiseks mõeldud sügavlihvitud puur, mis on valmistatud kvaliteetsest M2 kiirlõiketerasest (HSS). Tänu 124° tipugeomeetriale ja E-tüüpi ristterakorrektsioonile võimaldab puur täpset puurimise alustamist ilma eelneva täkestamiseta ning tagab stabiilse juhtimise ka väikeste läbimõõtude puhul. Sobib terase, malmi, värviliste metallide ja plastide töötlemiseks.
Tehnilised andmed:
Tüüp: HSS-CNC metallipuur „Pro-Tec“
Läbimõõt: 2,0 mm
Materjal: HSS M2 kiirlõiketeras
Tipunurk: 124°
Ristterakorrektsioon: E-tüüp
Standard: DIN 338
Tööosa pikkus: 24 mm
Kogupikkus: 46 mm
Vars: silindriline
Maksimaalne soovituslik pöörlemiskiirus: 2500 p/min
Repair tape 50 mm x 10 m EXTREME CAMO 56-086 by NEO TOOLS with dimensions of 50 mm x 10 m and thickness of 170±10 mic is designed for repairing, joining, sealing and protecting various surfaces. Made of polyethylene (PE) film reinforced with reinforcing mesh, it is characterised by high resistance to tearing, mechanical damage and abrasion. The strong hot-melt adhesive based on synthetic rubber ensures good adhesion, even on uneven surfaces. NEO TOOLS tape is waterproof, flexible and easy to apply, and thanks to the possibility of tearing it off in the hand, it does not require the use of scissors. The product works well indoors and outdoors, including for quick repairs and fixes, joining components in construction and installations, sealing pipes and ducts, and workshop and garage work. The camouflage colour EXTREME CAMO provides low visibility at the point of application
Saw blade, widia, 254 x 30 mm, 80 teeth, universal 55-548 by NEO TOOLS is equipped with 80 teeth, 2.5 mm x 2 mm, made of TCT carbide. The FWF tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 6,100 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting steel profiles, aluminium and other non-ferrous metals (such as copper), as well as plastics, wood with small nails, OSB, plywood, branches and laminates. The use of compensating notches reduces noise levels and the slots increase tool stability and cutting accuracy. The product from the NEO TOOLS brand ensures clean and precise work.
Sabre saw blade, HCS, 228 x 19 x 1.3 mm, 3 TPI, set of 2 pieces 58-043 by NEO TOOLS is a set of 2 sabre saw blades made of HCS, with 3 TPI toothing and a stroke of 8.5 mm. The tools have dimensions of 228 x 19 x 1.3 mm. They are designed for branches and wood without nails (20-175 mm) - they also work well for cutting firewood/firewood/fresh wood (20-175 mm diameter). The design of NEO TOOLS saw blades allows for both straight and coarse cutting, making quick garden work easier.
Hiking chair, folding 63-188 by NEO TOOLS, which is made of 600D polyester and fitted with a φ18 x 0.6 mm steel tube frame. The model has a maximum load capacity of 110 kg and its dimensions when folded are 66 x 52 cm and 73 x 56 x 52 cm when unfolded. The chair stands out for its very easy folding and unfolding, and thanks to the 3 springs installed in the seat, they improve the comfort of sitting and folding. With a weight of 1.8 kg, it is comfortable to carry and works well on the beach, in the garden, on the balcony, on the terrace, while fishing and camping
NEO TOOLS' 30m, 5 line, 360° horizontal plane laser with case and 1.5m 75-160 tripod by NEO TOOLS with a 30m range displays a 360° horizontal line as well as vertical and cross lines, allowing you to determine vertical lines, horizontal lines and angles across the room. The device is powered by a Li-ion 3.7 V 3600 mAh battery (USB Type C charging), offers an accuracy of +/- 1.5 mm/5 m, a wavelength of 515 nm ± 5 nm, operates in laser class 2 and has a self-levelling range of 4°. The NEO TOOLS laser is equipped with a ¼" thread for tripod mounting, and the IP54-rated housing and CE certificate increase safety and resistance to working conditions. The kit includes a plane laser, 1.5m aluminium tripod, case, rechargeable battery, handle and USB-C cable.
Disposable dust respirator FFP2, 3 pieces, CE 97-302 by NEO TOOLS is a disposable dust respirator of FFP2 class in a set of 3 pieces, which is a category III PPE. Made of polypropylene, it is designed to protect the upper respiratory tract. It is characterised by high filtration efficiency, trapping 94% of particles with a diameter of 0.3 μm or more; including dusts, fumes, aerosols, highly toxic liquids and bacteria and viruses. It uses foam on the inside of the upper part and an aluminium slat on the outside, improving the fit to the face and increasing comfort. The NEO TOOLS half-mask fits well to the face, providing effective protection.
Dust respirator, FFP3, with valve, 3 pieces, CE, 97-322 by NEO TOOLS is a set of 3 protective half-masks, classified as protection category III, made of polypropylene. It is a model of filtration efficiency class FFP3 with an exhalation valve, providing excellent protection of the upper respiratory tract and high filtration efficiency of harmful particles of dust, fumes, aerosol, highly toxic liquids, as well as bacteria and viruses. The filtration efficiency is 99% of particles. The upper part on the outside features an aluminium strip for a better fit and comfort, and a silicone gasket on the inside for a better seal and safety. There is an exhalation valve in the middle of the mask to facilitate exhalation of air, reduce humidity and temperature inside the mask and improve comfort during prolonged use. The NEO TOOLS half mask is characterised by a perfect fit to the face and is CE certified.
Folding respirator FFP2, with valve, 3 pieces, CE 97-304 by NEO TOOLS is a set of 3 pieces of dust respirators, classified as protection category III and made of polypropylene. The respirator offers a filtration efficiency class of FFP2 and provides excellent protection for the upper respiratory tract, effectively filtering harmful particles of dust, fumes, aerosol, highly toxic liquids, as well as bacteria and viruses. It stops 94% of particles with a diameter of 0.3 μm or larger. It uses foam on the upper side on the inside and an aluminium strip on the outside, which translates into a better fit, comfort and excellent adherence to the face. There is an exhalation valve on the side of the mask, which makes it easier to exhale air, reduces humidity and temperature inside the mask and improves comfort during prolonged use. The NEO TOOLS brand product is CE certified.
Dust respirator with 1 valve FFP2, 3 pieces, CE 97-303 by NEO TOOLS is a half-mask belonging to the individual protection category III, made of polypropylene, designed to protect the upper respiratory tract. It is characterised by high filtration efficiency, stopping up to 94% of particles with a diameter of 0.3 μm or more - including dusts, fumes, aerosols, highly toxic liquids and bacteria and viruses. It uses foam on the inside of the upper part and an aluminium strip on the outside to improve fit and comfort. There is an exhalation valve in the middle of the NEO TOOLS mask to facilitate exhalation of air, reduce humidity and temperature inside the mask and improve comfort during prolonged use. The respirator fits well to the face and the CE certificate confirms compliance with safety requirements.
Bit set, 15 pieces 56-616 by NEO TOOLS consists of bit profiles: PH, PZ, SL, TX, HEX; made of S2 steel. The set includes 14 pieces of bits with a length of 25 mm and a 1/4" HEX quick-release magnetic holder with a length of 65 mm. Bit types: PH1/2, PZ1/2, SL5/6, HEX 3/4/5, TX 10/15/20/25/30. The configuration of the set ensures compatibility with standard 1/4" HEX holders.
Velcro sanding mesh 180 mm, P180, 5 pieces for sander 59G263, 54-028 by NEO TOOLS with a diameter of 180 mm and gradation P180. The package contains five pieces of grids, designed for the 59G263 GRAPHITE plaster grinder. The accessories are made from silicon carbide. They are characterised by long service life and easy replacement. They will be suitable both for professional use and during selected DIY tasks.
Waterproof sanding paper 230 × 280 mm, P2000, 55-910 by NEO TOOLS is a waterproof paper, 230 × 280 mm and gradation P2000, which is designed for wet sanding. The sheet allows finishing dulling and removal of minor irregularities from the surface. Its applications include: metal, wood, plastics and glass. Sanding with water reduces clogging of the grain and promotes an even machining effect. Sanding paper by NEO TOOLS is a proven solution for many tasks.
The 125 x 22.2 mm, P60 flap wheel, 55-988 by NEO TOOLS is a 125 mm diameter, P60 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
The 20 m, 5 line, green, case, magnetic holder 75-144 plane laser from NEO TOOLS is a 20 m range laser that generates a 360° horizontal line as well as vertical and cross lines, allowing multiple lines and angles to be marked out. The unit is powered by a Li-ion 3.7V 2000 mAh battery (type C), offers an accuracy of +/- 2 mm/5 m, a wavelength of 510-530 nm, operates in laser class 2 and has a self-levelling range of 3°. The NEO TOOLS laser is equipped with a ¼" thread for tripod mounting, an IP54-rated housing and CE certification. The set includes a plane laser, mounting plate, two rechargeable batteries, handle, charger, USB charging cable and case.
HSS-Co 5.2 mm metal drill bit, 10 pcs. 57-034-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 52 mm and its overall length is 86 mm. The maximum speeds are: INOX 700-750 rpm, general metals 1400-1500 rpm. The purpose of this drill bit by NEO TOOLS is drilling in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 6.5 mm metal drill bit, 10 pcs. 57-040-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 63 mm and its overall length is 101 mm. The maximum speeds are: INOX 575-625 rpm, general metals 1150-1250 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 10.0 mm metal drill bits, 5 pcs. 57-054-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use a tip angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 87 mm and their overall length is 133 mm. The maximum speeds are: INOX 375-400 rpm, general metals 750-800 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
P40 karedusega lihvpaber sobib eriti hästi jämedaks lihvimiseks, värvi, laki ja muude pinnakatete eemaldamiseks ning pindade esialgseks töötlemiseks. Kuus tolmueemaldusava tagavad tõhusa tolmu ärajuhtimise ja aitavad hoida tööpinna puhtamana. Pakendis on 5 kolmnurklihvpaberit mõõduga 93 × 93 mm.
