NEO on kvaliteetsete käsitööriistade bränd, mis on loodud vastama nii professionaalide kui ka nõudlike kodukasutajate vajadustele. NEO tööriistad on tuntud oma vastupidavuse, ergonoomilise disaini ja täpsuse poolest, muutes need ideaalseks valikuks igasugusteks töödeks. Lai tootevalik hõlmab tööriistu alates kruvikeerajatest ja tangidest kuni mutrivõtmete, generaatorite ja töökaitsevahenditeni välja.
NEO TOOLS' O1 SR Neo Air professional half boots, size 45, 82-782-45 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' O1 SR Neo Air work half-boots, size 44, 82-782-44 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO spetsiaalsed sokid on valmistatud kvaliteetsest puuvillast ning sisaldavad polüestrit, elastaani ja akrüüli, tagades mugavuse ja hügieeni töö ajal. Varba- ja kannaosa on tugevdatud, et suurendada kulumiskindlust ja pikendada kasutusiga. Diskreetne must värv koos oranžide ja hallide detailidega annab sokkidele praktilise ning kaasaegse välimuse.
NEO transport belt (ref. 84-140) is a set of 2 belts with lengths of 4.5 m and 0.5 m and a width of 50 mm. It is used for securing loads and smaller objects against movement. It has a ratchet on both sides for tightening the belt and steel hooks for fastening. Nominal strength is up to 5 tonnes. The belt is CE certified. It was made according to the EN-12195-2 standard.
Velcro sanding paper 93 x 185 mm, P80, 5 pcs, with holes 55-738 by NEO TOOLS with dimensions 93 x 185 mm. It is characterised by gradation P80 and has a rectangular shape. The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and fast changes. The NEO TOOLS paper has 8 dust extraction holes - each with a diameter of 10 mm, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The NEO TOOLS set of 5 93 x 185 mm sanding papers is recommended for professionals and experienced do-it-yourselfers.
Impact bit extension 150mm 56-558 by NEO TOOLS with a total length of 150mm. It was made of durable CrV steel. It is characterised by a ¼" HEX handle and has a practical magnetic tip, which facilitates the installation of bits. The bit is compatible with impact tools, designed to operate at a maximum speed of 2,000 rpm. NEO TOOLS brand item recommended for professionals and DIY enthusiasts.
Accessories for mini grinder, set of 99 pieces 55-084 by NEO TOOLS is a set that consists of 99 carefully selected items, allowing you to get the most out of your machine. The set includes: 4 drills, 6 cutters, 2 arbors for the cutting disc and sanding stone, 1 arbor for the felt discs and 2 arbors for the sanding belt, as well as 16 sanding belts. The set includes felt discs (1 25 mm and 4 15 mm), a 25 mm material disc, 6 20 mm sanding stones in pink and 6 20 mm sanding stones in green, a 10 x 10 x 25 mm sanding block and a polishing felt on a "bullet" shaped mandrel. For cutting, 30 25 mm cutting discs and 4 35 mm cutting discs are provided, and for sanding, a 25 mm sanding disc. The NEO TOOLS brand set is completed with a mini grinder spanner, 3 collets, 4 sanding stones on an orange mandrel, 2 sanding stones on a green mandrel, 2 nylon brushes and polishing paste, allowing for a comprehensive handling of different tasks with one machine.
Pro-Tec HSS-CNC metallipuuride komplekt sisaldab 25 kvaliteetset puuri mõõtudega 1,0–13,0 mm, pakkudes laia valikut täpseks puurimiseks erinevates materjalides. Komplekt sobib suurepäraselt nii professionaalsetele kasutajatele kui ka nõudlikeks töödeks töökojas või ehitusobjektil.
Puurid on valmistatud vastupidavast M2 kiirlõiketerasest (HSS) ning sügavlihvitud, et tagada täpne puurimine, puhtad avad ja pikk kasutusiga. 124° tipugeomeetria koos E-tüüpi ristterituse korrigeeringuga parandab puuri tsentreerimist, vähendab libisemist ning tagab stabiilse juhtimise töö käigus.
Mortar Mixer 590 x 120 mm, M14 thread, 58-782-96 by NEO TOOLS is a two-part mixer designed for mixing mortar. It has a length of 590 mm, a working part diameter of 120 mm and an M14 thread, allowing it to be fitted to compatible mixers equipped with this standard type of attachment. It will be invaluable on construction sites and during finishing work.
NEO 1/2" long bihexagonal socket (ref. no. 08-070) is made of durable chromium vanadium steel in accordance with DIN 3124. Tool quality confirmed with TÜV certificate and 25 years manufacturer's warranty. NEO brand meets expectations of professionals.
NEO silicone caulking gun (ref. no. 61-004) with working length for tube 240 mm. Designed for tubes with approx. 300 ml volume. 1.7 mm thick sheet ensures long service time of the tool. Double guide allows to extrude even the most dense substances. NEO brand meets expectations of professionals.
The laser rangefinder, 80 m range, IP54, 75-208 by NEO TOOLS is a device made in protection class IP54 and class II. It is characterised by a range of 0.05 to 80 m and a laser beam length of approximately 620-690 nm. The NEO TOOLS rangefinder is powered by 3 AAA NI-MH rechargeable batteries or 3 AAA alkaline batteries. Equipped with a memory for the last 50 measurements, as well as the possibility of resetting the data. With a battery indicator and error messages, it is easy to use. The rangefinder supports the following units of measurement: m, in, ft. With it you can measure distance, area, volume, single and continuous measurements, Pythagoras, addition and subtraction, maximum and minimum measurement. It also allows measurement from the beginning and end of the device. Equipped with an electronic 0-90 degree protractor, it allows the user to quickly and easily determine different spaces. The laser on this device has an automatic shut-off time of 30 seconds and the rangefinder itself has an automatic shut-off time of 3 minutes. It is handy and lightweight, its dimensions are 120 x 50 x 25 mm. It is offered with a wrist strap, carrying case, three AAA batteries and instructions. It will work well for both professional and amateur use.
Long hexagonal socket 1/2" NEO made of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.
Gas soldering lamp for 190 g cartridges, piezo ignition, 360 degrees, for working in any position 20-070 by NEO TOOLS is a device with piezo ignition, characterised by an output of 1.7 kW. It features an average gas consumption of 123 g/h and adaptation to standard 190 g cartridges. Thanks to its ability to work in any position (360-degree system), it will prove useful for many tasks and demanding soldering projects commissioned by professionals. The maximum operating temperature of 1,300°C ensures efficiency, while the plastic housing provides the right ratio of weight to ergonomics.
NEO mootori ajastuse fikseerimiskomplekt Fiati bensiin- ja diiselmootoritele. Komplekt sisaldab põhilisi tööriistu mootori ajastuse seadistamiseks ning ajastuskomponentide lukustamiseks hooldus- ja remonditööde ajal. Tööriistad on paigutatud vastupidavasse hoiukohvrisse lihtsaks hoiustamiseks ja transportimiseks.
Long hexagonal socket 1/2" NEO made of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.
Electroplated nails for pneumatic stapler (14-570), GA18, Type 300 (F), length 25 mm, 4000 pieces 14-653 by NEO are steel nails, electroplated and therefore corrosion-resistant. They are designed for the NEO 14-570 pneumatic stapler. They are characterised by a length of 25 mm, type 300 (F), GA18. They are offered in a set of 4000 pieces. Nails recommended for all kinds of work with pneumatic staplers. They will be suitable for professional applications.
The 16.5 cm folding knife, 63-182-1 by NEO TOOLS is a set of 5 multi-purpose tools that are always good to have on hand. The folding knife model in robust 3Cr13 stainless steel is the right choice for a variety of projects. It will work equally well for home use, in the workshop or on a survival trip. The overall length of the tool is 165 mm, while the blade length is 65 mm. The NEO TOOLS folding knife has a built-in belt clip and a safety lock to prevent unexpected closure.
Professionaalne välismikromeeter on kvaliteetne täppismõõteriist detailide, võllide ja teiste komponentide välismõõtmete ülitäpseks mõõtmiseks. Mõõtevahemik 50–75 mm ning mõõtetäpsus ±0,01 mm võimaldavad teostada usaldusväärseid mõõtmisi metallitöötluses, masinaehituses, kvaliteedikontrollis ja tootmises.
Mikromeetrit iseloomustab tugev konstruktsioon, selgelt loetav mõõteskaala ja sujuvalt töötav trummel, mis tagavad täpsed ning korratavad mõõtetulemused. Tööriist on mugav kasutada ning sobib nii professionaalidele kui ka nõudlikele harrastajatele.
Komplekti kuuluvad reguleerimisvõti nullpunkti seadistamiseks, mõõtestandard (etalon) ning praktiline plastkohver tööriista kaitsmiseks ja hoiustamiseks.
Omadused:
Mõõtevahemik 50–75 mm
Mõõtetäpsus ±0,01 mm
Sobib välismõõtmete täppismõõtmiseks
Selgelt loetav mõõteskaala
Sujuv ja täpne trumli töö
Vastupidav metallkonstruktsioon
Sobib professionaalseks kasutamiseks töökojas ja tootmises
Long hexagonal socket 1/2" NEO made of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.
