Otsing

Sisseloginud kliendile kuni -10%

Näita hindu KM-ga
ET
Kõik kategooriad
    Menüü Sulge

    Sisseloginud kliendile kuni -10%

    NEO

    NEO on kvaliteetsete käsitööriistade bränd, mis on loodud vastama nii professionaalide kui ka nõudlike kodukasutajate vajadustele. NEO tööriistad on tuntud oma vastupidavuse, ergonoomilise disaini ja täpsuse poolest, muutes need ideaalseks valikuks igasugusteks töödeks. Lai tootevalik hõlmab tööriistu alates kruvikeerajatest ja tangidest kuni mutrivõtmete, generaatorite ja töökaitsevahenditeni välja. 

    Vaata kui Tabel Nimekiri
    Sorteerimine
    Kuva leheküljel
    Electric convector heater 2000W, IP24
    03-90092
    The 2000W electric convector heater is distinguished by its modern and elegant design. It is made of tempered glass with high strength. The new generation aluminium heating system, works without noise, odour, gas or smoke. The heat is felt immediately when the convector is switched on. The LED touch screen is simple and intuitive to operate. The unit is equipped with a thermostat with temperature control from 5-45°C. The remote control makes it easy to programme the operating mode. The weekly programme in the unit can be controlled by both the remote control and the touch panel. The heater has overheat, tip-over and child safety protection, which contributes to safe use. The product has an anti-freeze function to maintain a minimum temperature in the room and an open window detection function. The heater can be placed on the floor or mounted on the wall. This product is only suitable for occasional use or for use in well-insulated rooms.
    206,79€
    Tellimisel
    Countersunk rivet gun for steel and aluminium 3.2/4.0/4.8/6.0/6.4 mm rivets
    03-181061

    Professionaalsed hoob-needitangid on mõeldud teras- ja alumiiniumneetide kiireks ning tõhusaks paigaldamiseks. Tänu tugevale hoobmehhanismile võimaldab tööriist paigaldada ka suurema läbimõõduga neete väiksema jõukuluga, tagades mugava ja efektiivse töö.

    Tööriist sobib neetidele mõõtudes 3,2 mm, 4,0 mm, 4,8 mm, 6,0 mm ja 6,4 mm, mistõttu on see ideaalne lahendus ehitus-, metalli-, paigaldus- ja remonditöödeks. Vastupidav metallkonstruktsioon tagab pika kasutusea ning ergonoomilised käepidemed pakuvad kindlat haaret ja paremat kontrolli töö ajal.


    Omadused:

    • Sobib teras- ja alumiiniumneetidele
    • Toetab neetide mõõte: 3,2 mm, 4,0 mm, 4,8 mm, 6,0 mm ja 6,4 mm
    • Võimas hoobmehhanism vähendab vajalikku tööjõudu
    • Tugev ja vastupidav metallkonstruktsioon
    • Ergonoomilised käepidemed mugavaks kasutamiseks
    • Sobib professionaalseks ja intensiivseks kasutamiseks
    58,30€
    Tellimisel
    Quartz infrared heater 400/800W
    03-90112
    The 400/800 W quartz infrared heater 90-112 by NEO equipped with a heating element - a quartz heater guarantees quiet operation, without heating the air. It has two quartz lamps (400 W each) and a Tip-off switch. It supports two programmes with 400 and 800 watts of power. It operates at 220-240 V, 50-60 Hz. The radiant heater has a wide-angle heat reflector and a practical handle that makes it easy to move. The length of the 1.2 m cable allows free connection to mains power in any interior. The system that interrupts operation in the event of tipping over contributes to the safety of the unit's use. This economical radiant heater gives results as soon as it is switched on. It saves energy, using less than a standard heater. It does not stir up air, making it suitable for allergy sufferers. Guarantees safety due to built-in overheating protection, overload protection, short-circuit protection and the use of fire-resistant material. The NEO quartz infrared heater is recommended for heating homes, offices, workshops or holiday cottages.
    21,60€
    Tellimisel
    Long hexagonal socket 1/2", 9 mm
    03-08459
    Long hexagonal socket 1/2" NEO made ​​of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.
    2,80€
    Tellimisel
    Combination pliers 180 mm
    03-01251
    NEO combination pliers are made of hardened steel, additionally cutting surfaces are induction hardened. Ergonomic handles are coated with anti slip material and provide comfort and safety when working. Product perfectly fits in hand. Pliers have spreader spring that ensures arms spreading for better comfort at work. NEO brand meets expectations of professionals.
    8,70€
    Tellimisel
    Side cutting pliers 160 mm
    03-01275
    The 160 mm side pliers 01-275 by NEO TOOLS is a high quality universal tool belonging to the pliers series. Made from durable CS material and with a slim PVC handle. The handle has non-slip properties due to its textured, sure-footed design. NEO TOOLS brand side pliers are resistant to chemicals - grease, oil and fuel. They will prove useful in many different professional jobs.
    5,80€
    Tellimisel
    Microtorch 5 ml
    03-19906
    The NEO brand 5ml microfiller 19-906 has a handy pen shape and is easy to use. The 5 ml cartridge is adapted for quick filling. The microflame allows working for up to 15 minutes at a temperature of 1300 °C. The ergonomic shape makes it easy to manoeuvre the device during precision work. The microburner is equipped with a brass burner which is durable in use. It is recommended for home and professional use.
    14,20€
    Tellimisel
    Ceramic fan heater 800W/1500W
    03-90110
    The ceramic 800 W/1500 W 90-110 thermal heater by NEO is a fireplace heater with adjustable heating power, with two positions. It supports a voltage of 220-240V~50Hz. The NEO brand thermo heater has a built-in heating element - a ceramic heater. It is capable of heating an area from 20 to 30 m2. Its location on feet makes it more mobile and has a wider heating range. It is characterised by its flame effect, introducing a cosy atmosphere without harmful smoke or dangerous flames. It is an environmentally friendly device that ensures thermal safety. Its dimensions of 38x24x46 cm and low weight of 3 kg benefit storage during the summer months. The unit's built-in thermostatic temperature control, protection against overheating, overloading, the use of flame-resistant materials, the anti-scald grille and short-circuit protection are a number of features that make the presented fan heater have everything you would expect from this type of product. It is recommended for reheating flats, offices or holiday homes, for example. The elegant design of the NEO brand thermo fan makes it a universal device with many applications.
    80,80€
    Tellimisel
    Hexagonal socket 1/2", 11 mm
    03-08411
    Hexagonal Socket 1/2" 8 mm NEO made ​​of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.
    1,70€
    Tellimisel
    Notched float, 270 x 125 mm, 6 x 6 x 6 mm, plastic handle
    03-50204
    NEO serrated float (ref. no. 50-204) is designed for applying glue. Working surface made of high quality stainless steel. Ergonomic plastic handle fits well in hand for better work comfort. NEO brand meets expectations of professionals.
    5,80€
    Tellimisel
    Masonry scoop, 170 mm, wooden handle
    03-50252
    NEO masonry pan (ref. 50-252) is designed to pick up more mortar during masonry work. Made of metal and a wooden handle, well lying in your hand. NEO brand meets expectations of professionals.
    5,51€
    Tellimisel
    Strip extension cord 1.5 m, 3 x 1.5 mm2, 3G, black, ON/OFF
    03-90182

    1,5 m pikkune pikendusjuhe kolme maandusega pistikupesaga sobib kasutamiseks kodus, kontoris ja töökojas. ON/OFF-lüliti võimaldab kõik ühendatud seadmed mugavalt korraga sisse ja välja lülitada. Vastupidavad 3 × 1,5 mm² vaskjuhtmed tagavad usaldusväärse vooluülekande ning pikendusjuhe sobib kuni 16 A koormusele ja 3680 W maksimaalsele võimsusele.


    Tehnilised andmed:

    • Kaabli pikkus: 1,5 m
    • Juhtme ristlõige: 3 × 1,5 mm²
    • Pistikupesade arv: 3
    • Lüliti: ON/OFF
    • Värvus: must
    • Nimivool: 16 A
    • Nimipinge: 230 V
    • Maksimaalne võimsus: 3680 W
    • Pistik: tüüp E/F
    • Pistikupesad: tüüp E
    6,50€
    Tellimisel
    Electric heater 5kW industrial, adjustable settings, IPX4
    03-90069
    The 90-069 electric heater is a portable heat source designed to heat rooms such as workshops, garages, households, and shops. The heating element of the device is made of stainless steel, which provides protection against overheating. The IPX4 water resistance class allows the device to be used in damp and wet connections. The heater has an insulated plastic handle for easy portability. Powder coated metal housing protects the device against rust. The heater is characterized by high efficiency with a small footprint. Characteristic features: power 5kW; heating element: stainless steel; adjustable thermostat; adjustable angle of setting; protection against overheating; fan; full metal housing; strong and durable structure; insulated, safe handle; portable, free-standing.
    139,00€
    Tellimisel
    Gas soldering lamp for 190 g cartridges + 4 cartridge gas cartridges
    03-20045
    Gas soldering lamp for 190 g cartridges + 4 cartridge gas cartridges 20-045 by NEO TOOLS is a set of a soldering lamp and 4 cartridges with butane gas cartridges of 190 g each. The lamp is characterised by an operating temperature of up to a maximum of 1350°C and a power of 1.2 kW. Its average gas consumption is 87 g/h. The burner is made of solid brass and the housing is made of robust plastic. The piezo ignition influences the efficiency of the lamp start-up, offering readiness for use at almost any time. The gas locking system contributes to the safety of the entire set. The gas soldering lamp and 4 cartridge gas cartridges by NEO TOOLS are recommended, among others, for soldering plumbing, firing and kindling, as well as for many other applications.
    41,30€
    Tellimisel
    Galvanised staples for pneumatic stapler (14-570), GA18, Type 90 (4K), length 28 mm, 4000 pcs
    03-14626
    Galvanised staples for pneumatic stapler (14-570), GA18, Type 90 (4K), length 28 mm, 4000 pieces 14-626 by NEO are staples made of steel wire, galvanised, corrosion-resistant. They are designed for the NEO 14-570 pneumatic stapler. They are characterised by a length of 28 mm, type 90 (4K), GA18. They are offered in a set of 4000 pieces. Staples recommended for all kinds of work with pneumatic staplers. They will be suitable for professional applications.
    14,69€
    Tellimisel
    Long socket 1/2", 18 mm, 12 points
    03-08077
    NEO 1/2" long bihexagonal socket is made of durable chromium vanadium steel in accordance with DIN 3124. Tool quality confirmed with TÜV certificate and 25 years manufacturer's warranty. NEO brand meets expectations of professionals.
    3,70€
    Tellimisel
    Padlock 50 mm, 3 keys
    03-85052
    The 50 mm padlock, 3 keys 85-052 by NEO TOOLS is a copper-coated cast iron model with 3 keys. The yoke with a diameter of 6.5 mm and dimensions of 48 x 18 x 76 mm provides adequate strength, and the seals used protect the mechanism from rain, thus increasing the weather resistance of the NEO TOOLS padlock. It is a practical security device that will prove useful in various applications - both indoors and outdoors.
    3,60€
    Tellimisel
    Long socket 1/2", 21 mm, 12 points
    03-08080
    NEO 1/2" long bihexagonal socket is made of durable chromium vanadium steel in accordance with DIN 3124. Tool quality confirmed with TÜV certificate and 25 years manufacturer's warranty. NEO brand meets expectations of professionals.
    3,79€
    Tellimisel
    Strip extension cord 1.5 m, 3 x 1.5 mm2, 4G, black, ON/OFF
    03-90184

    1,5 m pikkune pikendusjuhe nelja maandusega pistikupesaga sobib kasutamiseks kodus, kontoris ja töökojas. ON/OFF-lüliti võimaldab kõik ühendatud seadmed mugavalt korraga sisse ja välja lülitada. Vastupidavad 3 × 1,5 mm² vaskjuhtmed tagavad usaldusväärse vooluülekande ning pikendusjuhe sobib kuni 16 A koormusele ja 3680 W maksimaalsele võimsusele.


    Tehnilised andmed:

    • Kaabli pikkus: 1,5 m
    • Juhtme ristlõige: 3 × 1,5 mm²
    • Pistikupesade arv: 4
    • Lüliti: ON/OFF
    • Värvus: must
    • Nimivool: 16 A
    • Nimipinge: 230 V
    • Maksimaalne võimsus: 3680 W
    • Pistik: tüüp E/F
    • Pistikupesad: tüüp E
    7,20€
    Tellimisel
    Screw-on gas burner
    03-20025
    Gas soldering torch for 227 g cartridges (type EN 417), piezo ignition, for vertical operation (+/- 80 degrees), operating temperature 1300 ° C, power 1.3 kW, average gas consumption 80 g / h, plastic housing momentary ignition button.
    7,50€
    Tellimisel
    Kategooria
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    Laoseis
    Kvaliteediklass
    Värvus
    Materjal
    Jalanõude Suurus
    Puuritav materjal
    Tööriistakinnitus
    Otsik
    Otsiku tüüp
    Suurus
    Tööriiete Suurus
    Puuri tüüp
    Update cookies preferences