Work sandals S1 SRA, composite toecap, size 39 82-079-41 by NEO are modern footwear with the S1 SRA protection category. They are distinguished by slip resistance on ceramic ground covered with sodium lauryl sulphate solution (SLS) - SRA and, among others, a built-in heel and anti-electrostatic insole - S1. The footwear has a composite toecap and a non-slip Eva and shock-absorbing rubber sole, resistant to abrasion, oil, petrol and other organic solvents. The sandals are covered with PU mesh fabric. They represent a fashionable look and high comfort. Recommended for the summer months, to be worn not only to work.
The Mix&Match, quilted, down, lightweight, black, size XXXL 81-576-1-XXXL jacket by NEO TOOLS is a lightly insulated down jacket with hood, made of 100% nylon and polyester filling. It has 3 practical zipped pockets and elastic piping in the sleeves. The adjustable hem and detachable hood allow you to adapt the NEO TOOLS jacket to the weather conditions and your personal preferences. The name tag, on the other hand, works well in the workplace. This garment model from the Mix&Match range is CE EN ISO 13688:2013 certified.
Premium PRO work T-shirt, size M, 81-609-M by NEO in black with a 3D print on the front in neon green. Made from 100% single jersey cotton with a weight of 180 g/m2. Additional knit finish for added volume. Back neck print with NEO brand logo. The T-shirt has a name tag and a round neckline with elasticated piping. It belongs to the unique Premium PRO design and is CE certified. Recommended for both work and casual wear.
Leather warm lined boots is the product from safety footwear category S3 SRC in accordance with EN ISO 20345. NEO boots are designed to protect feet from injuries. They are equipped with steel toes designed to provide protection against 200 J impacts and pressure of 15 kN, anti skid sole resistant to abrasion with shock absorbing system, resistant to oils, petrol and other organic solvents, resistant to skidding on ceramic floors covered with solution of sodium dodecylsulfate (SLS) and steel floors covered with glycerol. Footwear features integrated antipuncture insert, which protects against punctures from below, and antistatic insert. Resistance to water improves comfort of work in hard conditions, and warm lining with fake fur allows for use in low temperatures. The product has been evaluated for compliance and conforms to requirements of the European Union standards. NEO brand meets expectations of professionals.
Mix&Match work trousers, Canvas, black, size XXL 81-287-2-XXL by NEO TOOLS is a Canvas trouser model, made of 58% cotton, 39% polyester and 3% elastane, with a weight of 280 g/m2. They are characterised by their practical black colour. Thanks to the profiled knees and triple seams, they provide adequate durability and comfort. A knee pad pocket, a tool pocket on the thigh with a button-type clip and a webbing tool clip offer adequate storage space. The NEO TOOLS work trousers also offer better visibility with a reflective element on the side pocket, as well as better identification of the garment in the workplace - thanks to an ID badge space or name tag. The Mix&Match trousers are CE certified in accordance with EN ISO 13688:2013 and will work well for both professional and private purposes.
The NEO TOOLS half boots S1 FO, steel toecap, size 40, 82-162-40 by NEO TOOLS are footwear made in the protective category S1 FO, characterised by a toecap providing protection against impacts with an energy equal to 200J, resistance to oils, petrol and other organic solvents. NEO TOOLS work boots have a robust steel toecap, a flyknit knitted upper and a knitted "mesh" lining. The shoes are also equipped with a PU/PU sole and an EVA foam insole. The metal toecap protects the foot from injury. The upper of the NEO TOOLS flyknit type work boots is woven from a single thread, which contributes to the lightweight construction and very good fit of the footwear to the foot. The product is CE certified in accordance with the EN ISO 20345 standard.
NEO welding boots S1P SRC 82-180-43 are protective footwear dedicated to welding and metalworking. They are characterised by a robust leather upper made of extruded split leather, knitted mesh lining and PU sole. In addition, they are equipped with EVA foam, a metal toecap and a metal anti-puncture insole. NEO welding shoes are made in the S1P SRC category, which means their resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and on steel ground covered with glycerol. The toe cap additionally provides protection against impacts with an energy equivalent to 200 J. In turn, the sole protects against punctures and against oil, petrol and other organic solvents. The footwear has a built-in heel and energy absorption in the heel area. They are characterised by anti-electrostatic properties. Single and double seams ensure durability, and the lace guard fastened with a single strap and buckle reinforces the whole structure of the boots. NEO welding shoes are CE certified to EN ISO 20345 and are offered in sizes 39 to 47.
S1 SRC leather half boots, steel toecap, size 39, 82-160-39 by NEO are S1 SRC-rated work boots featuring an embossed split leather upper, metal loops and double and triple stitching to reinforce the structure. The steel toecap provides protection against impacts with an energy equivalent to 200 J. The boots have a built-in heel and resistance to oil, petrol and other organic solvents. They are characterised by anti-electrostatic properties. The energy absorption in the heel complies with the classification of safety footwear according to EN ISO 20345. The shoes are available in many sizes.
Mix&Match work trousers, 4 way stretch, navy blue-green, size S 81-295-3-S by NEO TOOLS is a trouser from the Mix&Match line, encouraging you to mix and match elements of your chosen workwear yourself. The trousers are made of durable 4 way stretch fabric, consisting of 92% polyester and 8% Spandex, with a weight of 230 g/m2. They feature a practical navy blue colour with energetic green elements. Double stitching, reinforcements on the knees with room for knee pads, reinforcements at the bottom of the legs and profiled knees contribute to the exceptional durability and robustness of this model. Thanks to the reflective print, they are ideal for work after dark. In turn, the tool clip and name tag increase their capabilities and make it easier to identify your clothing in a professional environment. NEO TOOLS work trousers are CE EN ISO 13688:2013 compliant.
NEO kneepads with soft fabric cushion (ref. 97-538) will enable you to work long hours in a kneeling position. The knee pads are made of 600D polyester for durability. They are equipped with 2 velcro fasteners allowing to fit various circumferences of the leg.
T-shirt red, size S 81-648-S by NEO made of soft knitted fabric, comfortable to wear. Manufactured from 100% cotton with a weight of 180g/m2. The T-shirt has short sleeves and a round neckline, finished with an elasticated piping. It has a printed logo on the neck and features a name tag for easy identification. The NEO brand T-shirt is CE certified. It is recommended for professionals and do-it-yourselfers for use on and off the job.
Tactical gloves, synthetic leather, size 8, 97-608-8 by NEO is a glove whose overall construction is made of 100% polyester. The grip part, on the other hand, is high quality synthetic leather and the upper part is a flexible polyester knit lined with thin foam. The military gloves have a welt end fastened with a convenient Velcro fastener. Offered in sizes 8 to 10, they will prove useful in situations where precise tool use is required.
The NEO TOOLS half boots S1 FO, steel toecap, size 44, 82-162-44 by NEO TOOLS are footwear made in the protective category S1 FO, characterised by a toecap providing protection against impacts with an energy equal to 200J, resistance to oils, petrol and other organic solvents. NEO TOOLS work boots have a robust steel toecap, a flyknit knitted upper and a knitted "mesh" lining. The shoes are also equipped with a PU/PU sole and an EVA foam insole. The metal toecap protects the foot from injury. The upper of the NEO TOOLS flyknit type work boots is woven from a single thread, which contributes to the lightweight construction and very good fit of the footwear to the foot. The product is CE certified in accordance with the EN ISO 20345 standard.
The 82-770 NEO occupational boots in O2 SR FO grade cowhide leather protect the foot from cold, soaking and water soaking. The boots have a mesh inner finish and reflective elements providing better visibility to the wearer. The boots are comfortable and durable thanks to the rigid and built-in heel and metal loops.
Mix&Match work trousers, 4 way stretch, navy blue-green, size XXXL 81-295-3-XXXL by NEO TOOLS are trousers from the Mix&Match line, which encourages you to mix and match elements of your chosen workwear yourself. The trousers are made of durable 4 way stretch fabric, consisting of 92% polyester and 8% Spandex, with a weight of 230 g/m2. They feature a practical navy blue colour with energetic green elements. Double stitching, reinforcements on the knees with room for knee pads, reinforcements at the bottom of the legs and profiled knees contribute to the exceptional durability and robustness of this model. Thanks to the reflective print, they are ideal for work after dark. In turn, the tool clip and name tag increase their capabilities and make it easier to identify your clothing in a professional environment. NEO TOOLS work trousers are CE EN ISO 13688:2013 compliant.
NEO women's working overalls of Woman Line series are made of high quality cotton and polyester fabric with plain weave. Special waistband design, elastic and adjustable braces and women's style allow to fit the overalls perfectly to silhouette. Profiled knees with pockets for protective knee pads and spacious pockets greatly improve comfort of work. Fashionable colour schemes and modern style allow for using the product also outside of workplace. Product quality is guaranteed by European certificate CE. NEO brand meets expectations of professionals.
HD Slim NEO work trousers (ref. 81-238-XXXL) are a comfortable and practical product. They are made of high-quality fabric with added elastane, and the areas most vulnerable to abrasion have been reinforced with Oxford fabric. Multifunctional pockets will store all necessary tools. A belt is attached to the trousers. The CE mark is a guarantee of safety, proving that the product meets all EU requirements. Available in XS-XXXL sizes. NEO brand meets professionals' expectations.
The S1P SR work sandals, steel toecap, steel anti-strike insole, size 41, 82-089-41 by NEO TOOLS are footwear in the protective category S1P SR (SR-slip resistance on sodium lauryl sulphate solution (SLS)-coated ceramic ground and glycerol-coated steel ground). They have an upper of suede leather and textile material. The knitted mesh lining, PU/PU sole and EVA insole contribute to the comfort of the footwear. NEO TOOLS work sandals are equipped with a steel toecap and a solid, also steel, anti-puncture insole. The non-slip sole with a shock-absorbing system, built-in heel and anti-electrostatic insole are responsible for safety and influence the comfort of use. The breathable upper is another advantage of this model of work footwear from the NEO TOOLS brand.
Industrial helmet with chin strap, blue 97-222 by NEO means assured head protection and comfort. The helmet is intended for workers at risk of injury. It is useful when working on scaffolding, in the warehouse and in excavation. It has an adjustable circumference of 52-64 cm and is made of ABS material. Equipped with a 6-point harness and a 4-point chin strap, it protects against impact from objects such as stones, tiles, bricks or other items that could pose a potential hazard. The helmet can be used in a temperature range of -30°C/+50°C. The automatic circumferential adjustment by means of a knob streamlines the donning and fitting of the product. The ventilation holes and the sweatband offered in the kit contribute to the comfort of the helmet, even when performing tasks for many hours. It is CE certified.
Mix&Match work trousers, 4 way stretch, with holsters, Cordura reinforcements, grey/black, size S 81-296-1-S by NEO TOOLS is a trouser from the Mix&Match line, which encourages you to mix and match elements of your chosen workwear. The trousers are made of durable 4 way stretch fabric with holsters, consisting of 91% nylon and 9% Spandex, with a weight of 230 g/m2. They have robust Cordura reinforcements on the tool and side pockets, on the knees and in the lower leg area. They feature a practical grey colour with black elements. With reflective inserts on the front and back of the knees, they increase the wearer's visibility after dark. Numerous pockets - a side pocket with tool straps, side zipped pockets and detachable side zipped pockets allow easy storage of many small items. The name tag, on the other hand, makes it easy to identify the garment in a professional environment. NEO TOOLS work trousers are CE EN ISO 13688:2013 certified.
