Pin Connector Set, 43 pieces VERTO (ref. 60H285) is an offer for the beginner or intermediate DIY enthusiast, which will allow you to easily make connections in wood or wood-based materials. With this set it is possible to make holes with diameters: 6, 8 and 10 mm. The set includes: 3 pcs wood drill bits, 3 pcs depth stops, 6 pcs markers indicating the place of drilling, 30 pcs dowels of three different diameters (6, 8, 10 mm), hex key.
Taskuühenduse komplekt 5 tk on praktiline abivahend tugevate ja varjatud puiduühenduste tegemiseks. Taskuühenduste süsteem võimaldab valmistada täpseid nurga all kruviavasid, mis tagavad puidudetailide kindla ühendamise ning puhta lõpptulemuse. Sobib kasutamiseks mööbli, riiulite, kappide ja muude puiduprojektide valmistamisel. Taskuühendusi kasutatakse laialdaselt puidutöödes kiireks ja vastupidavaks ühendamiseks.
Komplekti kuulub:
Taskuühenduse rakis
Puurimisjuhik
Vajalikud kinnitustarvikud
Komplektis kokku 5 osa.
Toote eelised:
Võimaldab teha tugevad ja peidetud kruviühendused
Sobib erinevate puiduprojektide valmistamiseks
Kiire ja täpne ühendusviis
Lihtne kasutada nii harrastajale kui ka professionaalile
HSS-Co 10.2 mm metal drill bit, 57-055 by NEO TOOLS is a deeply ground drill bit according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses a tip angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 87 mm and its overall length is 133 mm. The maximum speeds are: INOX 350-390 rpm, general metals 700-780 rpm. The purpose of this drill bit by NEO TOOLS is drilling in demanding materials such as stainless, acid-resistant and heat-resistant steel.
The SDS Plus 6 x 210 mm, quatro 54-102 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 6 mm and an overall length of 210 mm and a working length of 140 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
The SDS Plus 8 x 160 mm, quatro 54-109 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 8 mm and an overall length of 160 mm and a working length of 90 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Pro-Tec HSS-CNC metallipuuride komplekt sisaldab 19 kvaliteetset puuri mõõtudega 1,0–10,0 mm, pakkudes laia valikut enimkasutatavaid suurusi metalli- ja plastitöödeks. Komplekt sobib nii professionaalsetele kasutajatele kui ka nõudlikele kodukasutajatele, kes hindavad täpsust ja töökindlust.
Puurid on valmistatud vastupidavast M2 kiirlõiketerasest (HSS) ning sügavlihvitud vastavalt DIN 338 standardile. 124° tipunurk koos E-tüüpi ristterituse korrigeeringuga tagab täpse puurimise alguse, vähendab puuri libisemist ning võimaldab stabiilset ja puhtat puurimist erinevates materjalides.
Toote omadused:
Komplektis 19 metallipuuri
Mõõduvahemik: 1,0–10,0 mm
Seeria: Pro-Tec
Materjal: M2 kiirlõiketeras (HSS)
Standard: DIN 338
Tipunurk: 124°
Sügavlihvitud täppispuurid
Stabiilne juhtimine ja puhas puurimistulemus
Sobib professionaalseks ja igapäevaseks kasutamiseks
HSS-Co 7.0 mm metal drill bit, 10 pcs. 57-042-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 69 mm and its overall length is 109 mm. The maximum speeds are: INOX 525-575 rpm, general metals 1050-1150 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
The SDS Plus 6 x 110 mm, quatro 54-100 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 6 mm and an overall length of 110 mm and a working length of 40 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
HSS-CNC „Pro-Tec“ metallipuur on professionaalseks kasutamiseks mõeldud sügavlihvitud puur, mis on valmistatud kvaliteetsest M2 kiirlõiketerasest (HSS). Tänu 124° tipugeomeetriale ja E-tüüpi ristterakorrektsioonile võimaldab puur täpset puurimise alustamist ilma eelneva täkestamiseta ning tagab stabiilse juhtimise ka väikeste läbimõõtude puhul. Sobib terase, malmi, värviliste metallide ja plastide töötlemiseks.
Tehnilised andmed:
Tüüp: HSS-CNC metallipuur „Pro-Tec“
Läbimõõt: 2,5 mm
Materjal: HSS M2 kiirlõiketeras
Tipunurk: 124°
Ristterakorrektsioon: E-tüüp
Standard: DIN 338
Tööosa pikkus: 30 mm
Kogupikkus: 57 mm
Vars: silindriline
Maksimaalne soovituslik pöörlemiskiirus: 2200 p/min
The SDS Plus concrete drill bit, 9 x 260 mm, S4, quatro 57-419 by NEO TOOLS is a drill bit with a cross tip made of fine-grain carbide. The S4 double helix ensures that it has proper extraction and reduces the risk of overheating. The drill bit has a working length of 200 mm and an overall length of 260 mm. The accessory has an SDS Plus shank. Its intended use is concrete, brick, masonry and stone. NEO TOOLS drill bit is recommended for use with hammer drills and impact hammers.
The SDS Plus 16 x 600 mm, quatro 54-136 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 600 mm and a working length of 530 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
The SDS Plus 16 x 310 mm, quatro 54-134 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 310 mm and a working length of 240 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
HSS-Co 8.5 mm metal drill bits, 5 pcs. 57-048-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use an apex angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 75 mm and their overall length is 117 mm. The maximum speeds are: INOX 425-475 rpm, general metals 850-950 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
Pro-Tec HSS-CNC metallipuur on mõeldud täpseks ja puhtaks puurimiseks erinevatesse metallidesse ning plastidesse. DIN 338 standardi järgi sügavlihvitud puur on valmistatud vastupidavast M2 kiirlõiketerasest (HSS), mis tagab suure kulumiskindluse ja pika kasutusea.
Puuri 124° tipunurk koos E-tüüpi ristterituse korrigeeringuga parandab puurimise täpsust, vähendab puuri kõrvalekaldumist ning tagab stabiilse töö. Sobib kasutamiseks terases, malmis, värvilistes metallides (alumiinium, vask, messing) ning plastmaterjalides.
Toote omadused:
Läbimõõt: 6,5 mm
Seeria: Pro-Tec
Materjal: M2 kiirlõiketeras (HSS)
Standard: DIN 338
Tipunurk: 124°
Tööosa pikkus: 63 mm
Kogupikkus: 101 mm
Soovitatav maksimaalne pöörlemiskiirus: 1200 p/min
Täppislihvitud geomeetria puhtaks ja täpseks puurimiseks
HSS-Co 2.2 mm metal drill bits, 3 pcs. 57-015 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use an apex angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 27 mm and their overall length is 53 mm. The maximum speeds are: INOX 1650-1800 rpm, general metals 3300-3600 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 2.5 mm metal drill bits, 10 pcs. 57-018-10 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use an apex angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 30 mm and their overall length is 57 mm. The maximum speeds are: INOX 1450-1600 rpm, general metals 2900-3200 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
The SDS Plus 12 x 400 mm, quatro 54-120 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 400 mm and a working length of 330 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
HSS‑CNC „Pro‑Tec“ metallipuur on professionaalseks kasutamiseks mõeldud sügavlihvitud puur, mis on valmistatud kvaliteetsest M2 kiirlõiketerasest (HSS). Tänu 124° tipugeomeetriale ja E‑tüüpi ristterakorrektsioonile võimaldab puur täpset puurimise alustamist ilma eelneva täkestamiseta ning tagab stabiilse juhtimise kogu tööprotsessi vältel. Sobib terase, malmi, värviliste metallide ja plastide töötlemiseks.
Tehnilised andmed:
Tüüp: HSS‑CNC metallipuur „Pro‑Tec“
Läbimõõt: 4,2 mm
Materjal: HSS M2 kiirlõiketeras
Tipunurk: 124°
Ristterakorrektsioon: E‑tüüp
Standard: DIN 338
Tööosa pikkus: 43 mm
Kogupikkus: 75 mm
Vars: silindriline
Maksimaalne soovituslik pöörlemiskiirus: 1800 p/min
