Võimas 450 W ekstsentriklihvija, mis sobib erinevate pindade lihvimiseks ja viimistlemiseks. Seadmega on kaasas kaks lihvtalda läbimõõduga 125 mm ja 150 mm, mis võimaldavad valida töö jaoks sobiva suuruse. Sisseehitatud tolmuärastussüsteem aitab hoida töökoha puhtamana ning parandab kasutusmugavust.
Lihvijal on sujuvalt reguleeritav kiirus vahemikus 7000–13000 p/min, libisemiskindel käepide ning käivituslüliti lukustusfunktsioon pikemaajaliseks tööks. Tänu väikesele kaalule sobib seade ka ühe käega kasutamiseks.
Tehnilised andmed:
Tüüp: ekstsentriklihvija
Võimsus: 450 W
Toitepinge: 230 V
Lihvtalla läbimõõt: 125 mm / 150 mm
Pöörlemiskiirus: 7000–13000 p/min
Võnkeamplituud: 1 mm
Kiiruse reguleerimine: 5 astet + maksimaalne kiirus
Toitekaabli pikkus: 3 m
Kaal: 1,21 kg
Omadused:
Kaks vahetatavat lihvtalda (125 mm ja 150 mm).
Sisseehitatud tolmuärastussüsteem.
Reguleeritav pöörlemiskiirus täpseks tööks.
Libisemiskindel ergonoomiline käepide.
Lüliti lukustus pidevaks tööks.
Võimaldab töötada ühe käega tänu kompaktsele konstruktsioonile.
The 240 W oscillating sander, 110 x 100 mm foot 59G322 by GRAPHITE is a 240 W tool with a 110 x 100 mm foot. It reaches a no-load speed of 13000 min-¹ and has an amplitude of oscillation of 0,8 mm. The sander comes with 3 feet (square, rectangular and triangular), sanding papers (9 pieces) and a dust container with filter. The weight of the machine is 1.2 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the possibility of quickly changing the sanding paper. It has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
The 380 W orbital sander, 115 x 230 mm foot 59G329 by GRAPHITE is a 380 W tool with a 115 x 230 mm foot. It reaches speeds of 7,000 to 13,000 min-¹. Sandpaper and a dust container are offered with the sander. The weight of the machine is 2.1 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the ability to quickly change the sanding paper. It features a locking function for continuous operation. The sander has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Professionaalne 800 W kipsilihvija, mis on mõeldud kips-, pahtel- ja krohvipindade lihvimiseks. Seade on varustatud LED-valgustusega, mis tagab parema nähtavuse tööpiirkonnas ning võimaldab saavutada täpsema ja ühtlasema tulemuse.
Lihvijal on teleskoopkäepide, reguleeritav pöörlemiskiirus ning tõhus tolmuärastussüsteem, mille saab ühendada tolmuimejaga. Takjakinnitusega lihvpaberi vahetamine on kiire ja lihtne ning tööketas on kaitstud harjaga tolmu paremaks kogumiseks.
The 260 W orbital sander, 90 x 187 mm foot 59G326 by GRAPHITE is a 260 W tool with a 90 x 187 mm foot. It reaches speeds of 7,000 to 13,000 min-¹. 2x sanding papers and a dust container are offered with the sander. The weight of the machine is 1.7 kg. This sander model is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the ability to quickly change the sanding paper. It features a locking function for continuous operation. The sander has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Võimas 500 W multifunktsionaalne võnktööriist, mis sobib lõikamiseks, lihvimiseks, kraapimiseks ja viimistlustöödeks. Seadme võnkesagedus on reguleeritav vahemikus 8000–16000 min⁻¹, mis võimaldab tööriista kohandada erinevate materjalide ja tööde jaoks.
Tööriist on varustatud tolmueemaldusadapteriga ning takjakinnitusega lihvtallaga. Tänu laiale tarvikute valikule saab töödelda puitu, metalli ja keraamikat. Kompaktne konstruktsioon ja väike kaal võimaldavad mugavat kasutamist ka ühe käega.
Võimas ja mitmekülgne 710 W kipsilihvija, mis on mõeldud kips-, pahtel- ja krohvipindade lihvimiseks seintel ning lagedel. Seade on varustatud nii ümmarguse kui ka delta-lihvtallaga, mis võimaldavad töödelda nii suuri pindu kui ka nurki ja raskesti ligipääsetavaid kohti. Integreeritud LED-valgustus parandab nähtavust tööpiirkonnas ning aitab saavutada ühtlasema lihvimistulemuse.
Kipsilihvija teleskoopkäepide on reguleeritava pikkusega ning kokkupandav, mis muudab töö mugavaks ja lihtsustab seadme transportimist. Tolmuärastussüsteem koos painduva imuvoolikuga aitab hoida töökeskkonna puhtana.
Tehnilised andmed:
Tüüp: kipsilihvija
Võimsus: 710 W
Toitepinge: 230 V
Pöörlemiskiirus: 800–1700 p/min
Ümmarguse talla läbimõõt: 215–225 mm (allikates esineb mõlemat mõõtu)
Võimas 900 W kipsilihvija, mis on mõeldud kips-, pahtel- ja krohvipindade lihvimiseks. Seade on varustatud LED-valgustusega, mis parandab nähtavust tööalal ja aitab saavutada ühtlasema lihvimistulemuse.
Lihvijal on otseajamiga lihvketas, sujuvalt reguleeritav pöörlemiskiirus ning tõhus tolmuärastussüsteem, mille saab ühendada tolmuimejaga. Pikk toitekaabel ja painduv imuvoolik võimaldavad töötada suuremal alal ilma seadme ümberpaigutamiseta.
GRAPHITE circular saw (ref 58G488) with a 1200W motor that allows up to 5500 blade revolutions per minute. The saw has a bevel cutting capability from 0° to 45°. The maximum thickness of the material to be cut at a right angle is up to 65 mm and at a bevel up to 43 mm. Adjustment of the cutting angle and depth of cut is carried out without the use of tools - a special scale helps in setting the cutting parameters. The saw is equipped with a handle with an accidental start lock, covered with an anti-slip material, which makes work comfortable and safe. The saw is compatible with saw blades with an external diameter of 185 mm and a bore diameter of 20 mm. The saw housing is made of aluminium alloy. If necessary, it is possible to replace worn carbon brushes yourself. The saw comes with 2 cutting discs and a carrying case. CE certification ensures compliance with European standards. The machine is equipped with a flexible and robust 3m rubber-coated power cable, also dedicated to professional and industrial applications both indoors and outdoors.
Professionaalne liuglõikefunktsiooniga nurgasaag, mis sobib suurte puidu- ja puitmaterjalide täpseks lõikamiseks. Võimas 1800 W mootor, täpne lasersihtimine ning võimalus teha nii kald- kui ka nurglõikeid muudavad tööriista suurepäraseks valikuks puuseppadele, ehitajatele ja paigaldajatele.
Tehnilised andmed:
Võimsus: 1800 W
Saeketta läbimõõt: 254 mm
Hammaste arv: 60 (TCT kõvasulamhammastega)
Pöörlemiskiirus: 4800 p/min
Kaldlõike nurk: 0° kuni 45°
Nurglõike nurk: 0° kuni 45°
Toitejuhtme pikkus: 3 m
Omadused:
Liuglõikefunktsioon suuremate toorikute töötlemiseks.
Kiire reguleerimine levinumatele lõikenurkadele.
Integreeritud laser tagab täpse lõikejoone ja materjali positsioneerimise.
Tugev ja kompaktne alumiiniumisulamist konstruktsioon.
Metallist spindlilukk saeketta lihtsaks vahetamiseks.
Libisemiskindla kattega käepide tagab kindla ja mugava haarde.
Süsiharjade vahetamine väljastpoolt ilma tööriista lahti võtmata.
Vastupidav kummikattega toitejuhe professionaalseks kasutamiseks sise- ja välistingimustes.
Tile cutter 1500 W, 250 x 25 mm, 1200 mm cutting range, 3 m cable 59G892 by GRAPHITE is a specialist machine with 1500 W of power for precision cutting of tiles and stone up to 52 mm thick and 1200 mm maximum length. The tool features a bevel cutting range of 0° to 45°. It has a number of electrical safety features, including a PRCD residual current circuit breaker, as well as thermal protection for the electric motor. The cutter is equipped with a cutting head guide made of heat-resistant aluminium alloy and a table top covered with an anti-slip material to prevent uncontrolled movement of materials. The machine has a Class I protection rating and an IP54 protection level. The cutter's legs fold away for easier storage or transport. The flexible and robust power cable, in turn, is protected in a rubber sheath with a length of 3 m - it is recommended for professional and industrial applications, both indoors and outdoors. Compliance with European standards is confirmed by the CE certificate.
GRAPHITE's 1200 Watt specialist tile cutting machine for precision cutting of tiles and stone up to 58 mm thick. Maximum length of cut material up to 1260 mm. The bevel cutting range of the cutter is from 0 to 45°. The power tool has a number of electrical safety features, including a PRCD residual current circuit breaker and thermal protection for the electric motor. The device has Class I protection class, IP45 protection level. The copper-wound induction cutting motor can generate up to 3000 head revolutions per minute. The guide of the cutting head is made of heat-resistant aluminium alloy. The top of the cutter is covered with an anti-slip material, which prevents uncontrolled movement of materials. It is possible to fold the legs for easier transport and storage. The device is equipped with a flexible and durable power cord in rubber coating with a length of 2m, also dedicated to professional and industrial applications, both indoors and outdoors. CE certification ensures compliance with European standards.
2600W GRAPHITE metal cutting machine with 355 x 25.4mm blade for cutting workpieces up to 120mm thick. The cutter with a smooth start function, has the ability to adjust the angle of cutting in the range from 0° to 45°. The maximum rotational speed of the head is 3800 rpm. The vice of the cutter with rapid traverse of the feed screw has the possibility of increasing the range and setting the jaw for angle cutting. The automatically opening metal-made bottom guard for the cutting blade ensures user safety and allows quick access when changing the blade.
Saag on varustatud kokkupandava alumiiniumlauaga, mis muudab selle transportimise ja hoiustamise mugavaks. Sobib puidu ja puidupõhiste materjalide täpseks piki- ja ristlõikamiseks.
GRAPHITE circular saw with 1800W motor, capable of operating at speeds up to 5000 rpm. The device is designed to work with cutting discs with an outer diameter of 210 mm and allows you to make cuts in materials up to 73 mm thick. There is also the option of cutting at an angle of up to 45°. Angle and cutting depth adjustment is done without any tools - special graduations help in parameter settings. The safety of the operator is ensured by a two-stage switch preventing accidental operation. Comfortable and reliable guidance of the power tool is ensured by an additional handle with a wide grip surface. In the place visible to the operator, an indicator has been placed informing about connecting the power tool to the network and its readiness to work. The blade cover is made of aluminium alloy. Laser pointer integrated with the device makes it easier to determine the direction of cutting. The parallel guide provided with the tool allows for precise cutting along the edge of the material. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.
GRAPHITE circular saw with 1500W motor, capable of operating at speeds up to 5800 rpm. The device is designed to work with discs with an outer diameter of 185 mm and allows you to make cuts in materials up to 65 mm thick. There is also the option of cutting at an angle of up to 45°. Angle and cutting depth adjustment is done without any tools - special graduations help in parameter settings. The safety of the operator is ensured by a two-stage switch preventing accidental operation. Comfortable and reliable guidance of the power tool is ensured by an additional handle with a wide grip surface. In the place visible to the operator, an indicator has been placed informing about connecting the power tool to the network and its readiness to work. The blade cover is made of aluminium alloy. Laser pointer integrated with the device makes it easier to determine the direction of cutting. The parallel guide provided with the tool allows for precise sawing along the edge of the material. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.
Tile cutter 1200 W, 230 x 25 mm, 1000 mm cutting range, 3 m cable 59G891 by GRAPHITE is a specialist 1200 W machine for precision cutting of tiles and stone up to 43 mm thick and 1000 mm maximum length. The tool features a bevel cutting range of 0° to 45°. It has a number of electrical safety features, including a PRCD residual current circuit breaker, as well as thermal protection for the electric motor. The cutter is equipped with a cutting head guide made of heat-resistant aluminium alloy and a table top covered with an anti-slip material to prevent uncontrolled movement of materials. The machine has a Class I protection rating and an IP54 protection level. The cutter's legs fold away for easier storage or transport. The flexible and robust power cable, in turn, is protected in a rubber sheath with a length of 3 m - it is recommended for professional and industrial applications, both indoors and outdoors. Compliance with European standards is confirmed by the CE certificate.
GRAPHITE plunge saw 1200 W is a precision device used for making cuts in materials such as wood, laminate or aluminum. The design of the saw-plunge cutter allows you to make plunge cuts anywhere in the material - without the need to start cutting from the edge, as is the case with traditional circular saws. The device works with cutting discs with a diameter of 165 mm and enables operation at a regulated speed in the range of 2200-5200 rpm. For better precision when making longer formatting cuts, it is recommended to use a guide rail, which is also included in the GRAPHITE offer. The maximum cutting thickness without a guide rail is 57 mm, while the slat is 52 mm. The device is equipped with a depth stop with a precise graduation and indicator, which allows you to easily choose the depth when working with or without the skirting board. The sawing-cutting deck is equipped with a slack adjustment system in relation to the guide rail and enables adjustment of the cutting angle in the range of 0-47 °. The blade guard is made of aluminum, and the entire side of the device has been profiled in such a way as to minimize the distance between the disk and the outer edge of the housing. This means that the minimum distance of the cutting line from an obstacle, eg in the form of a wall, is only 11.5 mm. The device is equipped with rotary chip discharge with the option of connecting a vacuum cleaner. The tool is equipped with flexible and strong power cord in rubber coating, 2 m long, also designed for professional and industrial applications for use indoors and outdoors.
