Suruõhutehnika

Tehnilised andmed:

• Tootlikkus: 485 l/min
• Maksimaalne rõhk: 10 bar
• Mahuti maht: 200 l
• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz, 3-faasiline
• Õhu väljund: 1/2"
• Helirõhutase: 60 dB(A)
• Mõõtmed (P × L × K): 1440 × 510 × 1280 mm
• Kaal: 151 kg

• Two-cylinder high-performance units made of gray cast iron for a long service life
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Ten-year guarantee against rusting through on powder-coated compressed air tanks

• Two-cylinder high-performance units made of gray cast iron for a long service life
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and therefore less moisture in the compressed air
• Sturdy metal belt guard
• 400 volt models with phase inverter as standard for easy manual reversal of the direction of rotation
• Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve
• Including all safety devices
• Completely ready for connection
• Filter pressure regulator with one pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for tank pressure
• Ten-year guarantee against rusting through on powder-coated compressed air tanks
• Includes high-quality one composite safety coupling and high-quality CONDOR pressure switch
• Flexible armored hose line with heat protection for long service life without vibration breakage
• Ergonomic handle, rubber handle and transport handle on the compressed air tank for convenient transportation
• Sturdy steering chassis with parking brake in combination with large, puncture-proof wheels for comfortable transportation

Tehnilised andmed:

• Kompressori tüüp: kruvikompressor
• Töörežiim: püsikiirusega 
• Määrimine: õliga määritud
• Efektiivne tootlikkus: 3600 l/min
• Maksimaalne töörõhk: 7,5 bar
• Õhu väljund: 1 1/4"
• Õli kogus: 15 l
• Mootori võimsus: 22 kW
• Mootori efektiivsusklass: IE4
• Mootori pöörlemiskiirus: 3000 p/min
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Müratase: 60 dB(A)
• Juhtimissüsteem: LOGIN elektrooniline juhtimine 4,3" puuteekraaniga
• Ülekanne: otsesidur 
• Õlijahuti: jah
• Täht-kolmnurk käivitus: jah
• Paigaldus: statsionaarne
• Pikkus: 1330 mm
• Laius: 850 mm
• Kõrgus: 1370 mm
• Kaal: 620 kg

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Increased flexibility thanks to two compressed air tanks
• High-quality and expandable equipment
• Smooth and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

Increased flexibility thanks to two compressed air tanks

• Two 100 liter compressed air tanks ready mounted on a safety pallet
• Doubling of the air supply by switching on the second compressed air tank - an increased air requirement is covered at short notice
• Halving the tank volume by disconnecting the second compressed air tank - allows pressure to be built up quickly, e.g. for chiseling or sandblasting work

High-quality equipment

• Hot-dip galvanized compressed air tanks inside and out with a 15-year guarantee against rusting through
• Splash water protection in accordance with IP 54
• Flexible armored hose lines with heat protection prevent vibration fractures
• With phase inverter on the plug as standard
• Ready for connection with all fittings
• Additional equipment for compressed air preparation and discharge available

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Absolute Low maintenance drive with maximum energy efficiency through direct-coupled coaxial screw compressors
• Standard EasyTronic IV control prevents engine overload, reduces wear and ensures a longer service life
• High cooling effect and lower noise level due to thermostatically controlled centrifugal fan
• Longer life of the device and lower fluctuations of the oil temperature thanks to thermostatically controlled fan, optimal cooling air flow and generously dimensioned heat exchanger
• Less effort for drying and filtration of the compressed air generated by integrated aftercooler
• Secured maintenance intervals by recording the load and follow-up times via operating hours counter
• Display of the maintenance requirement via automatic message
• Avoidance of damage during commissioning or after relocation due to integrated direction of rotation control for the motor
• Service-friendly due to optimal accessibility and easy assembly / disassembly of all serviceable components
• Easy transport and setup due to small outer dimensions
• Monitoring of engine and compressor speed by SpeedTronic Control

Based on the frequency converter technology, the delivery volume of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced advanced technology in a small space.

• Active energy saving
• Ideal for frequently changing compressed air consumption
• The variable speed compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates widely.

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

Aircraft A-K-MAX 11-08-500 K (IE3) on suure jõudlusega statsionaarne kruvikompressor, mis on varustatud 500-liitrise suruõhumahuti ja nutika LOGIN juhtsüsteemiga. Seade sobib tööstuslikuks kasutamiseks ning tagab stabiilse suruõhu tootmise, vaikse töö ja lihtsa hooldatavuse. LOGIN juhtimine võimaldab jälgida kõiki olulisi tööparameetreid 4,3-tollise puuteekraani kaudu ning ühendada ühtseks süsteemiks kuni kaheksa kompressorit.

Tehnilised andmed:

• Mootori võimsus: 11 kW
• Mootori efektiivsusklass: IE3
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori pöörlemiskiirus: 3000 p/min
• Maksimaalne töörõhk: 8 bar
• Efektiivne tootlikkus: 1700 l/min
• Suruõhumahuti maht: 500 l
• Õhuühendus: 3/4"
• Müratase Lp: 67 dB(A)
• Õlitäite kogus: 8,05 l
• Ülekanne: otseühendus
• Kompressori tüüp: õliga määritav
• Paigaldusviis: statsionaarne
• Mõõtmed (P × L × K): 2000 × 730 × 1660 mm
• Kaal: 410 kg

Tehnilised andmed:

• Imivõime: 850 l/min.
• Tootlikkus: 660 l/min (6 bar juures).
• Maksimaalne töörõhk: 10 bar.
• Õhumahuti maht: 100 l.
• Mootori võimsus: 5,5 kW.
• Toitepinge: 400 V / 50 Hz.
• Surveastmeid: 2.
• Kaal: 120 kg.

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Optimized oil separation system
• Integrated design of the compressor unit
• Lightweight, compact and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

Area of application

• Small space requirement, ideal e.g. for car washes, biogas or fire extinguishing systems, small workshops and mobile use
• Also ideal as an auxiliary compressor to supplement existing systems, e.g. to cover compressed air base loads and peaks

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

Tehnilised andmed:

• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz
• Maksimaalne töörõhk: 10 bar
• Efektiivne tootlikkus: 485 l/min
• Suruõhu väljund: 1/2"
• Õlikogus: 2,2 l
• Mahutite kogumaht: 200 l (2 × 100 l)
• Külmkuivati: standardvarustuses
• Eel- ja peenfilter: standardvarustuses
• Automaatne kondensaadieemaldaja (AMD): jah
• Õli/vee separaator: WOS 1
• Rõhukastepunkt: +3 °C (ümbritseva õhu temperatuuril 25 °C)
• Müratase: 61 dB(A)
• Mõõtmed (P × L × K): 1250 × 950 × 1430 mm
• Kaal: 228 kg

Varustus:

• Ribirihmülekandega kruvikompressor
• Külmkuivati koos eel- ja peenfiltriga
• Automaatne kondensaadieemaldaja (AMD)
• Õli/vee separaator WOS 1
• 2 × 100 l kuumtsingitud suruõhumahutit
• Turvaalus nelja vibratsioonisummutava elemendiga

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain

Peamised eelised:

• Statsionaarne kolbkompressor professionaalseks kasutamiseks
• Integreeritud külmkuivati kuiva suruõhu tootmiseks
• Kahe silindriga malmist HOS-kompressoriagregaat
• Vaikne ja vähese vibratsiooniga töö
• Vahe- ja järeljahuti niiskuse vähendamiseks suruõhus
• Madalad pöörded tagavad pikema kasutusea
• Energiasäästlik hammasrihmülekanne
• Kvaliteetne CONDOR automaatne rõhulüliti
• Mootori kaitselüliti ja käivituskoormuse vabastusventiil
• Kuumtsingitud suruõhumahuti 15-aastase korrosioonigarantiiga
• Täisautomaatne sisse- ja väljalülitus

Tehnilised andmed:

• Tootja: Aircraft
• Mudel: AIRPROFI 703/270/10 VK
• Tootjakood: 2024712K
• Kompressori tüüp: statsionaarne kolbkompressor külmkuivatiga
• Silindrite arv: 2
• Kompressori agregaat: HOS malmist kõrgsurveagregaat
• Mahuti maht: 270 l
• Maksimaalne töörõhk: 10 bar
• Jahutus: vahe- ja järeljahuti ning suur jahutusventilaator
• Ülekanne: hammasrihmülekanne
• Elektrimootor: mootori kaitselülitiga
• Rõhulüliti: CONDOR
• Mahuti: sise- ja välispidiselt kuumtsingitud
• Korrosioonigarantii: 15 aastat

Sobib kasutamiseks:

• Autotöökodades
• Tootmisettevõtetes
• Metalli- ja puidutööstuses
• Pneumaatiliste tööriistade toiteks
• Suruõhusüsteemides, kus on oluline kuiv suruõhk

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Suitable for installation even in noise-sensitive areas and the direct working environment
• Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
• High-quality Condor pressure switch
• Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
• Quality electric motor with motor protection switch and start-up relief
• Integrated phase monitoring
• Facility for easy tensioning of the V-belt
• Service-friendly design
• Ready for connection with all fittings and safety devices
• Models with compressed air tank: Galvanised air reservoir inside and out with 15-year warranty against rusting through

Vastupidav ja suure jõudlusega statsionaarne kolbkompressor professionaalseks kasutamiseks töökodades ja tootmisettevõtetes. Kaheastmeline malmist kompressoriplokk, 270-liitrine mahuti ning kuni 520 l/min tootlikkus tagavad piisava suruõhuvaru ka nõudlike pneumotööriistade jaoks. Madal pöörlemiskiirus vähendab kulumist ja mürataset, samas kui tõhus jahutussüsteem ning kvaliteetsed komponendid tagavad pika tööea ja usaldusväärse töö.

Tehnilised andmed:

• Tootja: Aircraft
• Mudel: AIRSTAR 703/270/10 V
• Tootekood: 2028750
• Maksimaalne töörõhk: 10 bar
• Mahuti maht: 270 l
• Imivõimsus: 650 l/min
• Efektiivne tootlikkus (täitejõudlus): 520 l/min
• Kompressoriastmeid: 2
• Silindreid: 2
• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz, 3-faasiline
• Kompressoriploki pöörlemiskiirus: 950 p/min
• Müratase (helirõhutase): 80 dB(A)
• Õhu väljavõte: ¾"
• Mõõtmed (P × L × K): 720 × 720 × 1770 mm
• Netokaal: 139 kg
• Brutokaal: 166 kg

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank