A-K-MAX 55-08 (IE4) kruvikompressor on varustatud energiatõhusa IE4 mootoriga, LOGIN puuteekraani juhtsüsteemiga ja kuni 10 100 l/min tootlikkusega. Sobib nõudlikeks tööstuslikeks suruõhurakendusteks.
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
AIRPROFI 703/10 Silent on professionaalne mürasummutatud statsionaarne kolbkompressor. Imemisvõimsus 674 l/min, tootlikkus 550 l/min ja müratase vaid 63 dB(A) tagavad tõhusa ning vaikse töö tööstuses, töökodades ja muudes müratundlikes keskkondades. Vastupidav malmist kompressoriplokk ning kvaliteetsed komponendid tagavad pika kasutusea.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Aircraft ACS 3,5-10 2x100 K kruvikompressor on varustatud kahe 100-liitrise õhumahutiga ning tagab kuni 380 l/min tootlikkuse 10 bar rõhul. Ideaalne lahendus pidevaks suruõhu kasutamiseks tööstuses ja töökojas.
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Rotation direction control for the motor, prevents damage during start-up or after a change of location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Easy to service: simple removal and installation of all components requiring maintenance
Latest generation IE4 permanent magnet motor for max. energy efficiency
Larger speed/load range
Larger delivery volume supply range
Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
Very quiet operation - only 64 dB
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Advanced and efficient cutting-edge technology in the smallest possible space
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Energy savings through frequency-controlled compressors
Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS range, with outputs of 22, 37, 55 and 75 kW, is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy.
A frequency converter dynamically adjusts the voltage, frequency and current values of the motor. The air output is constantly set to 50 to 100 percent of the full load of the compressor. This gives the following measurable positive effects:
Accurate coverage of the air requirement by continuous control of the engine speed and compressed air generation
Minimization of unnecessary energy losses by continuous adjustment of the compressed air generation to the actual air requirement
Energy consumption proportional to the supplied compressed air
Constant and precise pressure control, adjustable to any value between 6 and 10 bar (13 bar on request)
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
AIRPROFI 703/270/15 V on professionaalne statsionaarne kolbkompressor, mille 270-liitrine mahuti, kuni 15-barine töörõhk ja 650 l/min imemisvõimsus tagavad töökindla suruõhuvarustuse nõudlikes tööstus- ja töökojarakendustes. Kaheastmeline survesüsteem võimaldab kuni 520 l/min efektiivset tootlikkust ning sobib suure rõhuvajadusega seadmete ja tööprotsesside jaoks.
