Bits PH3 x 50 mm, 3 pieces 56T538 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T15 x 25 mm, 3 pieces 56T523 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
NEO TOOLS HEX4 löökotsikud on kompaktsed ja löögikindlad otsikud kuuskantpeaga kruvide jaoks, mis on valmistatud vastupidavast S2 terasest ja sobivad intensiivseteks montaažitöödeks.
HEX4 profiil tagab kruvis kindla ja täpse istuvuse, vähendades libisemist ja kulumist. 1/4" HEX‑kinnitus tagab laia ühilduvuse erinevate otsikuhoidikute ja otsikumagasinidega.
2‑osaline komplekt võimaldab otsikuid mugavalt vahetada ja tagab töö sujuvuse hoolduses, montaažil ning töökojas.
PZ2 x 50 mm bits, 3 pieces 56T533 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Hex bits H5 x 25 mm, 3 pieces 56T530 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
NEO TOOLS PH2 löökotsikud on 25 mm pikkused kruvikeerajaotsikud. Komplekt sisaldab 2 otsikut.
Otsikud on valmistatud vastupidavast S2 terasest, mis tagab suure kulumiskindluse ja töökindluse ka intensiivsel kasutamisel. Neil on 1/4" HEX‑kinnitus, mis sobib enamiku löökkruvikeerajate ja otsikuhoidikutega.
NEO TOOLS löökotsikud sobivad suurepäraselt nii professionaalseks kasutamiseks kui ka isetegemise töödeks, pakkudes usaldusväärset ja täpset tulemust.
Bits PH2 x 50 mm, 3 pieces 56T539 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T25 x 25 mm, 3 pieces 56T521 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
PZ3 x 50 mm, 3 pieces 56T532 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
GRAPHITE PH2 kruvikeeraja otsikute komplekt koosneb kahest 25 mm pikkusest otsikust, mis on varustatud sügavuspiirajaga. Piiraja võimaldab kruvide täpset ja ühtlast sügavusse keeramist, vältides materjali kahjustamist. Sellised otsikud sobivad eriti hästi kipsplaadi, paneelide ja muude plaatmaterjalide paigaldamiseks.
Otsikud on valmistatud kulumiskindlast kroom‑vanaadiumterasest (CrV), mis tagab hea vastupidavuse ja pika kasutusea. Standardne 1/4" kuuskantkinnitus muudab need ühilduvaks enamiku akutrellide ja kruvikeerajatega.
Tehnilised andmed:
Tüüp: Phillips PH2
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: kroom‑vanaadiumteras (CrV)
Lisafunktsioon: sügavuspiiraja
Komplektis: 2 tk
Kasutusala: kipsplaadi ja paneelide paigaldus, üldised kruvitööd
GRAPHITE PZ1 kruvikeeraja otsikute komplekt koosneb kahest 25 mm pikkusest otsikust, mis on varustatud sügavuspiirajaga. Piiraja võimaldab kruvide ühtlast ja kontrollitud sügavusse keeramist ning aitab vältida materjali kahjustamist. Sellised otsikud sobivad eriti hästi kipsplaadi, paneelide ja muude plaatmaterjalide paigaldamiseks.
Otsikud on valmistatud vastupidavast kroom‑vanaadiumterasest (CrV), mis tagab hea kulumiskindluse ja pika kasutusea. Standardne 1/4" kuuskantkinnitus teeb need ühilduvaks enamiku akutrellide ja kruvikeerajatega.
Tehnilised andmed:
Tüüp: Pozidriv PZ1
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: kroom‑vanaadiumteras (CrV)
Lisafunktsioon: sügavuspiiraja
Komplektis: 2 tk
Kasutusala: kipsplaadi ja paneelide paigaldus, üldised kruvitööd
PZ2 x 25 mm, 3 pieces 56T536 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
SL5 x 0.8 x 25 mm bits, 3 pieces 56T546 by GRAPHITE is a set of three bits designed for assembly and service work. Each bit has a flat end of 5mm wide and 0.8mm thick. The working length of the bit is 25mm. They are made from durable CrV steel, ensuring durability and wear resistance. The standard 1/4" chuck makes GRAPHITE bits compatible with most drills and drill drivers. The product is designed for tightening and loosening screws and bolts with a flat socket.
Torx bits T40 x 25 mm, 3 pieces 56T518 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx T8 x 25 mm, 3 pieces 56T526 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T9 x 25 mm, 3 pieces 56T525 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
Hex bits H4 x 25 mm, 3 pieces 56T531 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
GRAPHITE liimieemaldusketas 55H811 läbimõõduga 88 mm on tõhus tööriist kleebiste ja liimijääkide eemaldamiseks auto keredelt nii professionaalseks kui ka hobikasutuseks. Ketas on valmistatud vastupidavast, kuid samas pehmest kummist, mis ei kriimusta pinda. Ketta paksus on 15 mm ja maksimaalne lubatud pöörlemiskiirus 4000 p/min. Sobib kasutamiseks ka muudel töödel.
Hex bits H6 x 25 mm, 3 pieces 56T529 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Hex bits H8 x 25 mm, 3 pieces 56T528 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
