Sanding papers 93 x 230 mm, P100, 5 pieces, unperforated 58T258 by GRAPHITE are P100 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures that the paper is sufficiently effective. GRAPHITE sanding papers are offered in a practical set of 5.
HSS metal drills, DIN 338, 5.5 mm, 2 pieces 54T955 by GRAPHITE is a set of 2 metal drills, characterised by a diameter of 5.5 mm, an overall length of 93 mm and a working part length of 57 mm. The drills are made from HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Velcro sanding discs 125 mm, P60, 5 pieces, with 8 holes 58T289 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P320, 58T219 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 150 mm, P180, 5 pieces, with 8 holes 58T281 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
HSS-G metallipuuride komplekt sisaldab 13 kvaliteetset metallipuuri, mille läbimõõdud jäävad vahemikku 1,5–6,5 mm. Puurid on valmistatud vastupidavast HSS-G kiirlõiketerasest, mis tagab täpse puurimise, hea kulumiskindluse ning pika kasutusea.
Puuridel on silindriline vars ja 118° teritusnurk, mis võimaldab täpset puurimise alustamist ning puhta tulemuse saavutamist. Puurid vastavad standardile DIN 338 ning sobivad ideaalselt nii metallitöödeks töökojas kui ka kodukasutuseks.
Sanding discs, perforated, Velcro with holes 225 mm, P100, 5 pieces 58T273 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Sanding discs, perforated, Velcro with holes 225 mm, P60, 5 pieces 58T271 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Pitchfork wood router bits, 6mm shank, set of 12 pcs. 56T613 by GRAPHITE is a set of fork cutters with 6 mm shank, consisting of 12 pieces of different shapes and sizes, for woodworking. The blades are made of tungsten carbide, which ensures the accessories are durable and cut with precision. The GRAPHITE brand cutters are suitable for use with router bits and allow you to cut edges, grooves and make decorative profiles. The set includes cutters with diameters from 6 mm to 31.8 mm and various cutting angles and radii. Each cutter is fitted with a detachable bearing for easy operation and maintenance.
Saw blade, widia, 130 x 30 mm, 24 teeth 57T205 by GRAPHITE, with an external diameter of 130 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Sabre saw blade, HCS, 300 x 19 x 1.3 mm, 6 TPI, set of 2 pieces 58-046 by NEO TOOLS with HCS blade and 6 TPI pitch, features dimensions 300 x 19 x 1.3 mm. The tooth pitch is 4 mm. The blade is designed for straight and rough cuts in wood (6-250 mm), plywood and plastics in the range of 6-250 mm. The NEO TOOLS brand set contains 2 pieces of tools.
Sanding sponge 70 x 25 x 100 mm, P60, 58T160 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
Sanding canvas in roll 2.5 m x 115 mm, P180, 58T445 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
GRAPHITE's 75mm diameter, crimped steel wire butt brush, M14, 57T428 is made from crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
P100 karedusega lihvkettad sobivad pindade vahelihvimiseks, tasandamiseks ning ettevalmistamiseks enne viimistlustöid. Takjakinnitus võimaldab kulunud lihvketta kiiret ja mugavat vahetamist, tagades tõrgeteta töö. Lihvkettad sobivad puidu, metalli ja plastiku töötlemiseks. Kuna kettad on ilma tolmuavadeta, sobivad need lihvmasinatele, mis ei vaja tolmueemaldusavadega tarvikuid. Pakendis on 5 lihvketast.
Segmented diamond cutting disc, 115 x 22.2 mm, dry and wet 57T306 by GRAPHITE is a segmented dry and wet cutting disc with a diameter of 115 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
GRAPHITE's 6.35mm pilot drill adapter for bi-metal holesaws 32-152mm, Hex 56T754 is designed for bi-metal holesaws with diameters from 32 to 152mm. It has a 7/16" HEX shank. The pilot drill bit is made of HSS material. The adapter is used when drilling in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The set includes a screw-mounted guide drill bit. The GRAPHITE brand adapter is designed for mounting bi-metal holesaws in drills.
GRAPHITE's 14 TPI, HCS, 65 mm 57T505 plunge-cutting blade for the multifunction machine is a tool made of tough carbon steel (HCS), with a working width of 65 mm and 14 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 1.75 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.
The 40 mm bi-metal hole saw 56T709 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 220 rpm, Inox steel - 110 rpm, aluminium - 330 rpm, wood - 290 rpm, cast iron - 145 rpm, brass - 290 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
The 50 mm nylon butt brush with 6 mm shank 57T418 by GRAPHITE is made of nylon. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many woodworking tasks.
