Velcro sanding papers 93 x 185 mm, P80, 5 pieces, with 8 holes 58T242 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Velcro sanding discs 125 mm, P40, 5 pieces, with 8 holes 58T288 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding papers 93 x 230 mm, P240, 5 pieces, unperforated 58T263 by GRAPHITE are P240 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures good performance. GRAPHITE sanding papers are offered in a practical set of 5.
Velcro sanding papers 93 x 185 mm, P120, 5 pieces, with 8 holes 58T244 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
GRAPHITE kvaliteetsed lihvpaberid on mõeldud kasutamiseks takjakinnitusega vibrolihvijatel ja viimistluslihvijatel. Mõõtudega 98 × 140 mm lihvpaberid sobivad puidu, metalli, pahteldatud pindade, värvitud detailide ning plastmaterjalide peeneks töötlemiseks.
P220 karedusega abrasiiv sobib eriti hästi viimistluslihvimiseks enne värvimist, lakkimist või muude pinnakatete pealekandmist. Peen tera aitab saavutada sileda ja kvaliteetse pinna, vähendades lihvimisjälgede nähtavust ning parandades lõppviimistluse kvaliteeti.
Takjakinnitus võimaldab lihvpaberit kiiresti ja tööriistavabalt vahetada. Viie tolmueemaldusavaga disain tagab tõhusa tolmueemalduse, vähendab abrasiivi ummistumist ja aitab saavutada ühtlasema lihvimistulemuse. Sarnase GRAPHITE lihvpaberiseeria tehniliste andmete järgi on tegemist 98 × 140 mm mõõdus, takjakinnitusega ja avadega lihvpaberitega.
Omadused:
Sobib vibrolihvijatele ja viimistluslihvijatele
Takjakinnitus kiireks ja lihtsaks vahetamiseks
5 tolmueemaldusava tõhusaks tolmukogumiseks
Sobib puidu, metalli, plasti, pahtli ja värvitud pindade lihvimiseks
GRAPHITE's 67 mm 56T715 bi-metal hole saw, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 130 rpm, Inox steel - 65 rpm, aluminium - 195 rpm, wood - 170 rpm, cast iron - 85 rpm, brass - 170 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding canvas in roll 2.5 m x 115 mm, P60, 58T441 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
The circular wire brush 125 x 20 mm, crimped wire, steel 57T434 by GRAPHITE is made of crimped steel wire. Its maximum speed is 6000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.3 mm (1/2"), 2 x 16 mm (5/8"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks.
Sanding cloth 230 x 280 mm, P220, 58T350 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for final smoothing of coatings.
Sanding discs, perforated, on Velcro with holes 225 mm, P150, 5 pieces 58T275 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by the grain of electrocorundum. GRAPHITE abrasive discs are recommended for many tasks.
The Wood Drill, Extended 8 x 250 mm 54T566 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 8 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Velcro sanding discs 150 mm, P100, 5 pieces, unperforated 58T174 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P100 - medium grade - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick replacement of GRAPHITE discs and comfortable working.
Velcro sanding papers, iron 102 x 152 mm, P120, 5 pieces, with 11 holes 58T304 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the parts and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
The Hex 8.0 mm wood drill bit 54T581 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX shank. It is characterised by a diameter of 8 mm and a length of 110 mm. It is suitable for tasks with a maximum speed of 2000 rpm. It will work well for many DIY tasks.
Endless belts 75 x 457 mm, P120, 3 pcs. 58T364 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and a grain of electro-corundum. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
The Wood Drill, Extended 14 x 250 mm 54T569 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 14 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
