The 100 mm wire wheel brush, crimped wire, brassed with 6 mm shank 57T404 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank to allow operation with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The Hex chamfer, 10 mm 54T419 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
GRAPHITE's 16 mm 56T701 bi-metal hole saw 56 mm high allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 550 rpm, Inox steel - 275 rpm, aluminium - 825 rpm, wood - 760 rpm, cast iron - 365 rpm, brass - 730 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
With a height of 44mm, GRAPHITE's 152mm bi-metal hole saw 56T721 allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 55 rpm, Inox steel - 25 rpm, aluminium - 85 rpm, wood - 75 rpm, cast iron - 35 rpm, brass - 75 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding cloth 230 x 280 mm, P24, 58T340 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for rough removal of coatings, both in manual and machine sanding.
Velcro sanding discs 125 mm, P80, 5 pieces, without holes 58T182 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P80 - medium - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick changing of GRAPHITE discs and comfortable working.
GRAPHITE's 5 x 85mm 56T202 concrete drill bit with cylindrical shank, has a diameter of 5mm, an overall length of 85mm and a working length of 51mm. Recommended for concrete, brick and stone applications.
P120 karedusega lihvkettad sobivad peeneks vahelihvimiseks ning pindade ettevalmistamiseks enne värvimist, lakkimist ja muid viimistlustöid. Takjakinnitus tagab lihvketta kiire ja mugava vahetamise, aidates tööaega kokku hoida. Lihvkettad sobivad puidu, metalli ja plastiku töötlemiseks ning on valmistatud kvaliteetsest abrasiivmaterjalist tõhusa ja ühtlase lihvimistulemuse saavutamiseks. Kuna kettad on ilma tolmuavadeta, sobivad need lihvmasinatele, mis ei vaja tolmueemaldusavadega tarvikuid. Pakendis on 5 lihvketast.
Kvaliteetne takjakinnitusega lihvpaber on mõeldud kasutamiseks lihvraual mõõtmetega 98 × 140 mm. Keskmise jämedusega P80 terasuurus sobib puidu, metalli ning värvitud pindade üldiseks lihvimiseks, pindade tasandamiseks ja ettevalmistamiseks enne peenemat viimistlust. Viis tolmuärastusava võimaldavad tõhusat tolmu eemaldamist, parandades töökeskkonna puhtust ja lihvimise efektiivsust. Takjakinnitus tagab lihvpaberi kiire ning mugava vahetamise.
Jigsaw blade set, 9 TPI, HCS, T-handle, 5 pcs. 57T541 by GRAPHITE contains 5 pieces of blades with a tooth density of 9 TPI, made of tough carbon steel (HCS). Each blade features an overall length of 126mm, working length of 100mm, width of 8mm, thickness of 1.2mm and tooth spacing of 2.75mm. They are designed for basic cutting of softwood (in the 4-75 mm range), chipboard, carpenter's plywood and fibreboard. The set from the GRAPHITE brand will prove suitable for everyday jigsaw use when working with a variety of wood-based materials.
Set of drill bits for metal, wood, brick: 3, 4, 5, 6, 8, 10 mm, 18 pieces 54T430 by GRAPHITE is a set of 18 pieces of drill bits for metal, wood and brick applications. The drills are characterised by their diameters: 3, 4, 5, 6, 8 and 10 mm. They are provided with a cylindrical shank. The metal drills are additionally sharpened at 118°. This set from the GRAPHITE brand will be a good addition to any do-it-yourselfer's equipment.
Water sandpaper 230 x 280 mm, P80, 58T211 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Sanding papers 93 x 230 mm, P60, 5 pieces, without holes 58T256 by GRAPHITE are P60-graded papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures that the paper is sufficiently effective. GRAPHITE sanding papers are offered in a practical set of 5.
The 20 mm bi-metal hole saw 56T703 by GRAPHITE, with a height of 51 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 445 rpm, Inox steel - 220 rpm, aluminium - 660 rpm, wood - 520 rpm, cast iron - 290 rpm, brass - 580 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 10 TPI, HCS, 34 mm 57T507 plunge-cutting blade for the multifunction machine is a tool made of durable carbon steel (HCS), with a working width of 34 mm and 10 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 2.5 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.
GRAPHITE's 56T402 Hex 5.0 mm concrete drill bit 56T402 is a hex shank HEX drill bit with a diameter of 5 mm, an overall length of 85 mm and a working length of 37 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
