GRAPHITE's 4 mm/16 mm wood chamfer drill 54T424 is a tool characterised by a drill diameter of 4 mm, a chamfer diameter of 16 mm and an overall length of 75 mm. Equipped with a cylindrical chuck, it is recommended for drilling holes for countersunk mounting screws or for additional countersinking of holes. The GRAPHITE wood chamfer drill bit will make a good addition to any DIYer's equipment.
Bit set SL4, PH2, PZ1/2, TX20 x 100 mm, 5 pieces 56T558 by GRAPHITE consists of 5 bits: SL4, PH2, PZ1, PZ2, TX20 with a length of 100 mm. All accessories have a 1/4" Hex handle and are made from tough chrome vanadium steel (CrV) - ensuring versatility and adequate durability during use.
Jigsaw blade, 21 TPI, HCS, T-handle, 2 pieces 57T546 by GRAPHITE is a jigsaw blade with a tooth density of 21 TPI, made of HCS and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 8 mm, a thickness of 1 mm and a tooth spacing of 1.2 mm. Suitable for cutting softwood (1.5-15 mm), plywood, chipboard, carpentry plywood and fibreboard. The GRAPHITE brand blade allows for basic cutting.
The Hex chamfer, 12 mm 54T420 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
Jigsaw blade, 12 TPI, HCS, U-shaped handle, 2 pieces 57T523 by GRAPHITE is a jigsaw blade with a toothing density of 12 TPI, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 5.2 mm, a thickness of 1 mm and a tooth spacing of 2 mm. Suitable for cutting softwood (2-15 mm), plywood, chipboard, carpentry plywood and fibreboard. The GRAPHITE brand blade allows both basic cutting and curved cutting.
GRAPHITE's 5/7 mm 54T401 confirmat drill bit characterised by an overall length of 85 mm and a working part length of 55 mm. Equipped with a cylindrical handle. Designed for drilling holes for confiirmate screws. GRAPHITE brand drills are useful in the toolbox of every DIY enthusiast.
GRAPHITE's SDS Plus double helix concrete drill bit 10 x 110 mm 56T114 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10 mm and an overall length of 110 mm and a working length of 42 mm. It will prove useful for many tasks around the home and in the workshop.
Sanding grid white 115 x 280 mm, P180 58T145 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
The SDS Plus Concrete Drill with Double Spiral 8 x 110 mm 56T108 by GRAPHITE is a concrete, brick and stone drill bit with double spiral and SDS Plus chuck. It features a diameter of 8 mm and an overall length of 110 mm and a working length of 42 mm. It will prove useful for many tasks around the home and in the workshop.
Endless belts 75 x 457 mm, P80, 3 pcs. 58T362 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
Double sided bits PH2 x SL6 50 mm, 2 pieces 56T548 by GRAPHITE are 2 pieces of double sided bits, each 50 mm long. The bits have a PH2 cross profile on one side and a SL6 flat profile on the other. They are made from tough chrome vanadium (CrV) steel for durability and wear resistance. They fit ¼" chucks and are designed for use with drills and drill/drivers. Suitable for tightening and loosening screws and bolts with Phillips and flat sockets.
The 150 mm wire wheel brush, twisted steel wire, M14, 57T433 by GRAPHITE with a diameter of 150 mm is made of twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 9000 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
The SDS Plus double helix 14 x 310 mm 56T135 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 14 mm and an overall length of 310 mm and a working length of 230 mm. It will prove useful for many tasks around the home and in the workshop.
Segmented diamond cutting disc, 125 x 22.2 mm, dry 57T307 by GRAPHITE is a segmented dry cutting disc with a diameter of 125 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Sanding grid 115 x 280 mm, P100 58T153 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Wood hole saws 26 - 63 mm, h 50 mm, hardened teeth, set of 7 pieces 56T752 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 50 mm and the maximum drilling depth is 42 mm. The maximum speed is 1500 rpm. The product is fitted with hardened teeth and is designed for drilling in wood, plasterboard and plastic.
Endless belts 75 x 533 mm, P40, 3 pcs. 58T366 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
GRAPHITE's Wood Drill, Extended 10 x 400 mm 54T558 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 10 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Set of reversible bits SL6, PH1x2, PH2x3, PZ1/2/3, with magnetic holder 60 mm, 10 pcs. 56T513 by GRAPHITE consists of 10 items: nine bits of different lengths: flat SL6 (50 mm); cross bits PH1, PH2 (65 mm), PH1, PH2 (100 mm), PH2 (110 mm), PZ1, PZ2, PZ3 (65 mm) and a magnetic holder of 60 mm length. All bits are equipped with a 1/4" Hex chuck and are made from tough chrome vanadium steel (CrV) - ensuring versatility and adequate durability during use.
GRAPHITE's SDS Plus double helix concrete drill bit 10 x 260 mm 56T117 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10 mm and an overall length of 260 mm and a working length of 186 mm. It will prove useful for many tasks around the home and in the workshop.
