Flap wheel 125 x 22.2 mm, P120, zirconia 57-845 by NEO TOOLS is a 125 mm diameter, P120 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Flap wheel 115 x 22.2 mm, P80, 55-983 by NEO TOOLS is a 115 mm diameter, P80 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
PH1 x 25mm impact bits, 20 pieces 56-530 by NEO TOOLS are PH1 impact bits, 25mm in length. Supplied in a set of 20 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.
Saw blade, widia, 216 x 30 mm, 60 teeth, universal 55-547 by NEO TOOLS is equipped with 60 teeth, 2.4 mm x 1.8 mm, made of TCT carbide. The FWF tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 7,300 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting steel profiles, aluminium and other non-ferrous metals (such as copper), as well as plastics, wood with small nails, OSB, plywood, branches and laminates. The use of compensating notches reduces noise levels and the slots increase tool stability and cutting accuracy. The product from the NEO TOOLS brand ensures clean and precise work.
Diamond holesaws (6, 8, 10, 12, 16 mm), 5-piece set 55-319 by NEO TOOLS is a set of five holesaws with diameters: 6, 8, 10, 12, 16 mm, which are made of robust C45 steel. They are characterised by a maximum drilling depth of 30 mm and a speed of up to 13,300 revolutions per minute. With an M14 chuck and HV hardness of 175-200, they are versatile in use. They work best with ceramics, stoneware, concrete, clinker and stone. The D46 grit size and 10 mm diamond coating height ensure clean and precise cutting even in demanding conditions. The NEO TOOLS diamond holesaw set is recommended for professionals as well as DIY enthusiasts.
TX25 x 25 mm impact bits, 2 pieces 56-514 by NEO TOOLS type TX25 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
The SDS Plus 16 x 210 mm, quatro 54-132 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 210 mm and a working length of 140 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
NEO TOOLS diamond blade 180 x 22,2 mm, turbo wave 57-636 by NEO TOOLS of the turbo wave type with a diameter of 180 mm and a mounting hole of 22,2 mm is designed for dry and wet cutting of concrete. Equipped with a segment of 6 mm height and 2.8 mm thickness, it ensures effective surface processing. The NEO TOOLS disc meets the requirements of EN 13236 and is designed to operate at a maximum speed of 8,500 rpm and a peripheral speed of 80 m/s, making it safe for use with compatible angle grinders. The turbo wave diamond disc is distinguished by its corrugated body, which improves cooling and spoil removal during cutting. As a result, it works more stably, heats up more slowly and has a longer service life, especially when cutting concrete intensively.
Fibre abrasive discs 125 mm, P80, 3 pieces 55-857 by NEO TOOLS are 125 mm diameter and P80 gradation discs, with mounting hole: 22.2 mm. Supplied in a set of 3 pieces, they are designed for use with the 57-860 NEO TOOLS disc. The maximum speed parameters are 12,250 rpm and 80 m/s. Recommended for machining metal, wood and plastics.
Pro-Tec HSS-CNC metallipuuride komplekt sisaldab 13 kvaliteetset puuri mõõtudega 1,5–6,5 mm, pakkudes enimkasutatavaid suurusi täpseks ja efektiivseks puurimiseks metalli- ning plastmaterjalidesse. Komplekt sobib suurepäraselt nii professionaalsetele meistritele kui ka nõudlikele kodukasutajatele.
Puurid on valmistatud kvaliteetsest M2 kiirlõiketerasest (HSS) ning sügavlihvitud vastavalt DIN 338 standardile. 124° tipugeomeetria koos E-tüüpi ristterituse korrigeeringuga tagab täpse tsentreerimise, vähendab puuri libisemist ning võimaldab puhtaid ja täpseid puuravasid.
Impact bits PZ1 x 25mm, 2 pieces 56-503 by NEO TOOLS are PZ1 impact bits, 25mm in length. Supplied in a set of 2 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.
The 400 x 4 x 32 mm, 41 A24-S-BF, 57-713 metal cutting disc by NEO TOOLS is a 400 x 4 x 32 mm metal cutting disc designed for dry work. It is characterised by a maximum rotational speed of 5,100 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
Velcro sanding paper 115 x 230 mm, P180, 5 pcs, with holes 54-006 by NEO TOOLS with dimensions 115 x 230 mm. It is characterised by gradation P180 and is intended for orbital sanders (e.g. GRAPHITE 59G239 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and quick exchange. NEO TOOLS paper has 10 dust extraction holes, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.
Impact bits PH1/2/3 x 50 mm, 3 pieces 56-543 by NEO TOOLS are impact bits PH1, PH2, PH3 with a length of 50 mm. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well for professional and DIY tasks. Supplied in a set of 3.
Screwdriver bits PH2 x 25 mm, 100 pieces 56-626 by NEO TOOLS are PH type bits with a length of 25 mm. Mounted on a ¼" HEX thread. They feature high resistance to deformation and are recommended for high frequency work. The components are made from S2 steel. The NEO TOOLS bit is recommended for Phillips-type screws, it will prove useful in every professional and DIY workshop. The set contains 100 elements.
HSS-Co metal drill bit 3.5 mm, 10 pcs. 57-023-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 39 mm and its overall length is 70 mm. The maximum speeds are: INOX 1050-1150 rpm, general metals 2100-2300 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
The SDS Plus 16 x 800 mm, quatro 54-137 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 800 mm and a working length of 730 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Waterproof sanding paper 230 × 280 mm, P1200, 55-908 by NEO TOOLS is a waterproof paper, 230 × 280 mm and gradation P1200, which is designed for wet sanding. The sheet allows finishing dulling and removal of minor irregularities from the surface. Its applications include: metal, wood, plastics and glass. Sanding with water reduces clogging of the grain and promotes an even machining effect. Sanding paper by NEO TOOLS is a proven solution for many tasks.
The 150 x 20/16/12.7 x 20 mm sanding discs, 2 pieces 61-605 by NEO TOOLS, measuring 150 x 20 x 20 mm, are available in a set of 2 pieces and come with two reductions: from 20 to 16 mm and from 16 to 12.7 mm. The P60 grit allows for effective machining and smoothing of various surfaces and the maximum speed is 4,450 rpm and will work well for many tasks. NEO TOOLS discs are compatible with the GRAPHITE 59G383 bench grinder.
The 80 mm 55-328 forked hole saw by NEO TOOLS is a hole saw characterised by a diameter of 80 mm and a height of 72 mm. It offers a drilling depth of 50 mm. Equipped with an M22 thread, it provides a solid mounting. The NEO TOOLS brand hole saw is equipped with high quality carbide blades. Thanks to its strong construction and abrasion resistance, it is recommended for demanding concrete tasks.
