115 x 22.2 x 5 mm, L-segment 57H892 GRAPHITE diamond grinding disc 57H892 is a diamond blade for hard materials, especially concrete and stone. It has a diameter of 115 mm and an L-segment, which makes it more suitable for precision applications. The disc heats up slowly thanks to heat dissipation. Maximum speed is 80 m/s.
125 x 22,2 x 5 mm, heavy duty 57H896 GRAPHITE diamond grinding disc 57H896 is a diamond wheel designed for hard materials, especially concrete and stone. It has a diameter of 125 mm and the "heavy duty" designation for above-average durability. The blade heats up slowly thanks to heat dissipation. Maximum speed is 80 m/sec. Ideal for cutting and grinding.
Diamond blade 230 x 25,4 mm, solid for 59G891, 57H647 by GRAPHITE with blade diameter 230 mm and bore diameter 25,4 mm, is designed for GRAPHITE's 59G891 tile cutting machine. With its hot-pressed continuous segment, it is ideal for heavy and demanding construction work. The robust diamond segment with a height of 6 mm and a thickness of 2.4 mm makes it possible to cut ceramic components such as terracotta. The blade is recommended for wet cutting at a maximum speed of 6 600 rpm.
115 x 22.2 x 5 mm, C-segment 57H894 GRAPHITE diamond grinding disc 57H894 is a diamond blade for hard materials, especially concrete and stone. It has a diameter of 115 mm and a C-segment, which makes it more suitable for achieving fast results. The disc heats up slowly thanks to heat dissipation. Maximum speed is 80 m/sec. Ideal for cutting and grinding.
Grinding Disc 125 x 22,2 x 5 mm, L-segment 57H893 GRAPHITE is a diamond blade for hard materials, especially concrete and stone. It has a diameter of 125 mm and an L-segment, which makes it more suitable for precision applications. The disc heats up slowly thanks to heat dissipation. Maximum speed is 80 m/s. Ideal for cutting and grinding.
Diamond Grinding Wheel 125 x 22.2 x 5 mm, C-segment 57H895 GRAPHITE is a diamond blade wheel designed for hard materials, especially concrete and stone. It has a diameter of 125 mm and a C-segment, which makes it more suitable for achieving fast results. The disc heats up slowly thanks to heat dissipation. Maximum speed is 80 m/sec. Ideal for cutting and grinding.
The GRAPHITE 57T303 solid diamond cutting wheel, 180 x 25.4 mm, wet 57T303 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.2 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry 57T317 by GRAPHITE is a turbo dry cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Turbo diamond cut-off wheel, 115 x 22.2 mm, dry and wet 57T316 by GRAPHITE is a dry and wet turbo diamond cut-off wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The combination disc for 59G371, 57H696 by GRAPHITE is a disc designed for the paving machine with part number 59G371. The 150mm diameter triple set, with a 22.2mm mounting hole, is designed for grooving in concrete - no chiselling required. The cross-shaped segments create a clean 30 mm wide slot, making it easy to achieve even furrows. The GRAPHITE saw blade features 36 segments with a diamond segment height of 9.5 mm and an overall width of 27 mm, and has a maximum speed of 10,200 rpm. The product meets the requirements of EN 13236, which confirms its suitability for working with concrete.
GRAPHITE's 57T305 segmented diamond cutting wheel, 115 x 22.2 mm, dry 57T305 is a segmented dry cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Segmented diamond cutting disc, 115 x 22.2 mm, dry and wet 57T306 by GRAPHITE is a segmented dry and wet cutting disc with a diameter of 115 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Turbo diamond cutting wheel, 230 x 22.2 mm, dry 57T320 by GRAPHITE is a turbo dry cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.8 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Segmented diamond cutting wheel, 180 x 22.2 mm, dry 57T310 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
GRAPHITE's 57T323 diamond grinding wheel, 2 segments, 115 x 22.2 mm, dry 57T323 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 4.5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 13 600 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
GRAPHITE's 57T325 diamond grinding wheel, 2 segments, 180 x 22.2 mm, dry 57T325 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 8 600 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling during operation and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry and wet 57T318 by GRAPHITE is a dry and wet turbo diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The GRAPHITE 57T302 solid diamond cutting wheel, 180 x 22.2 mm, wet 57T302 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Segmented diamond cutting wheel, 230 x 22.2 mm, dry and wet 57T314 by GRAPHITE is a segmented dry and wet cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
The GRAPHITE 57T301 solid diamond cutting wheel, 125 x 22.2 mm, wet 57T301 is a solid diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
