UUED TOOTED

• Stable and robust construction
• Simple and easy operation
• Two cutting speeds
• Machine head, vertically guided, with dovetail guide and adjustable wedge strip, 45 ° to the left and 60 ° to the right, with locking at 45 °, 0 °, -45 °, -60 °
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear quietly running in oil bath
• Coolant pump with coolant filter
• Coolant jet distribution for better lubrication of the saw blade
• Transversely displaceable pneumatic quick-action vise with Antrigratvorrichtung
• Chipbreaker for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

• Closing the vice and activating the motor
• Lowering the saw head to cut
• Stopping the engine and returning the saw head to its original position
• Opening the vise

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Ideal for on the way to assembly etc.
• Easy installation on standard vices
• Cold bending up to an angle of 180 °
• also possible are partial bends
• Adjustable bending angle stop for high repeat accuracy
• Easiest operation

• inner support cast iron cast iron
• Positioning cube prevents twisting of the workpiece
• hardened bolts
• Easy attachment in standard vices

• NC control for setting the bending angle
• Up to 50 programs can be stored
• Purely motorized drive
• Automatically returns to the starting position

• NC control for setting the bending angle
• Up to 50 programs can be stored
• High-quality, robust design
• Fast tool change
• Purely motorized drive
• Automatically returns to the starting position

Tehnilised andmed:

• Mootori võimsus: 1,1 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori pöörlemiskiirus: 1450 p/min
• Lihvketta läbimõõt: 305 mm
• Lihvimisüksuse kallutusvahemik: 0-45°
• Töölaua mõõtmed: 440 × 210 mm
• Nurgajuhiku reguleerimisvahemik: 180°
• Tolmuärastusava läbimõõt: 50 mm
• Mõõtmed (P × L × K): 560 × 440 × 380 mm
• Netokaal: 24,9 kg
• Brutokaal: 31,4 kg

KE 6-2 servafaasimismasin metalli servade faasimiseks ja kraatide eemaldamiseks. Tagab puhta töötlemistulemuse ning aitab ette valmistada detaile keevitamiseks ja viimistlemiseks. 

Komplekti sisu:

• Servafaasimismasin KE 6-2
• Standardne lõikepea
• Kasutamiseks vajalikud põhikomponendid
• Kasutusjuhend

Tehnilised andmed:

• Maksimaalne töölaius: 2020 mm
• Maksimaalne lehe paksus terase puhul (400 N/mm²): 2,0 mm
• Maksimaalne lehe paksus roostevaba terase puhul: 1,25 mm
• Maksimaalne lehe paksus alumiiniumi puhul: 2,4 mm
• Maksimaalne painutusnurk: 135°
• Maksimaalne avaus ülemise ja alumise tala vahel: 120 mm
• Segmentide mõõdud: 25, 30, 35, 40, 45, 75, 100, 150, 200, 200, 270, 400 ja 400 mm
• Mõõdud (P × L × K): 2500 × 710 × 1500 mm
• Netokaal: 1020 kg
• Brutokaal: 1180 kg
• Tugev ja kompaktne keevitatud konstruktsioon
• Segmenteeritud ülemised tööriistad keerukamate detailide valmistamiseks
• Kindel detaili kinnitamine ülemise tala eelpingestamisega
• Painutusnurga täpne seadistamine skaala ja reguleeritava piirikuga
• Vähe hooldust nõudev konstruktsioon
• Roostevaba terase painutamisel tuleb kasutada karastatud ülemisi tööriistu

• Fire retardant
• Made from polyether-based polyurethane
• Surface: studded
• Underside: studded, for maximum standing comfort and slip resistance
• Ergonomic floor covering for standing workstations
• Oil and petrol resistant
• 5-year guarantee

• Motorised height adjustment of the work table via joystick with digital display
• Conveyor table with profile conveyor belt for optimum hold during processing

• Well suited for grinding flat series components, e.g. after laser cutting or punching
• Motorized height adjustment of the work table via joystick with digital display
• Conveyor table with profile conveyor belt for optimum hold during processing

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe

• Heavy welded steel construction
• Horizontal and vertical work possibility
• All three rollers driven by hydraulic motor and planetary gear
• Rolls are hardened
• Hydraulic delivery via two lower rollers
• Lateral mechanical straightening rollers, infinitely adjustable
• Separate control panel with foot control and 2 digital displays

• Hydraulic straightening rollers
• Stepless adjustable rolling speed
• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials
• NC control

• Please specify when ordering material to be edited!

• Bending rollers on request

• Optionally, the machine can be equipped with bending rollers especially for their needs
• Also atypical sizes can be made on request

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 16 mm
• Pidev puurimisvõimsus terases (S235JR): 14 mm
• Mootori võimsus: 0,45 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Kiiruste arv: 12
• Pöörlemiskiirus: 250–2400 p/min
• Spindli koonus: MK2
• Spindli käik: 60 mm
• Väljaulatus: 128 mm
• Spindli viskumistäpsus: ≤ 0,02 mm
• Töölaua mõõtmed: 200 × 200 mm
• T-soonte arv: 2
• T-soonte mõõt: 16 mm
• Töölaua pööramine: 360°
• Töölaua kallutus: ±45°
• Maksimaalne kaugus spindlist töölauani: 410 mm
• Alusplaadi tööpind: 355 × 235 mm
• Maksimaalne kaugus spindlist alusplaadini: 530 mm
• Sambadiameeter: 60 mm
• Mõõtmed (P × L × K): 665 × 430 × 255 mm
• Netokaal: 28 kg
• Brutokaal: 30,2 kg

Komplektis kiirkinnitusega puurpadrun.