UUED TOOTED

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick clamping system enables fast sanding belt changes
• Integrated extraction system in the base with polyester filter pockets
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

Tehnilised andmed:

• Juhtsüsteem: Mitsubishi FX5, 7" puuteekraan.
• Mootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus: 15-150 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi mõõtmed: 6200 × 41 × 1,3 mm.
• Saelindi kaldenurk: 7°.
• Maksimaalne lõikevõime ümarmaterjalile: Ø 550 mm.
• Maksimaalne lõikevõime ristkülikprofiilile: 550 × 500 mm.
• Maksimaalne lõikevõime torukimpudele: 550 × 460 mm.
• Materjalietteande kiirus: 5 m/min.
• Maksimaalne materjalietteanne ühe tsükliga: 750 mm.
• Maksimaalne materjalietteanne: 9999 mm.
• Minimaalne materjalietteanne: 3 mm.
• Minimaalne lõikepikkus: 15 mm.
• Minimaalne materjali läbimõõt: 10 mm.
• Minimaalne jääkpikkus: 40 mm.
• Töölaua kõrgus: 800 mm.
• Mõõtmed (P × L × K): 4300 × 2030 × 2550 mm.
• Kaal: 3945 kg.

Komplekti kuulub:

• Mitsubishi FX5 juhtsüsteem koos 7" puuteekraaniga.
• Automaatne materjalietteanne 700 mm.
• Hüdrauliline kaheosaline kruustang.
• Elektriline laastutransportöör.
• Laastukonteiner.
• LED-töövalgustus.
• Emulsioonjahutussüsteem

• Release up to three different pipe diameters (MRA 2)
• Can be used both horizontally and vertically
• Low effort

Tehnilised andmed:

• Magnetlaua mõõdud: 500 × 250 mm
• Maksimaalne töödeldava detaili kaal: 250 kg
• X-telje käik: 550 mm
• Z-telje käik: 270 mm
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Lihvketta mõõdud: Ø 205 × 19 × 31,75 mm
• Spindli kiirus: 2900 p/min
• Spindlimootori võimsus: 1,5 kW
• Hüdraulikapumba võimsus: 0,75 kW
• Koguvõimsus: 4,4 kW
• Toide: 400 V / 50 Hz / 3~
• Mõõtmed (P × L × K): 2680 × 2350 × 2460 mm
• Netokaal: 2000 kg
• Transpordikaal: 2400 kg
• Spindli jooksutäpsus: 0,002 mm
• Juhtimine: NC G1 juhtsüsteem Y- ja Z-teljele
• Lihvimisrežiimid: tasapinnalihvimine, süvislihvimine, ristlihvimine

Komplekti sisu:

• Täppistasapinnalihvpink FSM 2550 PRO
• Elektromagnetiline peenpooluseline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutussüsteem magnetseparaatoriga
• NC-juhitav paralleelne tasandus- ja kompensatsiooniseade laua kohal
• Automaatne hüdrauliline X-telje etteanne
• Servoajamiga Y- ja Z-telje etteanded
• Elektrooniline käsiratas Y- ja Z-telje jaoks
• Automaatne tsentraalmäärimissüsteem
• LED-töövalgusti
• Tööala osaline kapseldus turvauksega
• Tasakaalustusseade
• Kasutusjuhend

HMBS 440 CNC CALIBER on täisautomaatne kahetulbaline CNC-metallilintsaag seeriatootmiseks, mis sobib täismaterjali ja profiilide lõikamiseks. Mitsubishi FX5 juhtsüsteem, automaatne materjalietteanne ning BRP lõikeetteande juhtimine tagavad suure tootlikkuse, täpse lõiketulemuse ja pika saelindi kasutusea.

Tehnilised andmed:

• Lõikevõime 0° ümarmaterjal (täismaterjal): 440 mm.
• Lõikevõime 0° ristkülikprofiil: 460 × 400 mm.
• Kimpmaterjali lõikevõime: 460 × 400 mm.
• Mootori võimsus: 4,0 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus: 15–150 m/min.
• Saelindi mõõtmed: 5360 × 34 × 1,1 mm.
• Saelindi kaldenurk: 7°.
• Materjalietteande kiirus: 5 m/min.
• Maksimaalne etteanne ühe tsükliga: 715 mm.
• Maksimaalne materjalietteanne: 9999 mm.
• Minimaalne etteanne: 3 mm.
• Minimaalne lõikepikkus: 10 mm.
• Minimaalne materjali läbimõõt: 10 mm.
• Minimaalne jääkpikkus: 30 mm.
• Automaatrežiimis minimaalne jääkpikkus: 200 mm.
• Töölaua kõrgus: 800 mm.
• Mõõtmed (P × L × K): 3875 × 1950 × 2190 mm.
• Kaal: 2785 kg.

Komplekti kuulub:

• Mitsubishi FX5 juhtsüsteem 7" puuteekraaniga.
• 700 mm etteanderullikute süsteem.
• Jahutuspump.
• Hüdrauliline saelindi pingutussüsteem.
• LED-töövalgustus.
• Elektriline laastueemaldushari.
• Laastukonveier.
• Laastukonteiner.

• Revolutionary simple, very fast and comfortable operation
• Compact and space-saving
• With practical shelves for all individual segments and bending rails
• Ideal for bending aluminum, copper, steel, stainless steel, etc.
• Precise bend angle adjustment up to 170 °
• Powerful electromagnetic system for optimum bending results
• The clamping across the entire width guarantees a clean bend
• Very high bending capacity
• The main pressure is on the upper cheek, not on the machine
• The unique centerless hinges ensure precise power transmission at the bending point
• Backgauge, segmented upper jaw and foot pedal are standard

With practical shelves for all individual segments and bending rails

Extremely fast and easy operation - in just a few steps you can turn your sheets into the desired shape without great effort

Step 1:

• Place the workpiece on the magnetic conductors and adjust using the bending edge

Step 2:

• Choose the right bending segment, place it on the workpiece and activate the magnet

Step 3:

• At the bend stop you can set the exact bending angle. Perform the bending process

The conversion for further bending operations is done in a few steps.

Note: Do not use the machine with pacemakers

Tehnilised andmed:

• Magnetlaua mõõdud: 800 × 400 mm
• Maksimaalne töödeldava detaili kaal: 400 kg
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Lihvketta mõõdud: Ø 405 × 50 × 127 mm
• Spindli kiirus: 1450 p/min
• Peamootori võimsus: 3,75 kW
• Hüdraulikapumba võimsus: 1,5 kW
• Toide: 400 V / 50 Hz / 3~
• Mõõtmed (P × L × K): 3645 × 2305 × 1900 mm
• Netokaal: 3250 kg
• Transpordikaal: 3500 kg
• Vertikaalsööte minimaalne samm: kuni 0,001 mm
• Juhtsüsteem: AD5 automaatne söötmise juhtimine puuteekraani kaudu
• Ekraani suurus: 7 tolli

Komplekti sisu:

• Täppistasapinnalihvpink FSM 4080 DT
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Automaatne ristietteanne
• Jahutussüsteem
• Keskmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Pritsmekaitsed ees, külgedel ja taga
• Tasandusjalad
• Kasutusjuhend

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• For precision surface grinding in the industrial sector
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

• With sprung material stop arm
• Adjustable to 0 point
• Manually fold away to the rear
• With an eccentric lever for
• Exemption equipped

• Fire retardant
• Made from polyether-based polyurethane
• Surface: studded
• Underside: studded, for maximum standing comfort and slip resistance
• Ergonomic floor covering for standing workstations
• Oil and petrol resistant
• 5-year guarantee

• With brushless motor - particularly efficient, durable and maintenance-free
• Four speeds selectable at the touch of a button
• Motor with soft start
• Digital display showing the selected speed and current power in W
• Angle adjustment 0° - 45° for mitre cuts
• Vice with quick adjustment
• Large LED work light on the underside of the handle to illuminate the work area

• With brushless motor - particularly efficient, durable and maintenance-free
• For low-burr sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant
• Application e.g. in metal construction, joineries, interior fitters etc.
• Easy to transport
• Four speeds selectable at the touch of a button
• Motor with soft start
• Digital display showing the selected speed and current power in watts
• Angle adjustment 0° - 45° for mitre cuts
• Vice with quick adjustment
• Large LED work light on the underside of the handle to illuminate the work area
• With spindle lock for quick saw blade changes
• Compatible with the MUG 1 machine base (3630000)

MBS 150 on professionaalne metalli lintsaag torude, profiilide ja täismaterjali lõikamiseks. Reguleeritav lõikenurk, hüdrauliline saeraami langetamine ja tugev konstruktsioon tagavad täpse ning efektiivse töö.

Tehnilised andmed:

• Tüüp: metalli lintsaag
• Toitepinge: 230 V
• Mootori võimsus: 1,1 kW
• Saelindi mõõtmed: 1735 × 13 × 0,65 mm
• Saelindi kiirus: 20 / 29 / 50 m/min
• Lõikenurk: 0° kuni +45°
• Hüdrauliliselt reguleeritav saeraami langetus
• Automaatne väljalülitus pärast lõike lõpetamist
• Kiirkinnitusega kruustang
• Lõikevõime 90° ümartoru: 150 mm
• Lõikevõime 90° ristkülikprofiil: 150 × 140 mm
• Lõikevõime 90° nelikantprofiil: 145 × 145 mm
• Lõikevõime 45° ümartoru: 90 mm
• Lõikevõime 45° ristkülikprofiil: 90 × 100 mm
• Lõikevõime 45° nelikantprofiil: 90 × 90 mm
• Mõõdud (P × L × K): 1000 × 730 × 1230 mm
• Netokaal: 78 kg

Komplekti sisu:

• Metallkraft MBS 150 lintsaag
• Bimetall-saelint
• Kiirkinnitusega kruustang
• Hüdrauliline langetussüsteem
• Alusraam
• Kasutusjuhend

• Rolls made of steel
• Swing-out top roller for easier removal of the workpiece
• Asymmetric roller arrangement for easy pre-bending
• Tiltable side roller for conical bending
• Clamping and side roller with wire insert groove
• Roller drive via hand crank and gearbox
• Particularly handy and therefore suitable for work in confined spaces
• Due to the low wave strength optimally suitable for filigree applications
• 3-roll bending machine for the production of all round shaped parts such as pipes, cylinders, etc.
• Simple and solid construction

• Lubrication possible via grease nipple (RBM 305)
• The upper roller is adjustable, thus easy removal of the finished workpiece
• Rear roller individually adjustable, thus also conical work possible
• Settings based on comfortable large-sized roller set screws

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe