UUED TOOTED

Metal drills GRAPHITE (ref. no. 57H040-10) with diameters 6.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

Light, handy and ergonomic TOPEX blade holder (ref. no. 10A216), compatible with blade lengths 250–300 mm. TOPEX brand is oriented towards DIY enthusiasts.

The 3-in-1 jacket with 10000 PREMIUM NEO membrane is windproof and waterproof for outdoor work. Practical for all conditions, as it consists of two parts that can be worn separately or combined: fleece and windbreaker. The fleece can be used as a sweatshirt on colder days. The hooded windbreaker is the ideal jacket for rainy and windy weather. The windcheater with hood is the ideal jacket for rainy and windy weather, while the fleece can be attached to form a warm protective jacket useful at work or during trips. In addition, the jacket is equipped with a comfortable hood with regulation and a silicon patch at the sleeve, which makes it possible to adjust the width of the cuff. Reflective elements of the jacket ensure good visibility and safety at any time of day and in various weather conditions. The product is CE certified to EN ISO 13688:2013 and available in sizes S-XXXL.

VERTO bimetal hole cutter diameter 22 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.

Metal drills GRAPHITE (ref. no. 57H024-10) with diameters 4.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

VERTO bimetal hole cutter diameter 19 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.

GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.

Masonry drill VERTO (ref. no. 60H641) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

GRAPHITE WIDIA Saw and Plunge Blade (Ref. 55H687) 165mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB geometry (alternate) allow precise cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.

Masonry drill VERTO (ref no. 60H190) with 6.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

Võrklihvketastel on väga hea tolmueemaldus, sest tolm liigub läbi võrgu, mitte ei ummista pinda. Vähem lenduvat tolmu ja parem nähtavus lihvimisel.

NEO work gloves provide protection for your hands against dirt, scratches and harmful conditions during work. Made of latex coated nylon. They ensure comfort during use, allowing for a firm grip, even of small objects, while preventing the tools from slipping from your hands. CE marking is a safety guarantee proving that the product meets all EU requirements. Available in sizes: 8", 9", 10".

GRAPHITE continuous diamond disc thanks to hot pressed continuous segment is perfect for heavy duty construction tasks. Highly resistant diamond segment allows for efficient cutting ceramic pieces, like terracotta, gres, granite, marble.

GRAPHITE Turbo wave diamond disc thanks to hot pressed Turbo type segments is perfect for heavy duty construction tasks. Special profile of disc considerably improves cooling during operation for longer service life. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.

NEO PREMIUM short shorts (ref. 81-276-M) are useful when working in higher temperatures. Made of high quality material with added elastane. Multifunctional pockets will store all necessary tools. An additional, detachable pocket with tool holders allows you to store even more tools. A belt is attached to the trousers. The CE mark is a guarantee of safety, proving that the product meets all EU requirements. Available in sizes XS-XXXL. The NEO brand meets professionals' expectations.

Metal drills GRAPHITE (ref. no. 57H026-10) with diameters 4.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

Sanding cloth GRAPHITE (ref. no. 55H876) in a sheet with dimensions 230 x 280 mm and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.