UUED TOOTED

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• various roller versions available
• Roller support infinitely height adjustable
• extra wide edition
• universally applicable

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Fold-away protective screen
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy belt tracking adjustment via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

Tehnilised andmed:

• Maksimaalne töölaius: 2520 mm
• Maksimaalne ava ülemise ja alumise tala vahel: 90 mm
• Segmentide mõõdud: 25 / 30 / 35 / 40 / 45 / 50 / 75 / 100 / 150 / 220 / 250 / 500 / 500 mm
• Painutusvõime terasel (400 N/mm²): 3,5 mm
• Painutusvõime terasel (700 N/mm²): 2,6 mm
• Painutusvõime alumiiniumil: 4,2 mm
• Kinnitustala mootori võimsus: 1,1 kW
• Painutustala mootori võimsus: 4,0 kW
• Pikkus: 3620 mm
• Laius: 1100 mm
• Kõrgus: 1560 mm
• Kaal: 4500 kg

Komplekti sisu:

• PT 1 juhtsüsteem painutusnurga seadistamiseks
• Kõrged segmenteeritud kitsejala-tüüpi tööriistad (SH)
• Jalglüliti hädaseiskamisfunktsiooniga
• Integreeritud painutustala peenseadistus skaalaga
• Kasutusvalmis motoriseeritud painutuspink

• Powerful and low-noise drive via LENZE gear motors with brake
• Compact, heavy-duty, stress-free welded steel design
• Acute bending rail made of tool steel C50 at the clamping beam
• Continuous, replaceable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Clamping beam pressure controlled automatically via motor current absorption
• Clamping beam driven via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine’s front side (right)
• Manual granular adjustment of the bending beam with help of a scale
• Manual crowning via pressure screws in the bending beam
• Remote foot switch with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components by Schneider or Omron
• SH-models with high, segmented crowbar tools
• Stock equipment as standard with: hardened tools, control PT 1, back gauge 6-760mm with hand wheel, measuring device and stop fingers, quick clamping for top tool
• Quality Made in Europe
• Available on request: Models in DUO design featuring full-width acute bending rail and segmented crowbar tools

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 20 mm.
• Pidev puurimisvõimsus terases (S235JR): 16 mm.
• Maksimaalne freespea läbimõõt: 52 mm.
• Maksimaalne otsfreesi läbimõõt: 12 mm.
• Mootori võimsus: 0,95 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 90-3000 p/min.
• Kiiruste arv: 2 käiguastet, elektrooniline kiiruse reguleerimine.
• Tööriistahoidik: BT20.
• Spindli käik: 40 mm.
• Spindli väljaulatus: 170 mm.
• Laua mõõtmed: 700 × 180 mm.
• T-soonte mõõt: 12 mm.
• T-soonte arv: 3.
• T-soonte vahe: 63 mm.
• Laua kandevõime: 50 kg.
• X-telje käik: 480 mm.
• Y-telje käik: 175 mm.
• Z-telje käik: 270 mm.
• Maksimaalne kaugus spindlist lauani: 360 mm.
• Freesipea kallutus: ±60°.
• Mõõtmed (P × L × K): 745 × 650 × 950 mm.
• Kaal: 120 kg.

Komplekti kuulub:

• Kasutustööriistad.

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Mootori võimsus: 0,5 kW
• Toitepinge: 230 V
• Sagedus: 50 Hz
• Lihvketta läbimõõt: 200 mm
• Lihvketta laius: 20 mm
• Võlli läbimõõt: 16 mm
• Pöörlemiskiirus: 2980 p/min
• Kaal: 9,5 kg

Komplekti kuulub:

• Lihvketas K36
• Lihvketas K60

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 34 mm.
• Pidev puurimisvõimsus terases (S235JR): 26 mm.
• Mootori võimsus: 1,5 / 2,2 kW.
• Toitepinge: 400 V / 50 Hz.
• Pöörlemiskiirus: 145-4800 p/min.
• Kiiruste arv: 2 × 9 astet.
• Spindli koonus: MK4.
• Spindli käik: 160 mm.
• Väljaulatus: 285 mm.
• Töölaua mõõtmed: 420 × 400 mm.
• T-soonte mõõt: 14 mm.
• Maksimaalne kaugus spindlist töölauani: 790 mm.
• Maksimaalne kaugus spindlist alusplaadini: 1275 mm.
• Kolonni läbimõõt: 115 mm.
• Mõõtmed (P × L × K): 918 × 585 × 1895 mm.
• Kaal: 274 kg.

Komplekti kuulub:

• Võtmeta puuripadrun 1-16 mm
• MK4/B16 koonusadapter
• T-soonemutrid
• Masinakruustang BSI 140

• For use in industry and trade
• Heavy and stable cast iron construction
• Asymmetrical 3-roller system
• Upper roller swung out, thereby easy removal of the finished workpiece
• Easily adjustable upper and lower roller
• The foot control leaves both hands free for the material supply
• User-friendly
• Powerful 400 volt engine
• Optionally available: hardened rollers

• When ordering, please specify the type of material to be processed!
• All accessories only possible ex works.

Tehnilised andmed:

• Mootori võimsus: 0,15 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Pöörlemiskiirus: 2980 p/min
• Lihvketta läbimõõt: 125 mm
• Lihvketta laius: 16 mm
• Võlli (ava) läbimõõt: 12,7 mm
• Netokaal: 4,3 kg
• Brutokaal: 5,2 kg

Komplekti kuulub:

• Lihvketas K36
• Lihvketas K60

MKS 350 V on professionaalne vertikaalne metalliketassaag kahe lõikekiiruse, kuni 60° pöördenurga ja suure lõikevõimega. Sobib terase, torude ja profiilmaterjalide täpseks töötlemiseks tööstuses ning metallitöökodades. 

Tehnilised andmed:

• Tüüp: manuaalne vertikaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,9 / 2,5 kW
• Saeketta läbimõõt: 370 mm
• Saeketta pöörlemiskiirused: 36 / 72 p/min
• Lõikenurk: -45° kuni +60°
• Vertikaalselt juhitud saepea pääsusaba-juhiku ja reguleeritava kiillatiga
• Reguleeritav sügavuspiirik saepea vertikaalse käigu jaoks
• Ristisuunas liigutatav kruustang kraadivastase seadmega
• Kahe lõikekiirusega ajam
• Õlivannis töötav reduktor
• Jahutuspump koos jahutusvedeliku filtriga
• Jahutusvedeliku suunaja saeketta paremaks määrimiseks
• Laastumurdja saeketta puhastamiseks
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1050 × 1000 × 1850 mm
• Netokaal: 450 kg
• Brutokaal: 450 kg

Lõikevõime:

• Ümartäismaterjal 0°: 100 mm
• Ümartoru 0°: 100 mm
• Nelikanttoru 0° 90 × 90 mm
• Ristküliktoru 0°: 170 × 90 mm
• Ümartäismaterjal -45°: 100 mm
• Ümartoru -45°: 100 mm
• Nelikanttoru -45°: 90 × 90 mm
• Ristküliktoru -45°: 125 × 90 mm
• Ümartäismaterjal +45°: 90 mm
• Ümartoru +45°: 90 mm
• Nelikanttoru +45°: 90 × 90 mm
• Ristküliktoru +45°: 90 × 90 mm

Komplekti sisu:

• Metallketassaag Metallkraft MKS 350 V
• Jahutusseade koos filtrga
• Materjalitugi rullikuga
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Laastueemaldi T4

• Saeketas ei kuulu komplekti

• Stable and robust construction
• Two cutting speeds as standard
• Pivoting machine head at 45 ° to the left and 90 ° to the right
• Reduction gear running in oil bath
• With membrane coolant pump with filter
• Double vice with counter vise and Antigratspannbacken guarantees a precise and burr-free cut
• Vise longitudinally displaceable and thus suitable for Längsschnitteund slitting
• Quick-action vise swivels 45 ° to the left and 45 ° to the right
• Movable guard ensures optimum safety when cutting
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Control handle with safety switch
• Quality Made in Europe

• Activation of the engine and closing of the vice
• Lowering the saw head to cut
• Return the saw head to home position and stop the motor
• Opening the vise

• Suitable for cutting steel and non-ferrous metals
• Heavy, stress-free welded steel construction
• High quality knife
• Sheet metal support arms for large workpieces
• Cut line illumination and long holes in the upper cover plate for an optimal view of the cutting edge for cutting on scratches
• Manual back gauge 630 mm with millimeter precision adjustment
• Photocell for the backgauge area
• The foot control leaves both hands free for the material supply

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Metallkraft AKM 200-4 H hüdrauliline väljalõikepink kiireks lehtmetalli ristkülikukujuliseks väljalõikamiseks. Lõikepaksus kuni 4 mm, lõikeala 197 × 197 mm, 14,7 t lõikejõud ja jalapedaaliga juhtimine. Sobib professionaalseks metallitööks.

Tehnilised andmed:

• Lõikenurk: 90°
• Maksimaalne lõikepaksus (400 N/mm²): 4 mm
• Maksimaalne lõikepaksus (600 N/mm²): 2 mm
• Lõikejõud: 14,7 t
• Lõikepikkus: 197 mm
• Lõikelaius: 197 mm
• Löökide arv: 20 lööki/min
• Mootori võimsus: 3 kW
• Toitepinge: 400 V
• Sagedus: 50 Hz
• Töörõhk: 120 bar
• Õlipaagi maht: 45 l
• Töölaua kõrgus: 950 mm
• Töölaua pikkus: 690 mm
• Töölaua laius: 700 mm
• Masina mõõdud (P × L × K): 890 × 780 × 1170 mm
• Netokaal: 548 kg

Komplekti sisu:

• Hüdrauliline väljalõikepink Metallkraft AKM 200-4 H
• Alumine terakomplekt terasele ja roostevabale terasele
• Ülemine terakomplekt terasele ja roostevabale terasele
• Jalapedaal
• Kasutusjuhend

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened