UUED TOOTED

• Best power transmission through aluminum pulleys
• Emergency stop impact switch
• Drill spindle with precision ball bearings
• Guaranteed concentricity accuracy less than 0.03 mm measured at the drilling spindle
• Dirt and water resistant, easy to clean membrane keyboard with high-contrast OLED display
• Glare-free LED lighting integrated on the left and right in the drill head. No disturbing shadows
• Threading mode
• Language selection in the display field optionally DE-EN-FR-RU
• Digital reference point
• Digital parts counter
• Acoustic signal when reaching the drilling depth
• Reduced speed in tapping mode
• Height-adjustable feed guard with microswitch for maximum protection
• Precision machined drill table with parallel T-slots, precision surface finish
• Turnable drill table
• Solid base plate with parallel T-slots

When drilling and tapping, the machine automatically sets the optimal speed for the tool, after specifying the diameter and material.

• Siemens SINAMICS V20 inverter

• heavy welded steel construction
• horizontal and vertical work possibility
• lower rollers driven by a motor
• Rolls are hardened
• Steel shafts, hardened and ground
• Delivery via upper roller
• lateral straightening rollers, infinitely adjustable
• powerful 400 volt engine
• Left / right rotation by foot pedal

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• For pressing out and pressing in bearings, bolts and bushings as well as for repair and assembly work, press work, load tests, weld test tests and much more
• With pressure mandrel adapter for two different pressing diameters of the cylinders
• Hydraulic control of the stroke and the right / left movement of the cylinder and the height adjustment of the table
• Cylinder can be moved laterally via lever
• Pressure-sensitive hand levers for regulating the feed rates
• Pressing pressure readable via manometer

• For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector
• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper
• With electric table height adjustment
• With split table that can be opened, drawer sanding unit and integrated work table lighting
• Smooth-running sanding table even under load
• Easy adjustment of the sanding belt
• Profile roller sanding pad, resulting in less tarnishing during the sanding process
• Right/left rotation as standard

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick clamping system enables fast sanding belt changes
• Integrated extraction system in the base with polyester filter pockets
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Heavy industrial version
• Quiet running
• Manual or semi-automatic operation
• Steplessly adjustable saw blade speed from 20-80 m/min
• High cutting accuracy due to vibration-free running
• Mitration adjustment -45° to 60° by swivelling the entire saw bow
• Standard with high quality bi-metall saw band
• Microswitch for automatic limit switch
• Coolant pump
• Ball bearing saw band guide with carbide plates for optimum cutting results
• Easy adjustment of the lowering speed by means of feed control valve in the control panel
• Large dimensioned, hydraulic quick-clamping vice, self-closing, laterally adjustable
• Manometer for correct saw blade tension
• Clear control panel

• closing the vice and activating the motor
• lowering the saw bow for cutting
• stopping the motor and returning the saw bow to the starting position

ULMS 600 on professionaalne alusraami sisse ehitatud ketassaag alumiiniumi, värviliste metallide ja suuremõõtmeliste profiilide täpseks lõikamiseks. 600 mm saeketas tagab suure lõikevõime ning kõrge tootlikkuse.

Tehnilised andmed:

• Tüüp: alusraami sisse ehitatud kergmetallide ketassaag
• Kasutusala: alumiinium, värvilised metallid ja profiilmaterjalid
• Saeketta läbimõõt: 600 mm
• Paigaldusviis: tööpinna alla integreeritud
• Sobib suuremõõtmeliste profiilide töötlemiseks
• Sobib tööstuslikuks ja seeriatootmise kasutuseks
• Tugev tööstuslik konstruktsioon
• Professionaalseks kasutamiseks

Komplekti sisu:

• Metallkraft ULMS 600 kergmetallide ketassaag
• Materjali tugisüsteem
• Kaitsekate
• Kasutustööriistad
• Kasutusjuhend

FSM 4080 PRO on professionaalne CNC-juhtimisega täppispinnalihvmasin tasapinna-, süvis- ja ristlihvimiseks. Tugev malmkonstruktsioon, kõrge täpsusega NSK P4 klassi spindlilaagrid ning automaatsed servoajamitega teljed võimaldavad töödelda ka raskeid detaile suure täpsuse ja stabiilsusega.

Tehnilised andmed:

• Magnetlaua mõõtmed: 800 × 400 mm
• Maksimaalne detaili kaal: 400 kg
• Maksimaalne kaugus spindli ja laua vahel: 550 mm
• X-telje käik: 860 mm
• Z-telje käik: 450 mm
• X-telje etteandekiirus: 5–25 m/min
• Spindli jooksutäpsus: 0,002 mm
• Spindli mootori võimsus: 3,75 kW
• Hüdraulikapumba võimsus: 1,5 kW
• Spindli pöörlemiskiirus: 1450 p/min
• Kiiruse reguleerimine: astmeteta (inverterjuhtimine)
• Lihvketta mõõtmed: Ø 405 × 50 × 127 mm
• Koguvõimsus: 8 kW
• Toitepinge: 400 V / 50 Hz
• Juhtsüsteem: 10" puutetundlik NC-juhtimine G1 (Y- ja Z-telg)
• Masina mõõtmed (P × L × K): 3600 × 2650 × 2560 mm
• Kaal: 3700 kg

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Wired remote control for starting the machine and lowering the saw arm
• Saw arm tilted by 25°, thus extending the service life of the saw blade
• Saw arm can be tilted from +60° to -45
• Saw blade drive via low-maintenance, oil-lubricated worm gearbox
• Robust three-phase motor equipped with overload protection
• Bearing-mounted turntable
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Vice with manual quick-clamping device for the material and quick-clamping device for lateral adjustment of the vice
• Swivel-mounted control panel
• With belt tension monitoring
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system

• Foot control allows sheet positioning with both hands
• Workpiece clamping and bending are motorized via a chain drive
• Setting the bending angle manually, reading the angle on a scale ring
• Many bending options with segmented upper beam
• Accurate movement of the bending beam over large-dimensioned flat guides
• Heavy, robust welded construction

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

MKS 351 metallilõike ketassaag koos alusraami ja HSS-saekettaga. Kahe kiirusega 350 mm ketassaag, pööratav lõikenurk ±45°, 400 V toide ning täpne ja puhas lõige terase ning roostevaba terase töötlemiseks.

Tehnilised andmed:

• Toitepinge: 400 V / 50 Hz
• Mootori võimsus: 1,5 / 2,2 kW
• Saeketta läbimõõt: 350 mm
• Saeketta kiirused: 20 / 40 p/min
• Lõikenurga reguleerimine: -45° kuni +45°
• Jahutussüsteem: membraanpump filtriga
• Mõõtmed (P × L × K): 1000 × 1200 × 1475 mm
• Kaal: umbes 210 kg

Lõikevõime 0°

• Täismaterjal ümar: Ø60 mm
• Toru ümar: Ø110 mm
• Nelikanttoru: 100 × 100 mm
• Ristküliktoru: 120 × 80 mm

Lõikevõime ±45°

• Täismaterjal ümar: Ø55 mm
• Toru ümar: Ø80 mm
• Nelikanttoru: 80 × 80 mm
• Ristküliktoru: 80 × 80 mm

Komplekti sisu:

• MKS 351 metallilõike ketassaag
• Alusraam (substructure)
• HSS-E saeketas Ø350 × 2,5 × 32 mm
• Jahutussüsteem
• Pikkuspiirik 500 mm
• Kasutustööriistad ja dokumentatsioon

• Heavy welded steel construction
• top and clamping roller driven
• Swing-out top roller
• Manual adjustment of the clamping and side roller
• Roller drive via powerful electric motor and gearbox
• Wire grooves on the clamping roller
• Safety device emergency stop line
• With mobile control panel and foot pedal
• Note: Please specify the type of material to be processed when ordering!
• Note: Other models on request

• Swing-out top roller
• Control panel with digital display and manual operation (optional)
• RBM 2050-30 E PRO with optional motorized infeed of the side roller and digital display for side roller

• Swivel range of ± 45 °
• Easy-to-read angle scale enables precise work
• Seconds adjustment of the miter
• Protected vise spindle
• Massive machine base on both sides with holes for the mounting of the material stand MSR
• Long handle allows sawing without great effort with integrated push-button (on / off)
• Automatic switching on of the coolant pump when sawing
• Functional protection device, closed construction, movable
• Fast opening mechanism for optimum safety when cutting
• Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
• Massive machine base
• Protected vise spindle
• Machine base sizes:
  - CS 275 - 460 x 515 x 775 mm and
  - CS 315 - 546 x 620 x 801 mm
• The saw is delivered without circular saw blade (saw blade division freely selectable)

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany