UUED TOOTED

• For bending and bending of sheet metal
• Removable bending cheek segments
• Convenient pivoting movement of the bending beam over the lever handle
• High quality quality bending cheek
• For use on the vise

• Bending segment pieces 150 mm / 75 mm / 50 mm and 25 mm removable

• Grinding belt change in seconds due to the quick-tensioning system
• Easy adjustment of the belt run
• Automatic re-tensioning of the sanding belt by spring-supported belt tensioning system
• Infinitely tiltable sanding unit
• One belt speed each for grinding steel and stainless steel

• Powerful motors and vibration-free operation for the best sanding results
• Quick sanding belt change in seconds thanks to quick-release system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Continuous sanding surface after removal of attachments enables sanding of long workpieces too
• Can be used with and without extraction
• One extraction nozzle on the spark box and one on the rear belt roller
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective disk
• MBSM 75-240-2 and 150-240-2 models with two belt speeds for sanding steel and stainless steel

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Tehnilised andmed:

• Mootori võimsus: 0,75 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Puurimisvõimsus terases (S235JR): 25 mm
• Pidev puurimisvõimsus terases (S235JR): 20 mm
• Pöörete vahemik: 200–2440 p/min
• Käikude arv: 12
• Spindli koonus: MK3 (MT3)
• Kiirpingutatav puurpadrun: 1–16 mm
• Spindli käik: 80 mm
• Ulatus (spindli teljest sambani): 181 mm
• Spindli viskumistäpsus: ≤ 0,03 mm
• Töölaua mõõtmed: 280 × 280 mm
• T-soonte mõõt: 14 mm
• Puurpea pöördenurk: 360°
• Puurpea kallutus: ±45°
• Mõõdud (P × L × K): 700 × 350 × 1012 mm
• Netokaal: 67 kg
• Brutokaal: 84,6 kg
• Parem- ja vasakkäik

Komplekti kuulub kiirpingutatav puurpadrun, koonusadapter, T-mutrid ja masinakruustang BME 150

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

LMS 400 on professionaalne manuaalne kergmetallide ketassaag alumiiniumi, värviliste metallide ja profiilmaterjalide täpseks lõikamiseks. Varustatud suure saeketta, pööratava saepea ja tugeva töölauaga.

Tehnilised andmed:

• Tüüp: manuaalne kergmetallide ketassaag
• Kasutusala: alumiinium, värvilised metallid ja profiilmaterjalid
• Saeketta läbimõõt: 400 mm
• Toitepinge: 400 V
• Tugev teraskonstruktsioon
• Pööratav saepea nurklõigete tegemiseks
• Täpne materjali kinnitussüsteem
• Sobib profiilide ja torude lõikamiseks

Komplekti sisu:

• Metallkraft LMS 400 kergmetallide ketassaag
• Materjalikruustang
• Pikkusepiirik
• Kasutustööriistad
• Kasutusjuhend

Tehnilised andmed:

• Mootori võimsus: 1,5 kW
• Toitepinge: 400 V
• Poleerketta läbimõõt: 250 mm
• Poleerketta laius: 25 mm
• Ava läbimõõt: 20 mm
• Pöörlemiskiirus: 2850 p/min
• Mõõdud (P × L × K): 555 × 250 × 296 mm
• Kaal: 17,4 kg

Komplekti kuulub:

• 2 laia poleerimisketast

• Feed roller conveyor without length stop and without measuring system
• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• standard design
• Quality Made in Germany

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding even of long workpieces
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• heavy welded steel construction
• Horizontal and vertical work possibility
• Hydraulic adjustment of the upper roller
• all 3 rollers driven
• Rolls are hardened
• lateral straightening rollers, infinitely adjustable
• separate control panel with foot control
• powerful 400 volt engine

• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

Tehnilised andmed:

• Maksimaalne lõikekõrgus: 330 mm.
• Lõikeulatus (throat): 508 mm.
• Saelindi kiirus: 15–120 m/min ja 190–1500 m/min.
• Saelindi pikkus: 4035 mm.
• Saelindi laius: 13–27 mm.
• Saelindi paksus: 0,65–0,9 mm.
• Töölaua mõõtmed: 600 × 700 mm.
• Töölaua kandevõime: 350 kg.
• Töökõrgus: 990 mm.
• Töölaua kallutusnurk: 12° / 12°.
• Saelindi keevitusseadme võimekus: kuni 19 mm.
• Veoratta läbimõõt: 515 mm.
• Mootori võimsus: 2,2 kW.
• Toitepinge: 400 V / 50 Hz.
• Mõõtmed (P × L × K): 1090 × 780 × 2030 mm.
• Kaal: 570 kg.

Komplekti kuulub:

• Ringlõikeseade.
• Nurgapiirik kaldlõigete tegemiseks.
• Paralleeljuhik.
• Suurendusklaas.

MKS 350 Special Offer Set on professionaalne metalliketassaag terase, torude ja profiilmaterjalide täpseks lõikamiseks. Kahe lõikekiiruse, 45° pööratava saepea, topeltkruustangide ja jahutussüsteemiga masin sobib intensiivseks tööstuslikuks kasutuseks.

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,8 / 2,4 kW
• Lõikekiirused: 40 / 80 p/min
• Saeketta läbimõõt: 350 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav 45° vasakule ja paremale
• Kiirkinnituskruustang pööratav 45° vasakule ja paremale
• Topeltkruustang vastukruustangiga
• Kraadivastased kinnituslõuad
• Õlivannis töötav reduktor
• Jahutussüsteem membraanpumba ja filtriga
• Reguleeritav kettakaitse
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1000 × 1200 × 1475 mm
• Netokaal: 231 kg

Lõikevõime:

• Ümartäismaterjal 0°: 60 mm
• Ümartoru 0°: 110 mm
• Nelikanttoru 0°: 100 × 100 mm
• Ristküliktoru 0°: 120 × 80 mm
• Ümartäismaterjal -45°: 55 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 80 × 80 mm
• Ristküliktoru -45°: 80 × 80 mm
• Ümartäismaterjal +45°: 55 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 80 × 80 mm
• Ristküliktoru +45°: 80 × 80 mm

Komplekti sisu:

• Metallkraft MKS 350 metalliketassaag
• Jahutusseade koos filtriga
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Eripakkumise komplekti kuuluvad lisatarvikud

• Industrial motor
• Quiet running spindle thanks to new spindle design
• Machine operation with safety electrics in 24 V DC voltage
• Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
• Right/left rotation
• Precision spindle bore
• Control panel with user-friendly, dirt and water resistant membrane keypad
• Speed display
• Separate emergency stop impact switch
• Thread cutting function
• Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by ±45° and 360° rotatable
• Digital depth gauge
• LED machine light integrated in drill head
• V-belt cover with safety switch
• Thick-walled steel column for high force absorption and stability
• Solid, large-dimensioned base plate with T-slots
• Heavy-duty design of the entire machine

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: Sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe