UUED TOOTED

• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• Due to the foot control both hands remain free for the material supply
• Large dimensioned viewing window made of Plexiglas
• High-quality knife bar made of steel
• link guide
• Easy adjustment of the cutting blade via eight screws
• Angle adjustable side stop with millimeter scale
• Standard cut line lighting
• Optimum price-performance ratio

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Tehnilised andmed:

• Mootori võimsus: 0,6 kW
• Toitepinge: 400 V
• Pöörlemiskiirus: 2850 p/min
• Lihvketta läbimõõt: 200 mm
• Lihvketta laius: 30 mm
• Lihvketta ava läbimõõt: 32 mm
• Kaal: 17 kg

Traatharja omadused:

• Kõrgtugevast terastraadist harjas
• Saadaval erinevate traadijämedustega lisatarvikud

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Lõikevõime 0° ümartäismaterjal: Ø 440 mm.
• Lõikevõime 0° ristkülikprofiil: 460 × 400 mm.
• Pakilõikuse võimekus 0°: 460 × 400 mm.
• Saelindi kiirus: 15–150 m/min, sujuvalt reguleeritav.
• Saelindi mõõdud: 5360 × 34 × 1,1 mm.
• Saelindi kaldenurk: 7°.
• Minimaalne lõikepikkus: 10 mm.
• Minimaalne materjali läbimõõt: 10 mm.
• Minimaalne jääkdetaili pikkus: 30 mm.
• Töölaua kõrgus: 800 mm.
• Ajamimootori võimsus: 4,0 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Mõõtmed (P × L × K): 3875 × 1950 × 2190 mm.
• Netokaal: 2410 kg.

Varustus:

• Mitsubishi FX5 juhtsüsteem 4,3" puuteekraaniga
• BRP lõikeetteande juhtimine
• Hüdrauliline saelindi pingutus
• Hüdrauliline lõikeetteanne ja tagasikäik
• Kaheosaline hüdrauliline kruustang
• Elektriline laastuhari
• Emulsioonjahutus
• LED-töövalgustus
• Pööratav juhtpult

FSM 3060 PRO on NC-juhtimisega täppispinnalihvmasin, mis sobib tasapinna-, süvis- ja ristlihvimiseks. Tugev pingevabastatud malmkorpus, NSK P4 klassi spindlilaagrid ning automaatsed servoajamitega teljed tagavad suure täpsuse ja töökindluse ka raskemate töödetailide töötlemisel.

Tehnilised andmed:

• Magnetlaua mõõtmed: 600 × 300 mm
• Maksimaalne detaili kaal: 300 kg
• Maksimaalne kaugus spindli ja laua vahel: 500 mm
• X-telje käik: 700 mm
• Z-telje käik: 340 mm
• X-telje etteandekiirus: 5–25 m/min
• Spindli jooksutäpsus: 0,002 mm
• Spindli mootori võimsus: 3,75 kW
• Hüdraulikapumba võimsus: 0,75 kW
• Spindli pöörlemiskiirus: 1450 p/min
• Kiiruse reguleerimine: astmeteta (inverterjuhtimine)
• Lihvketta mõõtmed: Ø 355 × 38 × 127 mm
• Koguvõimsus: 7,6 kW
• Toitepinge: 400 V / 50 Hz
• Juhtsüsteem: 10" puutetundlik NC-juhtimine G1 (Y- ja Z-telg)
• Masina mõõtmed (P × L × K): 3000 × 2500 × 2460 mm
• Kaal: 2500 kg

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

OPTIgrind GU 20B on kvaliteetne ja vastupidav lihvkäi, mis ühendab lihvkivi ja traatharja võimalused ühes seadmes. Hooldusvaba mootor, tugev ekstrudeeritud alumiiniumkorpus ning grafiitkattega lihvimisseade tagavad sujuva töö, vähese kuumenemise ja pika kasutusea. Sobib metalli puhastamiseks, rooste eemaldamiseks, servade viimistlemiseks ning erinevate töödetailide lihvimiseks ja harjamiseks.

Tehnilised andmed:

• Toitepinge: 230 V
• Sagedus: 50 Hz
• Mootori võimsus: 600 W (0,6 kW)
• Pöörlemiskiirus: 2850 p/min
• Lihvkivi mõõt: Ø200 × 30 mm
• Lihvkivi ava läbimõõt: 32 mm
• Traatharja mõõt: Ø200 × 25 mm
• Traadi läbimõõt: 0,3 mm
• Mõõtmed (P × L × K): 517 × 345 × 282 mm
• Netokaal: 18,5 kg

Komplekti kuulub: lihvkivi Ø200 × 30 mm, traathari Ø200 × 25 mm, töödetaili tugi ja tolmueemaldusotsik.

Lisatarvikud: erineva karedusega lihvkivid ja erineva traadijämedusega traatharjad.

Tehnilised andmed:

• Maksimaalne töölaius: 1020 mm
• Maksimaalne lehe paksus terase puhul: 2,5 mm (materjali tõmbetugevus 400 N/mm²)
• Maksimaalne lehe paksus alumiiniumi puhul: 3,0 mm
• Maksimaalne lehe paksus kõrgtugevast terasest (700 N/mm²): 1,5 mm
• Maksimaalne painutusnurk: 135°
• Ülemise ja alumise tala vaheline avaus: kuni 25 mm
• Mõõdud (P × L × K): 1350 × 800 × 1130 mm
• Netokaal: 290 kg
• Brutokaal: 355 kg
• Jalapedaaliga materjali kinnitamine jätab mõlemad käed vabaks detaili käsitsemiseks
• Painutamist hõlbustav abisilinder
• Isemäärduvad liuglaagrid
• Reguleeritav painutusnurga piiraja
• Materjali paksuse reguleerimine rihvelkruvi abil
• Ülemise tala survejõu reguleerimine libisemiskindlate käsikruvidega
• Varustatud segmenteeritud teravnurgapainutuse tööriistade, pideva painutuslati ja pideva aluslatiga (E-versioon)
• Segmentide mõõdud: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200 ja 270 mm
• Roostevaba terase painutamisel tuleb kasutada karastatud ülemisi tööriistu

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Changing the sanding belt in seconds due to the quick-release system
• Automatic re-tensioning of the sanding belt using the spring-loaded belt tensioning system
• Easy adjustment of the belt run using the adjusting screw
• Can be used as a table model and also as a standing model with the optional base

• Powerful motors and vibration-free operation for the best sanding results
• Sanding belt can be changed in seconds thanks to the quick-clamping system
• Automatic retensioning of the sanding belt thanks to spring-supported belt tensioning system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Continuous sanding surface after removal of attachments enables sanding of long workpieces as well
• Can be used with and without suction
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Can be used as a table model and, with the optional base, also as a floor model

• two cutting speeds
• rotatable machine head at 45 ° to the left and 45 ° to the right
• Reduction gear, silent in oil bath running
• automatic membrane coolant pump with coolant filter
• Vise with counter vise, quick release and anti-jaw clamping jaws guarantees a precise and burr-free cut
• lateral material support arm with roller
• Vice can be swiveled 45 ° to the left and 45 ° to the right
• movable protection device ensures optimum safety when cutting
• Control handle with safety switch
• Vise with counter vise, quick release and anti-jaw clamping jaws
• lateral material support arm with roller
• Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits
• Quality Made in Europe

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile foconveyor belt for optimum hold during processing
• NC control with 8" touch screen

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Device for pneumatic folding away of the material arm to the rear
• Pneumatic cylinder handles this task simply and conveniently from the central operator console via a rotary switch