UUED TOOTED

Sorteerimine

Kuva leheküljel

03-04621

NEO E+ robotniiduk on nutikas ja mugav lahendus muru automaatseks hooldamiseks. Seade niidab murupinda iseseisvalt, aidates hoida muru ühtlaselt hooldatud minimaalse ajakuluga. Robotniiduk sobib suurepäraselt koduaedadesse, pakkudes vaikset, energiasäästlikku ja tõhusat tööd.

Tegemist on E+ akusüsteemiga ühilduva mudeliga, mis tarnitakse ilma aku ja laadijata, võimaldades kasutada juba olemasolevaid E+ seeria akusid ning vähendada lisakulusid. Kompaktne konstruktsioon ja automaatne töörežiim tagavad mugava kasutuskogemuse kogu niiduhooaja vältel.

Peamised eelised:

Täisautomaatne muru niitmine
Ühilduv NEO E+ akusüsteemiga
Tarnitakse ilma aku ja laadijata
Vaikne ja energiasäästlik töö
Aitab hoida muru pidevalt ühtlase ja hooldatuna
Sobib koduaedade regulaarseks muruhoolduseks

Tehnilised andmed:

Mudel: E+ robotniiduk
Toide: E+ akusüsteem
Aku komplektis: Ei
Laadija komplektis: Ei

NEO E+ robotniiduk on ideaalne valik kasutajale, kes soovib automatiseerida muruhooldust ning kasutada olemasolevaid E+ seeria akusid paindlikult ja kuluefektiivselt.

607,10€

Tellimisel

Lihvketas 115 × 22,2 mm, K120

02-55H985

Grinding disc GRAPHITE (ref. no. 55H985) with diameter 115 mm and granulation K120, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,80€

Tellimisel

Pneumatic ratchet angle spanner 1/2", 88 Nm

03-14012

NEO 1/2" Pneumatic ratchet angle spanner (ref. no 14-012). Professional pneumatic ratchet angle spanner is used in workshop tasks. Maximum torque 88 Nm. Adjustable left/right rotation. Useful for undoing bolts in hardly accessible places. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.

88,40€

Tellimisel

Hook 85 mm, 5 pcs set

03-84097

NEO hanger 85 mm, 5 pcs (ref. no. 84-097) is made of steel and is a part of the NEO system. The hanger makes it easier to hang tools away during work, helps to maintain order and provides quick access to the tools. Use various parts of the NEO system to compose your own perfect place for storage of tools.NEO brand meets expectations of professionals.

15,70€

Tellimisel

Flap wheel 125 x 22.2 mm, K60, zirconia

03-57842

Flap wheel 125 x 22.2 mm, P60, zirconia 57-842 by NEO TOOLS is a 125 mm diameter, P60 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.

4,50€

Tellimisel

Zirconia flap wheel 125 x 22.2 mm, P100

02-58T103

Zirconia flap wheel 125 x 22.2 mm, P100, 58T103 by GRAPHITE has dimensions of 125 × 22.2 mm and gradation P100. The maximum speed is 12 250 rpm and the working speed is 80 m/s. The leaves are arranged in a fan pattern and made of zirconia grit. It is designed for grinding ordinary, stainless, stainless and acid-resistant steels. The backing is X-grain cloth for machine grinding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.

2,29€

Tellimisel

Flap wheel with abrasive fleece, mounted 30 x 25 x 6 mm, P60

02-58T411

The 30 x 25 x 6 mm, P60, 58T411 flap wheel by GRAPHITE is a 30 mm diameter, 25 mm high, 6 mm shank and P60 gradation accessory for use with drills and straight grinders. The GRAPHITE grinding wheel has a maximum speed of 22,000 rpm and a linear speed of 35 m/s. The tool enables grinding of external and internal surfaces and hard-to-reach areas. The GRAPHITE brand grinding wheel adapts to the shape of the workpiece.

1,70€

Tellimisel

Sõrgkang 900 mm, kuuskant 15,5 mm

01-04A239

10,50€

Tellimisel

Tool cabinet 7-drawer PRO with accessories, 359 tools - EVA

03-842256

PRO 12-drawer tool cabinet with accessories, 358 tools 84-225-6 by NEO TOOLS is a professional tool cabinet with a maximum load capacity of 600 kg. It is offered with 358 tools of the NEO TOOLS brand, with 12 drawers designed for them (high and low in two sizes - large and small). The EVA foam-lined drawers contain 6 inserts with equipment such as: ¼" and 3/8" hexagonal sockets, TORX sockets, pentagonal, HEX and TORX bits, joints, adapters, extensions, ratchets, spanners, candle sockets, socket bits, screwdrivers, files, hammers or pliers. The NEO TOOLS tool cabinet features dimensions of 1105 x 465 x 97 mm and a height without wheels of 825 mm. It has a lockable cabinet, side perforation for NEO TOOLS hooks, an aluminium top with spaces for screwdrivers and accessories, and informative stickers on the drawer fronts. The drawers are equipped with a locking mechanism and allow 100% opening. The cabinet has a robust SPCC steel construction. It will be suitable for any professional. The PRO Moto Expert series will suit the most demanding users.

1907,31€

Tellimisel

Pimeneedid öösitangidele 200 tk

01-32D420

Komplekt sisaldab 200 neeti, mis sobivad suurepäraselt ehitus-, remondi-, paigaldus- ja hooldustöödeks nii kodus kui ka töökojas.

Needid võimaldavad luua vastupidavaid ühendusi metall-, plastik- ja teiste lehtmaterjalide vahel. Tänu praktilisele komplektile on käepärast piisav kogus neete erinevate tööde teostamiseks.

Omadused:

Komplektis 200 pimeneeti
Sobib kasutamiseks enamike needitangidega
Tugevate ja vastupidavate ühenduste loomiseks
Sobib metalli, plasti ja teiste lehtmaterjalide ühendamiseks
Ideaalne remondi-, paigaldus- ja ehitustöödeks
Praktiline valik nii kodukasutajale kui ka professionaalile

2,50€

Tellimisel

Lihvketas 115 × 22,2 mm, K100

02-55H984

Grinding disc GRAPHITE (ref. no. 55H984) with diameter 115 mm and granulation K100, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. Product with C-cloth backing designed for mechanical grinding. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,80€

Tellimisel

Colour matching lamp 2 in1 + station and charger

03-99098

Colour matching lamp 2 in 1 + station and charger 99-098 by NEO equipped with LED: COB and a UV diode. It has a colour rendering index CRI>90 and is characterised by the following functions: COB warm - COB natural - COB cool - TOP UV LED-OFF, where the maximum output powers are: 380 lumens (warm) / 350 lumens (natural) / 390 lumens (cool). The operating time, on the other hand, is estimated to be between 4 and 4.5 hours, depending on the selected mode. The lamp has a 3.7V 4000 mAh battery and a 5V 1A power supply. The built-in type C charging port allows the device to be fully charged in 5 hours. The lamp for colour matching car paintwork under natural and UV light will be a must-have for any bodyshop. It will also prove useful in the case of coolant leaks, if the correct doped refrigerant is used beforehand. The unit has an IP67 waterproof rating. Its size is 185 x 50 x 32 mm and its weight (without base) is 245 g. The lamp is offered with a station, charger, hook and base magnet. Recommended for professionals as well as DIY enthusiasts.

57,00€

Tellimisel

Pneumatic stapler for staples gauge Type80: 6-16 mm

03-14572

NEO pneumatic stapler is designed for all upholstery and carpentry tasks. This sturdy tool is designed to drive 80 type staples of various lengths. The set includes protective glasses, nail clip, staple clip, oil and hex key. All come in convenient case. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.

64,29€

Tellimisel

Zirconia flap wheel 115 x 22.2 mm, P60

02-58T106

Zirconia flap wheel 115 × 22.2 mm, P60, 58T106 by GRAPHITE has dimensions of 115 × 22.2 mm and gradation P60. The maximum speed is 13 300 rpm and the working speed is 80 m/s. The leaves are arranged in a fan pattern and made of zirconia grit. It is designed for grinding ordinary, stainless, stainless and acid-resistant steels. The backing is X-grain cloth for machine grinding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.

2,10€

Tellimisel

Flap wheel 30 x 15 x 6 mm, P100

02-58T403

The flap wheel 30 x 15 x 6 mm, P100, 58T403 by GRAPHITE has dimensions of 30 × 15 × 6 mm and gradation P100. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 22,000 rpm and the working speed is 35 m/s.

1,30€

Tellimisel

Brushless drill/driver with impact, 100 Nm, 18V Energy+, without battery

03-04616

The 100 Nm Energy+ 04-616 drill/driver with impact by NEO features a brushless motor and impact. It operates on the Energy+ battery system and is compatible with lithium-ion batteries. The recommended battery capacity is 4 Ah. The tool features a torque of 100 Nm and an impact frequency of 7680 in 1st gear and 30400 in 2nd gear, with a maximum of 480 revolutions per minute (1st gear) and 1900 revolutions per minute (2nd gear). Equipped with a robust metal head and a 13mm quick-clamp drill chuck. The drill/driver has an illumination and a comfortable, rubberised handle. An additional handle helps with the tool. The weight of the device is just 1.53 kg. It is a product from the NEO brand recommended for professionals and DIY enthusiasts.

129,70€

Tellimisel

Pneumatic needle scaler 19 x 3 mm

03-14032

NEO's 19 x 3 mm 19 x 3 mm 14-032 head needle hammer for rust and welds is a tool that reaches 5000 strokes per minute. Equipped with 19 needles with a diameter of 3 mm, it offers comfortable cutting and efficient work in metal. The working pressure of the hammer is 6.3 bar and the average air consumption is 85 l/min. The tool has a 1/4" connector. Its weight is 2.8 kg. It will prove itself for demanding tasks. The quality is confirmed by the CE certificate.

156,40€

Tellimisel

Telescopic floodlight 3000 lm

03-99124

Halogen telescopic floodlight 3,000 lm 99-124 by NEO TOOLS is a multi-purpose lighting device on telescopic legs, allowing the light to be adjusted thanks to an adjustable height of up to 103 cm and adjustment of the angle of light projection. The spotlight is equipped with powerful COB LEDs, offering up to 3,000 lm of illumination. It functions on the basis of a 10 000 mAh battery. Its charging time to full is 8 hours (USB C cable included). Once charged, it can operate for up to 21 hours (at settings of 750 LM, 10 h - 500 LM, 5 h - 3 000 LM). It also functions while charging, and a built-in indicator shows the progress of energy accumulation. The headlamp from the NEO TOOLS brand allows for cold and warm light. The kelvin indicator and the colour indicator allow you to better determine the type of lighting you need. Thanks to the power bank function, it is possible to connect a phone or other small device to it for charging. The NEO TOOLS halogen spotlight will prove useful in the workshop, on the construction site and in many other situations.

78,19€

Tellimisel

Workshop lamp rechargeable 200 lm COB + flashlight

03-99041

Battery workshop lamp + torch 2 in 1 NEO (ref. 99-041) is equipped with COB LEDs with a power of 3W and luminous flux of 200 lumens. The product can be used as a lamp or a torch. The lamp is powered by the included 3.7V Li-Ion battery with a capacity of 1200 mAh. It has 5 lighting functions: 100%, 50% , red light, red strobe light and torch. The foldable design allows you to fold the product to a compact size. Compliance with European safety standards is confirmed by the CE certificate.

25,49€

Tellimisel

Workshop lamp rechargeable 500 lm COB LED

03-99066

NEO cordless workshop lamp (ref. 99-066) is equipped with COB LEDs with a luminous flux of 500 lumens and a power of 6W. It is powered by the included 3.7V Li-Ion battery with a capacity of 2400 mAh. The foldable design allows you to position the lamp according to your needs. The lamp has a hook so that it can also be stored in a hanging position.

48,40€

Tellimisel