UUED TOOTED

PREMIUM NEO work trousers made of 60% cotton, 35% polyester, 5% elastane are comfortable trousers dedicated to all professional and domestic work. The addition of elastane makes the trousers fit better and do not restrict movement. To accommodate various tools, the trousers are equipped with several multifunctional pockets. The knees have pockets for knee pads, and they are profiled and reinforced with Cordura. In addition, there are special pockets for knee pads. The waist is adjustable, which makes it easier to fit the trousers. CE certified to EN ISO 13688:2013, available in sizes XS-XXXL.

Angle sanding sponge GRAPHITE (ref. no. 55H927) with dimensions 98 x 25 x 68 mm and granulation 180. Designed for finishing work. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. The sponge shape fits well in your hand. The abrasive sponge has one oblique side and one curved side, which make hard-to-reach places easily accessible for processing. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

NEO working trousers are comfortable and convenient product from the workwear product line for professionals and DIY enthusiasts doing renovation tasks at home. They are made of strong cotton and polyester blend. They have pockets for foam knee pads for greater comfort at work. Elastic rubber band allows good fit in waist. Multifunction pockets withstand even high loads and can carry all necessary tools. Product quality is guaranteed with European CE certificate and manufacturing process compliant with EN ISO 13688:2013. NEO brand meets expectations of professionals.

NEO work gloves provide protection for your hands against dirt, scratches and harmful conditions during work. Made of latex coated nylon. They ensure comfort during use, enabling confident grip, even of small objects, at the same time preventing the tools from slipping from your hands. CE marking is a safety guarantee proving that the product meets all EU requirements. Available in sizes: 8", 9", 10".

NEO work trousers (ref. 81-420-XL) are a comfortable and practical product from the workwear line for both professionals and DIY enthusiasts undertaking home repairs. They are made from a durable blend of cotton and polyester. They have pockets for foam knee pads, which significantly increases working comfort. Thanks to the elastic waistband, they fit well on the hips. The multifunctional utility pockets can withstand even heavy loads and store all the necessary tools. Quality is guaranteed by the European CE certificate and the workmanship according to EN ISO 13688:2013. The NEO brand meets the expectations of professionals.

Sanding cloth GRAPHITE (ref. no. 55H879) in a sheet with dimensions 230 x 280 mm and granulation 150. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Solid carbide saw blade GRAPHITE (ref. no. 55H611) with diameters 250 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for cutting oaluminium materials. Thanks to included adapter rings it is possible to use the blade in most of saw models.

Metal drills GRAPHITE (ref. no. 57H055) with diameters 10.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

GRAPHITE metal drill with 12.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

Fibra sanding disc GRAPHITE (ref. no. 55H857) with outer diameter 125 mm and granulation 80. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

The GRAPHITE impact bit set (ref. 56H562) includes 10 bits PH1/2/3, PZ1/2/3, TX25/27/30/40, total length 50 mm. These are durable bits designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. Set with a carabiner for attaching to the belt loop. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

VERTO felt rubber boots (ref. no. 15G901), size 40. Outside and soles are made of plastic and are waterproof. Boots have felt lining inside, which guarantees comfort and optimal conditions for feet. Anti-skid sole features thermal insulation and resistance to fuel oil for safety and comfort at work. The felt rubber boots are CE certified.

TOPEX cutting wheel for ceramic tile cutter with dimensions 22 x 10.5 x 2 mm. It is a spare part for machines used in glaze laying works. TOPEX brand is oriented towards DIY enthusiasts.

NEO work gloves provide protection for your hands against dirt, scratches and harmful conditions during work. Made of polyester with cotton blend covered with rubber dots. They ensure comfort during use, enabling safe grip, even of small objects, at the same time preventing the tools from slipping from your hands. CE marking is a safety guarantee, proving that the product meets all EU requirements. Available in sizes: 8", 9", 10".

NEO working T-shirt of CAMO series, olive green with unique and asymmetric camouflage pattern.The product is made of high quality cotton knitted fabric. Urban style allows for comfortable use also out of work. Product quality is guaranteed by European certificate CE. NEO brand meets expectations of professionals.

GRAPHITE metal drill with 3.2 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

Abrasive sponge GRAPHITE (ref. no. 55H920) with dimensions 70 x 25 x 10 mm and granulation 180. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Solid carbide saw blade GRAPHITE (ref. no. 55H610) with diameters 210 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for cutting oaluminium materials. Thanks to included adapter rings it is possible to use the blade in most of saw models.

Fibra sanding disc GRAPHITE (ref. no. 55H855) with outer diameter 125 mm and granulation 40. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Masonry drill VERTO (ref no. 60H180) with 12.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.