UUED TOOTED - Hammerjack

02-56T552

PH1 x 25mm stop bits, 2 pieces 56T552 by GRAPHITE is a 25mm long PH1 stop bit set containing 2 pieces made from durable CrV steel. The bits are fitted with a ¼" chuck, making them compatible with most drills and drill drivers. The bits with depth stop enable precise and safe screwdriving, especially when installing plasterboard or panels. Suitable for effectively tightening and loosening screws, the GRAPHITE stop bits will prove useful for many tasks.

1,20€

Tellimisel

Kruvikeeraja otsikud piirajaga PZ1 25 mm, 2 tk

02-56T550

GRAPHITE PZ1 kruvikeeraja otsikute komplekt koosneb kahest 25 mm pikkusest otsikust, mis on varustatud sügavuspiirajaga. Piiraja võimaldab kruvide ühtlast ja kontrollitud sügavusse keeramist ning aitab vältida materjali kahjustamist. Sellised otsikud sobivad eriti hästi kipsplaadi, paneelide ja muude plaatmaterjalide paigaldamiseks.

Otsikud on valmistatud vastupidavast kroom‑vanaadiumterasest (CrV), mis tagab hea kulumiskindluse ja pika kasutusea. Standardne 1/4" kuuskantkinnitus teeb need ühilduvaks enamiku akutrellide ja kruvikeerajatega.

Tehnilised andmed:

Tüüp: Pozidriv PZ1
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: kroom‑vanaadiumteras (CrV)
Lisafunktsioon: sügavuspiiraja
Komplektis: 2 tk
Kasutusala: kipsplaadi ja paneelide paigaldus, üldised kruvitööd

1,20€

Tellimisel

Kruvikeeraja otsikud piirajaga PH2 25 mm, 2 tk

02-56T551

GRAPHITE PH2 kruvikeeraja otsikute komplekt koosneb kahest 25 mm pikkusest otsikust, mis on varustatud sügavuspiirajaga. Piiraja võimaldab kruvide täpset ja ühtlast sügavusse keeramist, vältides materjali kahjustamist. Sellised otsikud sobivad eriti hästi kipsplaadi, paneelide ja muude plaatmaterjalide paigaldamiseks.

Otsikud on valmistatud kulumiskindlast kroom‑vanaadiumterasest (CrV), mis tagab hea vastupidavuse ja pika kasutusea. Standardne 1/4" kuuskantkinnitus muudab need ühilduvaks enamiku akutrellide ja kruvikeerajatega.

Tehnilised andmed:

Tüüp: Phillips PH2
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: kroom‑vanaadiumteras (CrV)
Lisafunktsioon: sügavuspiiraja
Komplektis: 2 tk
Kasutusala: kipsplaadi ja paneelide paigaldus, üldised kruvitööd

1,20€

Tellimisel

Otsik PZ3 × 50 mm, 3 tk

02-56T532

PZ3 x 50 mm, 3 pieces 56T532 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Tellimisel

Torx otsik T25 × 25 mm, 3 tk

02-56T521

Torx bits T25 x 25 mm, 3 pieces 56T521 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.

1,00€

Tellimisel

Otsik PH2 × 50 mm, 3 tk

02-56T539

Bits PH2 x 50 mm, 3 pieces 56T539 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Tellimisel

Löökotsik PH2 × 25 mm, 2 tk

03-56501

NEO TOOLS PH2 löökotsikud on 25 mm pikkused kruvikeerajaotsikud. Komplekt sisaldab 2 otsikut.

Otsikud on valmistatud vastupidavast S2 terasest, mis tagab suure kulumiskindluse ja töökindluse ka intensiivsel kasutamisel. Neil on 1/4" HEX‑kinnitus, mis sobib enamiku löökkruvikeerajate ja otsikuhoidikutega.

NEO TOOLS löökotsikud sobivad suurepäraselt nii professionaalseks kasutamiseks kui ka isetegemise töödeks, pakkudes usaldusväärset ja täpset tulemust.

2,10€

Tellimisel

Otsik TX10x25mm, 1/4" (2tk/pakis)

03-57971

1,95€ 2,10€

Laos 4

Augusaag teemant 45xM14

03-55312

The 45 mm x M14 diamond hole saw, 55-312 by NEO TOOLS, with a diameter of 45 mm and M14 thread, is designed for dry work with an angle grinder. The durable vacuum brazed diamond blank and the side holes facilitate air ventilation and removal of spoil. The working length is 40 mm and the overall length is 60 mm, making it easy to drill typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.

38,04€ 40,90€

Laos 3

Kuuskantotsik H5 × 25 mm, 3 tk

02-56T530

Hex bits H5 x 25 mm, 3 pieces 56T530 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

Tellimisel

Otsik PZ2 × 50 mm, 3 tk

02-56T533

PZ2 x 50 mm bits, 3 pieces 56T533 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Tellimisel

Seljakott tööriistadele, tugevdusega

03-84329

NEO TOOLS tööriistade seljakott, tugevdusega (ref. 84‑329) on mahukas ja vastupidav seljakott, mis on varustatud lisatugevdustega ning sobib kasutamiseks väga erinevates olukordades. Seljakoti maht on kuni 20 liitrit ning mõõdud on 370 mm (laius) × 275 mm (sügavus) × 515 mm (kõrgus).

Seljakotil on ruumikas põhisahtel, 4 välist taskut ning kokku 35 sisetaskut, mis võimaldavad mugavalt hoiustada suurt hulka tööriistu ja tarvikuid. Kummikattega põhi ja jäik konstruktsioon tagavad stabiilsuse ning kaitsevad sisu kahjustuste eest.

Vastupidav 600D polüesterkangas hoiab tööriistad kaitstuna niiskuse ja mustuse eest, muutes seljakoti sobivaks nii igapäevaseks professionaalseks kasutuseks kui ka koduseks meisterdamiseks.

NEO TOOLS tööriistade seljakott on suurepärane valik nii spetsialistidele kui ka hobitöö tegijatele.

142,20€

Tellimisel

Löökotsik HEX4 × 25 mm, 2 tk

03-56507

NEO TOOLS HEX4 löökotsikud on kompaktsed ja löögikindlad otsikud kuuskantpeaga kruvide jaoks, mis on valmistatud vastupidavast S2 terasest ja sobivad intensiivseteks montaažitöödeks.

HEX4 profiil tagab kruvis kindla ja täpse istuvuse, vähendades libisemist ja kulumist. 1/4" HEX‑kinnitus tagab laia ühilduvuse erinevate otsikuhoidikute ja otsikumagasinidega.

2‑osaline komplekt võimaldab otsikuid mugavalt vahetada ja tagab töö sujuvuse hoolduses, montaažil ning töökojas.

2,10€

Tellimisel

Torx otsik T15 × 25 mm, 3 tk

02-56T523

Torx bits T15 x 25 mm, 3 pieces 56T523 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

Tellimisel

Otsik PH3 × 50 mm, 3 tk

02-56T538

Bits PH3 x 50 mm, 3 pieces 56T538 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Tellimisel

Trimmerijõhv 16mmx3m, trimmerile 58GE112

03-5811218

Trimmerijõhv 58GE112, 58-112-18, NEO TOOLS sobib kasutamiseks GRAPHITE 18V akutoitega murutrimmeriga 58GE112.

Jõhvi pikkus on 3 m ja läbimõõt 1,6 mm. See on vastupidav ning sobib suurepäraselt kasutamiseks nii aiamaal kui ka koduaias.

2,60€

Tellimisel

Magnetiline otsikuhoidik 60 mm, 1/4" kuuskant

02-56T510

Magnetic chuck 60 mm, 1/4" Hex 56T510 by GRAPHITE is designed for use with screwdrivers and drill drivers. The magnet holding the bit in the socket makes work more convenient and efficient. The bit size is 1/4" (hexagon). The GRAPHITE brand chuck is made from tool steel. The magnet also makes it possible to attach the blades quickly and prevents them from falling out. The length of 60 mm, on the other hand, makes the handle handy and suitable for working in hard-to-reach places. The product is compatible with most screwdrivers and drills. The GRAPHITE magnetic chuck is ideal for assembly work, carpentry, renovation and anywhere else where a quick change of tool bits is required.

1,30€

Tellimisel

Höövel 240 × 30 mm, tera 30 mm

01-11A230

TOPEX rebate plane for wood processing (ref. no. 11A230). Made of high quality beech wood. Ergonomic shape provides work comfort. Option to position blade to allow for cutting wood in corners is an additional advantage. TOPEX brand is oriented towards DIY enthusiasts.

29,00€

Tellimisel

Löökotsik PH1 × 25 mm, 2 tk

03-56500

2,10€

Tellimisel

Otsik PZ1 × 25 mm, 3 tk

02-56T537

The PZ1 x 25 mm bits, 3 pieces 56T537 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

Tellimisel