Otsing

Sisseloginud kliendile kuni -10% tavahinnast

Näita hindu KM-ga
ET
Kõik kategooriad
    Menüü Sulge

    Sisseloginud kliendile kuni -10% tavahinnast

    UUED TOOTED

    Vaata kui Tabel Nimekiri
    Sorteerimine
    Kuva leheküljel
    Stud joint tool set, 43 pcs
    01-60H285
    Pin Connector Set, 43 pieces VERTO (ref. 60H285) is an offer for the beginner or intermediate DIY enthusiast, which will allow you to easily make connections in wood or wood-based materials. With this set it is possible to make holes with diameters: 6, 8 and 10 mm. The set includes: 3 pcs wood drill bits, 3 pcs depth stops, 6 pcs markers indicating the place of drilling, 30 pcs dowels of three different diameters (6, 8, 10 mm), hex key.
    9,70€
    Laost otsas. Tellides tarneaeg nädalat
    Survival knife full-tang 23 cm
    03-63111
    NEO full-tang tactical knife (ref. 63-111) with an overall length of 23 cm and a blade of 12 cm. It was made of high quality stainless steel, resistant to mechanical damage. The handle with a full tang is made of wood. The set includes a belt pouch.
    35,20€
    Laost otsas. Tellides tarneaeg nädalat
    Cutting disc for stone 230 x 3.2 x 22.2 mm 42 37C30-R-BF
    02-57H725
    GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
    3,91€
    Laost otsas. Tellides tarneaeg nädalat
    EXTREME cable ties 7.6 x 500 mm, white, 50 pcs
    03-01667
    EXTREME 7.6 x 500 mm, white, 50 pcs, 01-667 by NEO TOOLS is a universal item made of high quality PA66 nylon, offered in a pack of 50 pieces. The ties are characterised by dimensions: 7.6 x 500 mm and white in colour. They are distinguished by their reinforced tear resistance (strength up to over 65 kg), good elasticity, UV resistance and precise fit to the component to be clamped. Recommended for use in the workshop, home and garden.
    7,90€
    Laost otsas. Tellides tarneaeg nädalat
    Tactical knife full-tang 25 cm
    03-63110
    NEO tactical knife (ref. 63-110) with an overall length of 25 cm and a full-tang blade of 14.5 cm. It is made of titanium-coated stainless steel and the handle is made of bamboo. A nylon belt pouch is included.
    26,80€
    Laost otsas. Tellides tarneaeg nädalat
    Padlock 75 mm, 3 keys
    03-85060
    Padlock 75 mm, 3 keys 85-060 by NEO TOOLS is a cast iron model equipped with 3 keys. The yoke with a diameter of 8 mm and dimensions of 75 x 21 x 105 mm provides adequate strength, and the seals used protect the mechanism from rain, thus increasing the weather resistance of the NEO TOOLS padlock. It is a practical protection that will prove useful in various applications - both indoors and outdoors.
    7,01€
    Laost otsas. Tellides tarneaeg nädalat
    Strip extension cord 1.5 m, 3 x 1.5 mm2, 5G, white, ON/OFF
    03-90177

    1,5 m pikkune pikendusjuhe viie maandusega pistikupesaga sobib kodu-, kontori- ja töökojakasutuseks. Varustatud ON/OFF-lülitiga, mis võimaldab kõiki ühendatud seadmeid mugavalt korraga sisse ja välja lülitada. Tugevad 3 × 1,5 mm² vaskjuhtmed tagavad ohutu ja usaldusväärse vooluülekande. Maksimaalne koormus on 3680 W (16 A / 230 V).

    7,30€
    Laost otsas. Tellides tarneaeg nädalat
    Wall scanner 3 in 1
    03-75250
    Detector with display NEO (ref. 75-250) is a digital 3-in-1 detector characterised by precision measurement and accuracy to +/- 10 mm. It is used to detect metal, live wires and wood. Useful for locating concealed cables, studs and wooden profiles, metal pipes and rebar. It will meet the expectations of DIY enthusiasts as well as professionals. It has a built-in audible signal. It is powered by a 9V battery, which allows for work up to 4 hours. The set includes a fabric case and a battery.
    72,80€
    Laost otsas. Tellides tarneaeg nädalat
    Chain cleaning nylon brush
    03-10509
    Chain cleaning nylon brush 10-509 by NEO is a nylon brush for cleaning the chain of motorbikes, quads, bikes, machines, etc. One side of it has a U-shape for precision cleaning, and the other-straight side-is designed for reaching into hard-to-reach places. The length of the brush is 24.5 cm. Recommended for use with specialised fluids to help get rid of stubborn dust, sand or old grease, preserving the chain's long useful life. Remember to switch off the machine's engine when cleaning and wear gloves and safety goggles.
    4,01€
    Laost otsas. Tellides tarneaeg nädalat
    Garage hooks, set 16 pcs
    03-84143
    NEO Garage Hooks is a set of 16 pieces of sturdy hooks and brackets to keep your basement, garage and workshop tidy. Ideal for storing bicycles, ladders, garden equipment etc. The hooks come in different sizes and depths and some are padded with protective foam to prevent scratching. Screws and wall plugs are included.
    43,80€
    Laost otsas. Tellides tarneaeg nädalat
    Strip extension cord 3 m, 3 x 1.5 mm2, 3G, white, ON/OFF
    03-90178

    NEO Tools 3 meetri pikkune pikendusjuhe kolme maandusega pistikupesaga sobib kasutamiseks kodus, kontoris ja töökojas. Varustatud ON/OFF-lülitiga mugavaks voolu sisse- ja väljalülitamiseks. Vastupidav 3 × 1,5 mm² vaskjuhtmetega kaabel tagab usaldusväärse vooluülekande ning sobib kuni 16 A koormusele.

    8,80€
    Laost otsas. Tellides tarneaeg nädalat
    EXTREME cable ties 3.6 x 150 mm, black, 100 pcs
    03-01626
    EXTREME 3.6 x 120 mm, black, 100 pieces, 01-626 by NEO TOOLS is a universal item made of high-quality PA66 nylon, offered in a pack of 100 pieces. The ties are characterised by dimensions: 3.6 x 120 mm and black, practical colour. They are distinguished by their reinforced tear resistance (strength up to over 30 kg), good elasticity, UV resistance and precise fit to the component to be clamped. Recommended for use in the workshop, home and garden.
    2,00€
    Laost otsas. Tellides tarneaeg nädalat
    Timing tool set - Ford ECOBOOST gasoline engine
    03-11336
    Timing gear lock set for petrol engines ECOBOOST Ford NEO is a tool set for locking the timing gear on Ford cars. The kit includes items for locking the timing gear on EcoBoost petrol engines. It provides basic tools for setting and locking the engine. The set is packaged in a carrying case.
    76,50€
    Laost otsas. Tellides tarneaeg nädalat
    Convector heater with thermostat 2000W standard
    03-90154
    The convector heater with thermostat 2000 W standard 90-154 by NEO TOOLS is a device designed to effectively heat small domestic, office or workshop spaces. Offered with a thermostat, it provides 3 heating stages while providing 750 W, 1250 W and 2000 W of power. The convector heater by NEO TOOLS has a practical power indicator light and overheat protection, which significantly contributes to its comfort. Thanks to the carrying handle, it is easy to transport. The NEO TOOLS convector heater with a 1.4 m cable is characterised by its universal use and robustness for years.
    34,30€
    Laost otsas. Tellides tarneaeg nädalat
    Ceiling bracket for panels 90-102/90-103/ 90-105 / 90-106
    03-90108
    Ceiling bracket for NEO panels (ref. 90-108) enables the heating panel to be mounted on the ceiling. It is dedicated to heating panels with indexes: 90-102, 90-103, 90-105, 90-106.
    19,20€
    Laost otsas. Tellides tarneaeg nädalat
    PTC ceramic electric heater, 2kW
    03-90060

    2 kW PTC-keraamiline elektriline soojapuhur (90-060) on kaasaskantav kütteseade, mis on mõeldud töökodade, garaažide, kodumajapidamiste ja kaupluste kütmiseks. Keraamiline kütteelement ning tugev õhuvool tagavad kiire ja tõhusa soojenemise ka pikema vahemaa tagant, säilitades samal ajal madala mürataseme.

    Seade on varustatud soojust isoleeriva plastkäepidemega, mis muudab selle transportimise mugavaks ja ohutuks. Pulbervärvitud metallkorpus kaitseb soojapuhurit korrosiooni eest ning tagab pika kasutusea.

    Reguleeritav termostaat ja töörežiimi lüliti võimaldavad seadmel kohanduda ümbritseva temperatuuri muutustega. Sisseehitatud ventilaator aitab vältida niiskuse, ebameeldivate lõhnade ja veeauru teket ruumis.

    Ohutuse suurendamiseks lülitub soojapuhur automaatselt välja, kui see ümber kukub. Seade töötab vaikselt, on energiasäästlik ning tänu vastupidavale konstruktsioonile sobib kasutamiseks mitmeteks hooaegadeks.


    Tehnilised andmed:

    • Võimsus: 2 kW
    • Kütteelement: PTC-keraamiline
    • Termostaat: jah
    • Ventilaator: jah
    • Ümberkukkumiskaitse: jah
    • Korpus: pulbervärvitud metall
    • Käepide: soojust isoleeriv plastkäepide



    Kasutusalad:

    • Töökojad
    • Garaažid
    • Kodumajapidamised
    • Kauplused ja müügiruumid
    40,50€
    Laost otsas. Tellides tarneaeg nädalat
    Timing lock set for Fiat/GM petrol engines
    03-11324

    NEO mootori ajastuse fikseerimiskomplekt Fiati ja GM-i bensiinimootoritele. Komplekt sisaldab põhilisi tööriistu mootori ajastuse seadistamiseks ning ajastuskomponentide lukustamiseks hooldus- ja remonditööde ajal. Tööriistad on paigutatud vastupidavasse hoiukohvrisse lihtsaks hoiustamiseks ja transportimiseks.

    57,00€
    Laost otsas. Tellides tarneaeg nädalat
    Padlock 60 mm, 3 keys
    03-85065
    Padlock 60 mm, 3 keys 85-065 by NEO TOOLS is a model equipped with 3 keys. The yoke with a diameter of 10 mm and dimensions of 60 x 20 x 85 mm provides adequate strength, and the seals used protect the mechanism from rain, thus increasing the weather resistance of the NEO TOOLS padlock. It is a practical protection which will prove useful in various applications - both indoors and outdoors.
    5,90€
    Laost otsas. Tellides tarneaeg nädalat
    Hub cleaning wheels, set of 6 pcs.
    03-11135
    Hub cleaning wheels, set of 6 pcs. NEO is a set designed for professional workshops, car service centres and home garages. The grinding wheel is a useful tool for servicing the car before replacing the brake disc. It allows for quick and easy cleaning of wheel hubs from rust and other dirt. Especially useful for hubs with pins, as it makes it easier to clean the areas around the pin. The set comprises: 6 replaceable grinding wheels ø 40 x 14 mm, arbor ø 6 x 29 mm.
    24,50€
    Laost otsas. Tellides tarneaeg nädalat
    Galvanised nails for pneumatic stapler (14-570), GA18, Type 300 (F), length 15 mm, 4000 pcs
    03-14651
    Electroplated nails for pneumatic stapler (14-570), GA18, Type 300 (F), length 15 mm, 4000 pieces 14-651 by NEO are steel nails, electroplated and therefore corrosion-resistant. They are designed for the NEO 14-570 pneumatic stapler. They are characterised by a length of 15 mm, type 300 (F), GA18. They are offered in a set of 4000 pieces. Nails recommended for all kinds of work with pneumatic staplers. They will be suitable for professional applications.
    4,10€
    Laost otsas. Tellides tarneaeg nädalat
    Kategooria
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    Laoseis
    Kaubamärk
    Kinnitus
    Laserkiirte värv
    Läbimõõt mm x pikkus mm
    Pinnakate
    Soovitatav kasutuskoht
    Peakuju
    Materjal
    Puuritav materjal
    Komplekt
    Klambri/Naela tüüp
    Kvaliteediklass
    Puuri tüüp
    Sobivus materjalile
    Otsiku tüüp
    Mark
    Suurus
    Tööriiete Suurus
    Lindil
    Jalanõude Suurus
    DIN
    Vahu tüüp
    Update cookies preferences