Bi-metal hole saw 46 mm

Water sandpaper 230 x 280 mm, P2000, 58T229 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.

Saw blade, widia, 185 x 30 mm, 36 teeth 57T218 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 36 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Two GRAPHITE guide rails with a length of 700 mm each, allow parallel penetration of the cutting disc and free and even guidance of the sawing and lapping machines. High quality aluminum strips are equipped with a rubber anti-splinter insert, teflon slides, and a special non-slip tape mounted on the underside of the strips, which significantly increases comfort and safety of work. On the first use, the rubber bar will automatically adjust to the tool used. It is possible to quickly connect two rails when cutting long materials using a self-aligning connecting element. It is possible to fasten the rails to the surface using dedicated clamps, which enables precise and accurate cutting of the material. The attached slats for the cut surface allow the user to focus on the work to achieve the desired cutting effect. Thanks to specially profiled grooves, the clamps do not interfere during work. The guide rail is dedicated for use together with the GRAPHITE circular saw.

GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.

Saw blade, widia, 130 x 30 mm, 24 teeth 57T205 by GRAPHITE, with an external diameter of 130 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.