Äskettäin katsotut tuotteet
02-54T506
The paddle wood drill, 22 x 152 mm 54T506 by GRAPHITE is a paddle type drill with Hex shank, characterised by a diameter of 22 mm and a length of 152 mm. The recommended maximum speed when working with it is 1750 rpm. The GRAPHITE brand drill bit is recommended for wood and plywood. It will prove useful in a domestic carpentry workshop.
02-57T310
Segmented diamond cutting wheel, 180 x 22.2 mm, dry 57T310 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
03-99054
NEO floodlight (ref. 99-054) is equipped with SMD LEDs of 100W and luminous flux of 8500 lumens. The body of the luminaire is made of aluminium. The IP65 protection level allows the floodlight to be used outdoors. Compliance with European safety standards is confirmed by the CE certificate.
02-57T305
GRAPHITE's 57T305 segmented diamond cutting wheel, 115 x 22.2 mm, dry 57T305 is a segmented dry cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
02-58T458
The Velcro fastening disc 125 mm x 3 mm, M14 thread, 58T458 by GRAPHITE is a Velcro fastening disc with a diameter of 125 mm and a thickness of 3 mm. Fitted with an M14 screw chuck, it allows mounting on angle grinders. Designed to work with sandpaper discs, in tasks with metal and wooden surfaces. The backing plate facilitates sanding of hard-to-reach areas. The maximum speed of this GRAPHITE accessory is 12,000 rpm.
