Graphite black H2 (up to 13-810, 13-815), 5 pcs

Velcro fastening disc 150 mm x 3 mm, M14 thread, 58T459 by GRAPHITE is a Velcro fastening disc with a diameter of 150 mm and a thickness of 3 mm. Fitted with an M14 screw chuck, it allows mounting on angle grinders. Designed to work with sandpaper discs, in tasks with metal and wooden surfaces. The backing plate facilitates sanding of hard-to-reach areas. The maximum speed of this GRAPHITE accessory is 8,500 rpm.

Flap wheel 80 x 40 x 6 mm, P40, 58T380 by GRAPHITE has dimensions of 80 × 40 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 8000 rpm and the working speed is 35 m/s.

GRAPHITE's 30mm bi-metal hole saw 56T706 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 285 rpm, Inox steel - 145 rpm, aluminium - 425 rpm, wood - 410 rpm, cast iron - 190 rpm, brass - 380 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

Paint masking tape blue 25 mm x 25 m 56-068 by NEO TOOLS is a 25 m long, 25 mm wide and 140 mic thick tape. It is characterised by its UV resistance and is designed for use both indoors and outdoors. It will be suitable for any type of paint. Thanks to its special structure, it eliminates run-off and leaves an aesthetically pleasing finish. Recommended for edge protection when painting, NEO TOOLS masking tape will be suitable for both professional tasks and personal use.

Sanding cloth GRAPHITE (ref. no. 55H878) in a sheet with dimensions 230 x 280 mm and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. . The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.