Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
Cutting wheel, alumina for metal/INOX 115 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T101 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
The 180 W delta orbital sander, 140 x 140 x 80 mm foot 59G336 by GRAPHITE is a 180 W tool with a 140 x 140 x 80 mm triangular-shaped foot and compatible 140 x 140 x 97 mm sandpaper. It reaches a speed of 13,000 min-¹ and has an amplitude of oscillation of 0.8 mm. The sander comes with 3 feet, sanding papers (9 pieces) and a spigot. The weight of the machine is 1 kg. This sander model is distinguished by its non-slip, comfortable-to-use handle and dust extraction system. It has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
The 450 W eccentric sander, 125/150 mm disc, case 59G349 by GRAPHITE is a machine with a 125/150 mm foot and 450 W of power. It reaches a speed of 7,000 to 13,000 rpm and has an amplitude of oscillation of 1 mm. The sander has a built-in dust extraction system to keep the workplace tidy. The infinitely variable speed settings (1-5 + maximum) allow greater control over the machine. The additional handle on the housing is also useful. The non-slip handle and weight of 1.21 kg allow one-handed operation. The switch lock function for continuous operation is designed for more complex tasks. The set includes: 1x working foot 125 mm, 1x working foot 150 mm, 6x sandpaper, hex key, rigid container with dust filter and carrying case. The GRAPHITE eccentric sander will be indispensable in the workshop when sanding and smoothing surfaces.
Metal cutting disc 230 x 1,9 x 22,2 mm, 41 A46-S-BF 5 pieces, film 55H579 by GRAPHITE consists of 5 pieces of metal cutting disc 230 x 1,9 x 22,2 mm. The product is designed for cutting metal. Thanks to its advanced design and thickness reduction, it allows you to significantly reduce working time. Ensures a high level of safety thanks to compliance with the EN12313 standard. The GRAPHITE brand blade is recommended for professionals and DIY enthusiasts.
The 240 W oscillating sander, 110 x 100 mm foot 59G322 by GRAPHITE is a 240 W tool with a 110 x 100 mm foot. It reaches a no-load speed of 13000 min-¹ and has an amplitude of oscillation of 0,8 mm. The sander comes with 3 feet (square, rectangular and triangular), sanding papers (9 pieces) and a dust container with filter. The weight of the machine is 1.2 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the possibility of quickly changing the sanding paper. It has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Cutting disc GRAPHITE (no ref. 55H697) outside diameter 115 mm outside diameteand internal 22.2 mm. The edges of the disc are covered with tungsten carbide, thanks to which it is very good at cutting soft materials, including: wood, wooden boards, chipboards, bricks, plastic, plasterboard.Dedicated to work with angle grinders.
Versatile GRAPHITE impact drill with 850 W motor is perfect for materials like wood, plastics, metal and ceramics. After switching to impact mode it also allows for drilling in materials like concrete or brick with equal ease. The drill reaches speed up to 3000 rpm during operation and with impact mode on its speed reaches 48 000 impacts per minute. The power tool features function of clockwise and counter-clockwise head rotation. Ergonomic design, small weight and long power cord make operation in hard to reach areas definitely easier. Prolonged operation in hard working conditions is easier thanks to switch lock function for continuous operation at uniform speed. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.
Cutting disc, alumina for metal/INOX 125 x 1.0 x 22.2 mm, 41 A60-T-BF, 110 pieces, carton 57T126 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). The dimensions of the tool are 125 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard and is offered in a packaging of 110 pieces.
Cutting wheel, alumina for metal/INOX 115 x 1.0 x 22.2 mm, 41 A60-T-BF, 57T100 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Demolition hammer, 30 mm hex chuck, 1700 W, case 58G868 by GRAPHITE is a 30 mm hex chuck tool with 1700 W power for demolition and renovation work. Offered in a sturdy carrying case together with accessories - 1x chisel, dust cover, grease reservoir. The hammer has an impact energy of 45 J and a chisel strike rate of 1500 per minute. It has a 4m power cable and has a total weight of 14kg. It is a robust tool with a housing that is resistant to mechanical damage and high temperatures. The demolition hammer with handle from the GRAPHITE brand is recommended for professionals.
Cutting disc for metal GRAPHITE (ref. no. 55H574) with diameters 115 mm allows to advanced design and greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work.
Metal cutting disc 115 x 1,0 x 22,2 mm, 41 A60-T-BF 10 pieces, film 55H577 by GRAPHITE consists of 10 pieces of metal cutting discs with parameters 115 x 1 x 22,2 mm. The product is designed for cutting metal. Thanks to its advanced design and thickness reduction, it allows you to significantly reduce working time. Ensures a high level of safety thanks to compliance with the EN12313 standard. GRAPHITE brand discs are recommended for professionals and DIY enthusiasts.
18V GRAPHITE Energy+ cordless inflator compatible with 18V Li-Ion Energy+ batteries. It is adapted to inflatable elements with a screw valve; to inflatable elements with a valve to pump out the air. The design of the power tool is characterized by high ergonomics. The handle is covered with non-slip material, so that the compressor lies securely in the hand. The set includes 3 different nozzles.
The 380 W orbital sander, 115 x 230 mm foot 59G329 by GRAPHITE is a 380 W tool with a 115 x 230 mm foot. It reaches speeds of 7,000 to 13,000 min-¹. Sandpaper and a dust container are offered with the sander. The weight of the machine is 2.1 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the ability to quickly change the sanding paper. It features a locking function for continuous operation. The sander has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Handy 450 ml thermos made of stainless steel. It has a wide, ergonomic mouthpiece, making it easy to drink directly from the container. In addition, the thermos is equipped with a lock against accidental opening, protecting its contents during transport. The design of the thermos makes it easy to use with one hand.
Gypsum sander 800 W, 215 mm, led, case 59G265 by GRAPHITE is an 800 W sander with LED lighting and telescopic handle, designed for working on plaster surfaces. It features infinitely adjustable head rotation from 800 to 1800 rpm. The sanding disc has a diameter of 215 mm. The long 5-metre cable and flexible suction hose allow work over a wider range. The dust extraction system, on the other hand, ensures that a hoover can be connected to keep things tidy. Changing used abrasive paper is easy due to the Velcro attachment. The sander is offered with sandpaper, suction hose. A rubber protective pad at the handle area and an additional working disc shielded by a brush guard contribute to the safety of the tool's use. Compliance with European standards is ensured by CE certification.
GRAPHITE cordless impact driver, compatible with 18V Li-Ion GRAPHITE Energy+ batteries. The device is designed for screwing and removing screws and bolts in wood, metal and plastics. It allows you to work at high speeds (up to 2200 rpm) and provides high torque (180 Nm). The torque is generated in the form of an instantaneous peripheral impact, which helps to minimize the impact of the device on the operator's hand during screwing. The tool holder 6.35 mm (1/4”) is designed to work with the most popular type of screwdriver bits. The device is equipped with an electric motor brake that allows quick stopping of the spindle and LED illuminating the work place. Ergonomic shape of the handle and an optimized total length of the driver allow for effective work in all conditions.
Cutting disc, alumina for concrete 115 x 2 x 22.2 mm, 41 C46-R-BF, 57T115 by GRAPHITE is a tool designated type 41 C46-R-BF. The flat disc features a diameter of 115 mm, a thickness of 2 mm and a mounting hole diameter of 22.2 mm. It has been adapted to operate at a maximum speed of 13,300 rpm and an operating speed of 80 m/s. The product complies with EN 12413 and, being designed for cutting concrete, will work well in any do-it-yourself workshop.
The 260 W orbital sander, 90 x 187 mm foot 59G326 by GRAPHITE is a 260 W tool with a 90 x 187 mm foot. It reaches speeds of 7,000 to 13,000 min-¹. 2x sanding papers and a dust container are offered with the sander. The weight of the machine is 1.7 kg. This sander model is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the ability to quickly change the sanding paper. It features a locking function for continuous operation. The sander has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
