Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
GRAPHITE jigsaw blades are used for semi- precise cutting of wood and plastic. T shank allows to use the blades in all jigsaws with BOSCH holder and universal holder. Use of CrV steel (chromium- vanadium) gives high elasticity and resistance to high temperatures. Polished side surfaces of the blade reduce friction and blade heating during cutting.
Sanding cloth GRAPHITE (ref. no. 55H869) in a roll, 2.5 m long, 115 mm wide and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blade for reciprocating saw GRAPHITE about the length 228 mm and 8 with teeth an inch long intended for cutting, among others metal, fiber cement boards, glass fiber reinforced composites, wood with nails, aerated concrete and red brick using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Solid carbide saw blade GRAPHITE (ref. no. 55H601) with diameters 185 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
The GRAPHITE Widia saw blade (ref. 55H693) has an outside diameter of 235 mm and is made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Velcro sand paper GRAPHITE (ref. no. 55H781) with granulation K180 i diameter 225 mm, used for grinding gypsum surfaces with extension grinders. The discs have perforated holes on the entire surface, thanks to which the sanding dust is easily drained. Velcro fastening allows quick replacement of used abrasive disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H604) with diameters 180 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
GRAPHITE metal drill with 4.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
A set of HSS-CNC twist dril GRAPHITE (Ref. 55H088) with diameters ranging from 1.5 to 6.5 mm, made of high-alloy high speed steel using CNC machining. Ideally suited for drilling precise holes in all types of metals.
GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.
Water abrasive paper GRAPHITE (ref. no. 55H896) in a sheet with dimensions 230 x 280 mm and granulation 60. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H893) in a sheet with dimensions 230 x 280 mm and granulation 220. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H023-10) with diameters 3.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Sanding paper GRAPHITE (ref. no. 55H862) in a roll, 2.5 m long, 115 mm wide and granulation 100. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H606) with diameters 300 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Sanding paper GRAPHITE (ref. no. 55H866) in a roll, 2.5 m long, 115 mm wide and granulation 220. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Abrasive sponge GRAPHITE (ref. no. 55H913) with dimensions 120 x 95x 10 mm and granulation 100. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on both sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H028-10) with diameters 4.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.
Velcro sand paper GRAPHITE (ref. no. 55H725) with dimensions 115 x 230 mm and granulation 180, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
