Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
Water abrasive paper GRAPHITE (ref. no. 55H897) in a sheet with dimensions 230 x 280 mm and granulation 80. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE staples (ref. 56H755) GA18, Type 90, in length 38 mm, for use with many types of staplers, incl. for 2in1 Energy + 18V Li-ion battery stapler (ref. 58G081). Made of galvanized steel, which is more resistant to corrosion and mechanical damage. Staples are widely used, incl. in upholstery, construction or carpentry. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Velcro sand paper GRAPHITE (ref. no. 55H944) with diameter 125 mm and granulation K240, with holes. Dedicated for sanding paints, varnishes, wooden and metal surfaces. Holes allow to use in sanders with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital and eccentric grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Chisel GRAPHITE with SDS Max shank is made of hardened carbon steel and is perfect for mechanical chiselling holes in concrete, stone and brick materials.
Sand belt GRAPHITE (ref. no. 55H788) with granulation K60 and size 75 x 457 mm. Dedicated to grinding wood, wood-based materials, metals and plastics. Product with X-cloth backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 4.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Set of masonry drills GRAPHITE (Ref. 57H570) with diameters range 6.0 to 10.0 mm and SDS plus shank, allow for efficient drilling in concrete and ceramic materials by hammer drill .
Solid carbide saw blade GRAPHITE (ref. no. 55H603) with diameters 160 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Velcro sand paper GRAPHITE (ref. no. 55H726) with dimensions 115 x 230 mm and granulation 240, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 3.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Fibra sanding disc GRAPHITE (ref. no. 55H855) with outer diameter 125 mm and granulation 40. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H610) with diameters 210 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for cutting oaluminium materials. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Abrasive sponge GRAPHITE (ref. no. 55H920) with dimensions 70 x 25 x 10 mm and granulation 180. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 3.2 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
The GRAPHITE impact bit set (ref. 56H562) includes 10 bits PH1/2/3, PZ1/2/3, TX25/27/30/40, total length 50 mm. These are durable bits designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. Set with a carabiner for attaching to the belt loop. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Fibra sanding disc GRAPHITE (ref. no. 55H857) with outer diameter 125 mm and granulation 80. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 12.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H055) with diameters 10.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Solid carbide saw blade GRAPHITE (ref. no. 55H611) with diameters 250 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for cutting oaluminium materials. Thanks to included adapter rings it is possible to use the blade in most of saw models.
