Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
Glass drill bit 4 mm 54T412 by GRAPHITE characterised by a diameter of 4 mm and an overall length of 68 mm. Equipped with a 3.5 mm cylindrical shank. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P80, 5 pieces, with 8 holes 58T290 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
The GRAPHITE 57T303 solid diamond cutting wheel, 180 x 25.4 mm, wet 57T303 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.2 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
GRAPHITE's SDS Plus double helix concrete drill bit 10 x 350 mm 56T119 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10mm and an overall length of 350mm and a working length of 265mm. It will prove useful for many tasks around the home and in the workshop.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry 57T317 by GRAPHITE is a turbo dry cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
HSS-G metal drill bits, 2 - 8 mm, set of 13 pieces, 54T920 by GRAPHITE are metal drill bits characterised by diameters of 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm. They are made of HSS-G high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Turbo diamond cut-off wheel, 115 x 22.2 mm, dry and wet 57T316 by GRAPHITE is a dry and wet turbo diamond cut-off wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The spiral wood drill, 14 x 230 mm 54T554 by GRAPHITE is a drill bit designed for working with wood and plywood, equipped with a hexagonal chuck, and with a spiral design. It features a diameter of 14 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.
Sanding discs, perforated, Velcro with holes 225 mm, P120, 5 pieces 58T274 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
GRAPHITE's delta sanding papers, Velcro 93 x 93 mm, P60, 5 pieces, with 6 holes 58T325 are papers available in a set of 5 pieces with 6 holes, for metal, wood and plastics. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
HSS metal drill bit, DIN 340, 13 mm, 54T912 by GRAPHITE is a metal drill bit characterised by a diameter of 13 mm, an overall length of 205 mm and a working part length of 134 mm. It is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It features compliance with DIN 340 and is suitable for any DIY enthusiast.
Jigsaw blade, 6 TPI, HCS, U-shaped handle, 2 pieces, clean cut 57T524 by GRAPHITE is a jigsaw blade with 6 TPI tooth density, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 4 mm. Suitable for cutting softwood, chipboard, carpenter's plywood and fibreboard 10-45 mm thick. The GRAPHITE brand blade enables clean cutting.
The combination disc for 59G371, 57H696 by GRAPHITE is a disc designed for the paving machine with part number 59G371. The 150mm diameter triple set, with a 22.2mm mounting hole, is designed for grooving in concrete - no chiselling required. The cross-shaped segments create a clean 30 mm wide slot, making it easy to achieve even furrows. The GRAPHITE saw blade features 36 segments with a diamond segment height of 9.5 mm and an overall width of 27 mm, and has a maximum speed of 10,200 rpm. The product meets the requirements of EN 13236, which confirms its suitability for working with concrete.
GRAPHITE's 33mm 56T738 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
The Hex 3.0 mm 56T400 concrete drill bit by GRAPHITE is a hex shank HEX drill bit with a diameter of 3 mm, an overall length of 60 mm and a working length of 14 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
The Hex 4.0 mm 56T401 concrete drill bit by GRAPHITE is a hex shank HEX drill bit with a diameter of 4 mm, an overall length of 75 mm and a working length of 23 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
Iron sanding papers, Velcro 98 x 140 mm, P180, 5 pieces, with 5 holes 58T321 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
Sanding discs, perforated, Velcro with holes 225 mm, P80, 5 pieces 58T272 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
The 10 TPI, HCS, 65 mm 57T508 plunge-cutting blade for the multifunction machine by GRAPHITE is a tool made of durable carbon steel (HCS), with a working width of 65 mm and 10 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 2.5 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.
The TiN Universal Drill, 12 mm 54T409 by GRAPHITE is a drill bit coated with TiN and fitted with a cylindrical chuck. It features a diameter of 12 mm and an overall length of 85 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
